|Address||Minden, ON K0M2K0
|For Sale By||Business|
ZILMET HYDRO-PRO EXPANSION TANKS for extra potable water storage and expansion - HOT or COLD.
Reduce the cycling of your water pump.
Made in Italy:
Compact design with a seamless diaphragm, that never stretches or creases. There are no bubbles or corners to trap sediment, inhibiting bacterial growth; international approvals for use with potable water. Wide range available (from 2 to 600 litres).
Protected precharge valve. Durable steel tank. Deep-drawn steel shell for extra strength. MIG welding process eliminates interior rough spots and sharp edges and prevents damage to diaphragm and liner.
Pre-pressurized air chamber. Butyl diaphragm isolates water from air. Exclusive internal epoxy coating: no corrosion. External epoxy-polyester coating : no rusting. Mild steel connection.
The Zilmet HYDRO-PRO tank leaves the factory already tested and pre-pressurized. Air and water do not mix, eliminating any possibility of “water-logging” through loss of air to the system ; no corrosion.When the pump starts, water enters the tank as system pressure passes the pressure precharge. Only usable water is stored. When the pressure in the chamber reaches the maximum system pressure, the pump stops working. The tank is filled to its maximum capacity. When water will be needed again, pressure in the airside will push water into the system. Since the Zilmet HYDRO-PRO tank does not water log and delivers all possible water, minimum pumps starts are assured.
ONE TANK LEFT (and 75 liter water tank - see other ad):
80L (1 in stock) - $300 plus HST