À propos de l'annonceur
Accédez à votre compte ou créez-en un pour consulter les détails de cet annonceur, comme :
  • sa date d’adhésion à Kijiji;
  • son temps de réponse;
    Fermer
    Le temps de réponse est calculé en fonction du temps habituel que l'annonceur met à répondre à ses messages, soit par courriel ou par la messagerie de l'app. En savoir plus.
  • ses autres annonces; et
  • son numéro de téléphone (si disponible).
Contacter l'annonceur

Avis Sécuritaire Important:

Évitez des situations de fraude en rencontrant vos vendeurs personnellement pour payer vos articles. Kijiji n'offre aucun service de transaction ou de paiement.Conseils sécuritaires de Kijiji

Date de l'affichage 15-nov.-16
Prix
175,00 $
Adresse Dollard-Des Ormeaux, QC H9A3A9
Afficher la carte

À vendre par Particulier

*Mixer has the majority of the scratches and dings. The CH.4 pan pot is missing it's top cap. The back panel of the mixer is dented in, however everything works including the pots and faders. Enjoy. · · * Teac 2-A Mixer + MB-20 meterbridge * --------- This is a 6 input / 4 output mixer designed for true multi-channel recording. Each channel has seperate input selectors, tone control, channel assign selectors with pan, and input faders. There is also a MASTER output fader control. · Input selector switch for mic/line or mic att, which activates a 20dB attenuator pad located, before the mic preamp stage. · Channel assignments buttons color coded for the 4 different output busses. Any signal from a input channel can be assigned to any, or all of the output channels. When more than one channel is assigned, Pan control is engaged = the ability to move the sound from extreme left or right in the sound spectrum or anywhere between. · Tone-controls: Variable treble control +/-12dB. Variable bass control +/-12dB. · Crosstalk: Greater then 50dB. · Overall distortion(input to output)= 0.1% THD maximum at nominal -10dB output. · Fader attenuation: Greater then 60dB. · Mic impedance:150~10K. · Input impedance:50K or higher. · Input level: -10dB (0.3V) · Line output/Aux.Output: Load impedance:10K or higher unbalanced. Output level: -10dB (0.3volt) · Signal to noise ratio: One input= greater than 62dB,WTD. 6 inputs = greater than 55dB,WTD. · Frequency response: 30Hz~20KHz,+/-2dB. · Cue output: Load impedance: Greater than 50K. Level: -20dB (0.1V) with nominal input. · Buss input: Input impedance: 15K. Nominal level: -10dB(0.3V) · Accessory Send/Receive: Send load impedance:Greater than 10K. Nominal send level: -10dB(0.3V) Receive impedance: 15K. Nominal receive level: -10dB(0.3V) · (6)MIC IN = 1/4 Phone plug. · (6)LINE IN = RCA. Normally you would patch the output of your reel to reel here (line 1-4) and the master recorder to (line 5-6), but you have more options because the meterbridge. · (4)LINE OUT = RCA. ACCESSORY Send/Receive = a patch point for additional signal processing like different external EQ unit, Echo,Reverb, Noise reduction etc. (4) Access with jumpers included. · (4)AUX OUT = Additional line output in paralell with the main line output. · LINE OUT = (4)Program buss out. · (4)CUE OUT = A foldback after the the mic preamp stage unaffected by the input fader. · Power Requirements: 117V A.C, 60hz, 5W · Weight: 13.2 lbs (mixer with no meterbridge attached) · Size: 13-1/2 deep. 13-3/8 Wide. 4 Tall. * MB-20 Meterbridge * This bridge is very simple to use and works great with the 2A mixer. It has 4 VU-meters calibrated to trigger at 10 VU. Built in headphone amplifier + volume control. 1/4 inch headphone jack located on the back. · Monitor Select: Controls the 4x2 monitor mixer and buss/tape monitor selections. · The color coded BUSS/TAPE selectors for each channel (1-4)let you determine the signal to be fed into the monitor mixer. You can hear the signal from either the tape-recorder -DOWN- or the outputs of the A-2 in -UP- position. · Backpanel has (4) Input and (4) Output RCA. · (2) Input sensitive selectors. · (4) Foldback RCA · Ground connection. · (4) Tape Input RCA. · L + R Monitor out, RCA. · Switched power inlet 117VAC. 60hz, Max 300W. For connecting the 2-A mixer or other external accessories.
Please contact Peter or Loretta by phone: 514-624-7245. This is a land-line. Email Peter or Loretta at : artangel@videotron.ca
Visites: 
Liens commerciaux:

Mes favoris ()

Récemment ajouté: