|Address||Oakville, ON, Canada
4 Time Winner of Homestars “BEST OF” Awards including 2017|
If you purchased your own opener, we will install it professionally for $95
We install these brands: Liftmaster, Chamberlain, Craftsman, Genie, Skylink, Ryobi, Jackshaft
If you’re looking to purchase an opener from us, we supply LiftMaster Brand starting at $350+hst installed for ½ HP Chain Model 8365.
Check out our website: www.easyflipgaragedoors.com
Email us at: firstname.lastname@example.org
Call us at 416-477-2478
Repair your broken garage door or opener for a flat rate of $39 plus the cost of parts IF ANY ARE REQUIRED. This covers all service fees, assessment fees and all labour costs no matter how long the job takes.
Repair any of these problems for a flat rate of $39:
ALL DOOR PROBLEMS SUCH AS:
Rusted Bottom Brackets
Broken Torsion Tube
ALL OPENER PROBLEMS SUCH AS:
Chain came off
Opener not working
Remote not working
Keypad not working
Opener won’t open or close
Safety eyes problem
Garage Doors: We carry a wide range of Steel garage doors to choose from. We have Traditional and Carriage Style, Insulated, Non-insulated, with or without windows. Lots of colours to choose from including woodgrain finishes. Call us for a free in-home quote or quotes over the phone. Prices start from $596+hst Installed (traditional style, non-insulated and no windows. Your choice of colour and panel design).
Opener Installation $95/opener: We install all brands of openers.
Garage Door Tune-Up / Maintenance $69: Your garage door(s) should be maintained at least once a year. Garage Door tune up includes tightening of the hardware, testing the door balance, inspection of the rollers, weatherstrip, cables, safety feature and lubrication of the moving parts. By doing so, will add years of seamless operation to your system.
Most Common Garage Door / Opener Problems:
Broken or Loose Cables
It is through the cables that we find the high pressure work of the spring getting transferred to lift the door. It also bears the weight of the door when the door gets closed. The cable can break or come off of its spool.
Symptom(s): The door opens or closes unevenly or shows visible signs of cables fraying or becoming loose, or disconnected.
Garage Door Rollers need to be reset or replaced
The garage door rollers are responsible for the smooth operation of the doors. These rollers are held in position with the help of brackets that are fixed to your garage and to the track. Those garage doors over a decade old have faced several environmental factors and build up from dust, lubricants and oil. All these factors can start to take their toll and wear out those rollers. The quality of the rollers gets hampered and they can slip off the track from time to time.
Broken Garage Door Springs
The most common issue that you will face with your garage is broken spring and this can lead the door to stop working. The torsion springs actually are the main component in the garage door opener and the hardest working part of the whole Garage door system. The opener does only a fraction of the actual lifting that is necessary to move your garage door. Therefore, if the torsion spring stretches and breaks, the garage door opener will not be able to function and open the door.
Symptom(s): The symptoms of trouble with broken garage door springs include the door operating.
There are 2 kinds of springs:
1) Torsion Spring -These springs are placed just above the garage door and can expand or contract as the door raises or is lowered. It looks like firmly coiled springs.
2)Extension Spring -These springs are positioned on the right and left sides of the garage doors and can stretch out and expand as the garage door lowers and contracts when opening.
Do not try to operate the door as this is a safety hazard. You could find the door crashing down or even injuring someone. Get in touch with us who will fix the issue within the same day or within 24 hours.
Safety sensor malfunction or miss-alignment
Another common issue with a garage door is that it stops and then reverses if you want to close it. It also makes some clicking noise, accompanied by the opener light flashing. This clearly means that the safety sensors are out of alignment and the garage door will not close. As one side of the track acts as the receiving eye sensor and the other side sends the signal, if any one of these sensors are knocked out of alignment, the receiving end will not get the signal. This triggers the door to turn around.
Symptom(s): The door goes back up when you hit the wall button in order to close the door. You have to press the button down till the door shuts