ELGA MEDICA PRO R-120 REVERSE OSMOSIS WATER PURIFICATION SYSTEM

ELGA MEDICA PRO R-120 REVERSE OSMOSIS WATER PURIFICATION SYSTEM

This unit is from a Government of Alberta Facility and was working when it was pulled out. It appears to be missing 2 filters on the right hand side.

The CENTRA has revolutionised the way that pure water is produced, stored and distributed. Instead of a traditionally engineered central lab system, comprising of an untidy grouping of components and pipework, you can now have just one integrated system box. The CENTRA-R120 is a complete water purification, storage, control and distribution system delivering up to 120 liters per hour of water which has been purified using reverse osmosis, UV photo-oxidization, optional deionization and 0.2 µm filtration.• The compact design provides flexible installation options for new buildings and refurbishments. The CENTRA’s very small footprint means that it can be placed close to the work areas, avoiding the negative cost and design implications of unnecessarily long pipe work • Reliable, continual supply of pure water using unique access controls, leak detection systems and full AV alarms with optional building management system (BMS) connectivity • Optimized water purity through use of in-line UV oxidation, deionization and 0.2 µm filtration • Fast and easy sanitization ensures that optimum purity is maintained throughout the life of the product.

Treated Water Specifications Model CENTRA-R 120 Make-up rate @15°C 120 l/hr Delivery flowrate - maximum 10 l/min @ 22 psi (1-5 bar) Inorganics (resistivity@ 25OC) >10 MΩ-cm Organics (TOC) - typical <20 ppb 1 Bacteria - typical <1 CFU/1ml 1 Particles 0.2 µm filter 1 1 Specifications for CENTRA fitted with UV and optional deionization cartridge and microfilter. Without the deionization cartridge the CENTRA will provide RO, permeate-grade III water with greater than 95% rejections of organics. TVC levels will typically be less than 5 CFU/ml and TOC less than 100 ppb. With the microfilter TVC will fall typically to less than 1 CFU/ml and there will be particle removal to 0.2 µm. Specifications are for a system fed with a suitable water supply and installed, operated and sanitized according to the operator manuals Dimensions and weights Dimensions Height 820mm (32.8in), 834mm (33.4in) including castors, Width 794mm (31.8in), Depth 470mm (18.8in) Supply weight 60kg Operational weight 117kg Installation Floor/bench Feedwater Requirement Source Tap water as detailed below Contaminant Conductivity 2000 µS/cm* Hardness <250 ppm as CaCO3 Free chlorine <4 ppm Cl2 Chloramine <1 ppm as Cl2 Silica <30 ppm SiO2 Fouling Index <10 FI Iron/manganese <0.1 ppm Fe/Mn Organics <3 ppm TOC Temperature 4 - 40°C (Recommended 15 - 25°C) Flowrate (maximum requirement @15°C) 9 l/min Drain requirements (gravity fall with air gap) 20 l/min Feedwater pressure 6 bar (90 psi) maximum, 2 bar (30 psi) minimum Failure to comply with the feedwater pretreatment recommendations will affect the life and performance of key components and may invalidate the warranty. Feedwater requirements are specified for units fitted with a Protek L2 pretreatment cartridge. If feedwater purity is variable or values are outside any of the above ranges, additional pretreatment is recommended to be installed in the feedwater supply to the unit.

**Pick up by appointment only - located in SE Calgary Monday to Friday 9am to 4pm 587-ALBERTA(252-3782) Surplus Alberta.com