|Address||216 Franklin Dr, Stratford, ON N5A 8A2, Canada
|For Sale By||Owner|
STAINLESS STEEL BODY WITH STAIN-FINISH!
8 items of brand new with user manual are available, if you buy 4 items in once, the total price will be $240, if you buy all 8 items in once, then the price will be $440;
1 item = 1 package
*Sope is not included
Bobrick - ConturaSeries, washroom Soap Dispenser, Model: B-4112
Size: H.6-1/8” x W.7” x D.3-5/16” / H.155mm x W.180mm x D.85mm
Container — Body is 18-8, type-304, 20-gauge (1.0mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Front has
same degree of arc as other Bobrick ConturaSeries washroom accessories. Radius on corners and edges complement other ConturaSeries
accessories. Back plate is 22-gauge (0.8mm) stainless steel with 20-gauge (1.0mm) stainless steel mounting bracket attached. Container body
and back plate are epoxy-sealed to prevent warping and leakage. Concealed wall plate is 20-gauge (1.0mm) stainless steel. Equipped with a
plastic soap refill-indicator window and a locked, hinged stainless steel lid for top filling. Capacity: 40-fl oz (1.2-L).
Valve — Black molded plastic push button. Soap head-holding mushroom valve. Stainless steel spring. U-packing seal and duckbill.
Antibacterial-soap-resistant plastic cylinder.
Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps. To prevent corrosion, use only chloridefree
pH-netural liquid soaps. Valve operates with one hand, without tight grasping, pinching, or twisting of the wrist, and with
less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.). Window
indicates when refill is required. The locked, hinged lid opens for top filling with special key provided. Concealed, vandalresistant
Secure wall plate to the wall with screws furnished at points indicated by an S. Slide mounting bracket of container down
onto wall plate and secure unit with furnished locking-screw. For plaster or dry wall construction, provide concealed backing
to comply with local building codes, then secure unit with screws furnished. For other wall surfaces, provide fiber plugs or
expansion shields for use with screws furnished, or provide 1/8'' (3mm) toggle bolts or expansion bolts.
Note: Surface-mount the dispenser plumb and true with valve 6'' (152mm) to right or left of lavatory center. Provide 4''
(102mm) minimum clearance from the lid to the underside of any horizontal projection. Push buttons should be located 44"
(1120mm) maximum above the finish floor. Where a high reach is over an obstruction (countertop), the high forward reach
shall be 48” (1220mm) maximum where the reach depth is 20” (510mm) maximum. Where the reach depth exceeds 20”
(510mm) the high forward reach shall be 44” (1120mm) maximum and the reach depth shall be 25” (635mm) maximum.
Surface-mounted soap dispenser shall be type-304 stainless steel with satin-finish. Corrosion-resistant valve shall dispense
commercially marketed all-purpose hand soaps. To prevent corrosion, use only chloride-free pH-netural liquid soaps. Valve shall
be operable with one hand and with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines
(including ADAAG in U.S.A.). Front of soap dispenser shall have same degree of arc and match other Bobrick ConturaSeries
accessories in the washroom. Radius on corners and edges of soap dispenser shall complement other Bobrick ConturaSeries
washroom accessories. Container body and back plate shall be epoxy-sealed to prevent warping and leakage. Soap dispenser
shall have concealed, vandal-resistant mounting. Locked, hinged stainless steel lid for top filling shall require special key to
open. Capacity shall be 40-fl oz (1.2-L).