FOUR POST CAR LIFT / 4 POST HOIST ATLAS - CLENTEC

ATLAS GARAGE PRO 8000 EXT

- CLENTEC ATLAS -

- SALES - SERVICE - REPAIR-

- ST. CATHARINES - 905 207 2081 - TORONTO - 647 207 2081 - LONDON - 226 236 7379 / 226 456 7379

FOUR POST CAR LIFT - ATLAS GARAGE PRO 8000 EXTL

Atlas Auto Equipment is proud to announce the arrival of the new Atlas Garage Pro 8,000 EXT-L (extra long and slightly wider) Service/Storage Lift. This lift is 20 inches longer (wheelbase) and 3 inches wider than the Atlas Garage Pro 8000 EXT. Or to compare to the original, this lift is 20 inches longer (wheelbase), 3 inches wider, and 14 inches taller than the Atlas Garage Pro 8000! The extra runway length will accommodate almost all of the longer wheelbase pickup trucks, except duallys. This is because the dual rear wheels are TOO WIDE to fit between the column lock assemblies. Check out the Atlas Garage Pro 9000 or the Atlas 409-HP if you need a portable lift for your dually !

All Atlas portable four post lifts (8,000 lb. capacity) are designed and built for use by Mr. Homeowner or restoration shops. These lifts are not designed to work in commercial repair shops that raise and lower a lift several times per day.

HIGHLIGHTS ;

• 8,000 lb. Capacity • Diamond Plated Runways • Atlas® Powder Coat Finish • Lock Ladder Design •Single Point Lock Release • Four Wheel Stops Included • Double Lock Safety System • Three Drip Trays Included • Steel Approach Ramps Included • Anchor Bolts Optional (Sold Separately) • Caster Kit With Polyurethane Wheels (Optional) • Steel Jack Tray (Optional) • Rubber Wheel Chocks (Optional) • 2 Year Structural, 1 Year Hydraulic Warranty • Perfect For Storing Or Working On Vehicles • Shipping Weight: 1,900 lbs.

SPECIFICATIONS ;

Capacity 8,000 LB Lifting Height 84 ½" (7' ½") Overall Width (Without Motor) 108" (9') Overall Width (With Motor) 116 ½" (9' 8 ½") Length Between Columns 176 ½" (14' 8 ½") Overall Length with Approach Ramps 227" (18' 11") Overall Length without Approach Ramps 195" (16' 3") Approach Ramps 36 3/4" (3' 3/4") x 19 5/8" (1' 7 5/8") Total Runway Width 22" (1' 10") Runway Length 185" (15' 5") Runway Thickness 4 ½" Width Between Runways 38" (3' 2") Width Between Runway Rails 34" (2' 10") Outside Runway to Outside Runway 77 3/4" (6' 5 3/4") Clearance Under Runways Max: 80" (6' 8") Size of Column 6 ¼" x 3 3/8" Clearance Between Columns 98" (8' 2") Base of Column 9 5/8" x 11 ½" Height of Columns 97 ½" (8' 1 ½"); 100" (8' 4") with Bolts Maximum Wheel Base 173" (14' 5") Drive Thru (Outside of tire to outside of tire) 84" (7') Cable Diameter .350" Gauge Of Steel 6 Gauge (.1875"/ 3/16" / 4.75mm) Motor 110 Volt Oil Requirement 3-5 Gallons AW32/AW46 Shipping Weight 1,900 LB.

11 Locking Positions Under Runway (+/ - 2") 19" (1' 7") 25" (2' 1") 31" (2' 7") 37" (3' 1") 43" (3' 7") 49" (4' 1") 55" (4' 7") 61" (5' 1") 67" (5' 7") 73" (6' 1") 79" (6' 7")

11 Locking Positions Top Of Runway(+/ - 2") 24 1/4" (2' 1/4") 30 1/4" (2' 6 1/4") 36 1/4" (3' 1/4") 42 1/4" (3' 6 1/4") 48 1/4" (4' 1/4") 54 1/4" (4' 6 1/4") 60 1/4" (5' 1/4") 66 1/4" (5' 6 1/4") 72 1/4" (6' 0 1/4") 78 1/4" (6' 6 1/4") 84 1/4" (7' 1/4")

Please call for Special Pricing

DELIVERY / INSTALLATION AVAILABLE

- CLENTEC ATLAS -

- SALES - SERVICE - PARTS -

- ST. CATHARINES - 905 207 2081 - TORONTO - 647 207 2081 - LONDON - 226 236 7379 / 226 456 7379