|Address||Gatineau, QC J8Y6V3
|For Sale By||Owner|
9x8 DGS-9802 multiswitch with power supply Digiwave barely used. Allow you to use multiple satellite source and merge the signal into a single cable that you can output to several receivers.
Was used only for a few months and removed it when moving. Working perfectly, comes with AC adapter. Worth over 150$ brand new + taxes
Shipping Weight: 970 grams, 2 pounds 2.2 ounces
Shipping Dimensions: 14.50”x7.06”x2.13”
DGS-9802 replaces DGS-98A which is no longer available.
External switching power supply (Linear): 90 to 264 VAC/47 to 63 Hz.
Switching Voltage: 15 ± 1V.
Switching Commands: 13V, 18V, 13V/22KHz, 18V/22KHz, DisEqC 2.0
Frequency response: 47-2150 MHz.
Inputs/outputs: F connectors, female.
Inputs: 8 Satellite!, 1 terrestrial off-air local TV. 'F' connectors.
Outputs: 8. 'F' connectors.
Sat (IMA3 35dB) EN50083-3: 100dBμV
Terr (IMA3 60dB) EN50083-5: 84dBμV
Nice big grounding terminal.
Insertion Loss: Terrestrial: 47-862 MHz., -3dB. Satellite: 950-2150 MHz., -1dB.
Terr 47-862MHz: ± 2dB.
Sat 950-2150MHz: ± 2dB.
Terr to Sat: 30 dB.
Sat to Terr: 30 dB.
Cross polar. H/V (SAT): 26 dB.
Terr 47-862MHz: 26 dB.
Sat 950-2150MHz: 30 dB.
Terr input 47-862MHz: 11 dB.
Terr output 47-862MHz: 10 dB.
Sat input 950-2150MHz: 14 dB.
Sat output 950-2150MHz: 10 dB.
LNB power supply: max. 1000 mA.
Temperature range: 25° C. - +60° C.
This only works with one dual lnb output going to 13V input and one to 18V input. Both sides of lnbs have to be used. For each satellite in the receiver menu set the 22 kHz to off or on. 2 quatro or 4 dual/twin output lnbs go to 8 inputs. Watch 4 satellites plus local TV on 8 receivers. Indoor installation preferred. Enclose in a proper enclosure for outdoors so water doesn't get in. Works fine with general satellite receivers. LNBs with switches may not work (e.g. DishPro).