Roller Conveyor

Roller conveyor sections from a Hercules aircraft cargo management kit New old stock

Rollers spaced at 10 inches on center Rollers are 4-3/4 inches wide and 2-1/4 inches diameter Sections are 6-3/8 inches wide Middle sections weigh on average, 2.76 pounds per foot Frames are magnesium

Priced per section @ $6.25 per roller. Full Kit $1250 Kit includes: 2 of section 9, 2 of section 10, 1 of section 11, 1 of section 12, 4 of section 13, 6 of section 14, 2 of section 15, 2 of section 16 Sections 9 and 10 are mirror images of each other, have a heavy roller on one end and built to connect to the other sections on the other end, 135 inches long, 14 rollers ($87.50 ea) Sections 11 and 12 are mirror images of each other, built to connect in-line, 140 inches long, 14 rollers ($87.50 ea) Section 13 built to connect in-line, 120 inches long, 12 rollers ($75 ea) Section 14 built to connect in-line, 100 inches long, 10 rollers ($62.50 ea) Sections 15 and 16 are mirror images of each other, have 1 heavy roller on one end and 2 closely spaced heavy rollers on the other end, not built to connect on either end, 120 inches long, 14 rollers ($87.50 ea)

Details on the 2 types of rollers: The "lighter" ones have a 1/2" shaft, with bushings to adapt it to the bearing inside diameter (25mm). The bearings are Koyo 6205Z, 1 in each end. The bearings drive in up to a shoulder. The roller itself is 2-1/4" diameter, 4-3/4" wide and 0.150" thick aluminum. The "heavier" ones have a 19mm shaft and 2- Torrington 12NBL2830YJ MS24466-12 bearings. Roller sleeves have the same exterior dimensions, but are 0.185" thick aluminum measured on the outside end.

1 full kit available plus a partial kit

Items are located near Vermilion, Alberta

Check My Other Ads!