|Address||Portugal Cove-St. Philip's, NL A1M1G2
|For Sale By||Owner|
A great starter boat! - Currently on land in St. Philips-Portugal Cove.
Boat: 26 ft. Bermudan rigged sailing yacht built by Tanzer Industries Ltd. Ontario, Canada.
Dimensions: LOA:26’ 4”, LWL: 22’ 6”, Beam: 8' 8", Draft: 3’10”
Displacement: 4350 lbs.
Year built and
Hull material: Fibreglass.
Deck: Fibreglass. Balsa cored.
Auxiliary power: Twin cylinder Volvo Penta 2002 marine diesel, shaft drive.
Boat hull ID number: ZTI 26246M78D (#246)
Official number: 2M-11208
Mainsail, Dacron, 2 reefs, full batten. Mfg: North Sails Ltd, 1994.
Genoa, Dacron 1994.
Genoa, #1 Dacron.
Genoa, #2 Dacron.
Working jib, Dacron.
Storm Jib, heavy Dacron.
Spinnaker, 0.75 oz.
Mainsail cover and storage bags for all sails
Aluminium deck-stepped mast with single spreaders (New mast in 2002).
Main boom of aluminium with SS gooseneck pin and fittings.
Two SS halyard winches Andersen 10 (1-speed), installed 2013.
Two double halyard clutches, Lewmar D1, installed 2013
Two primary winches Barlow #16, chromed bronze.
Two secondary self-tailing winches, Gibb #7STA, black finish alloy.
Two new Harken fiddle blocks in main sheet (replaced in 2010)
Reserve main sheet for emergencies.
Stainless steel 1 x 19 standing rigging with swaged SS terminals. Halyards of SS wire with Dacron rope tails.
Spinnaker pole and fittings.
Complete set of sheets and blocks to operate the vessel.
Dock lines for mooring.
In-board Volvo Penta 2002 twin-cylinder 18 hp marine diesel in excellent working condition. (1986 model, installed new in 1989 in fishing boat and used there until 1993, laid up for 4 years and installed in Gemini in 1997. In 2007, it was removed and was professionally rebuilt/reconditioned). Salt-water cooled.
Serviced annually since 2007. No more than 150 total working hours over the last nine years.
New plastic diesel tank (~10 gallon) professionally installed and properly secured by metal straps in 2007. Tank has shutoff valve and vent pipe installed. Fuel lines are of reinforced rubber (SAE.J1527).
Strong wooden engine beds installed and laminated in place.
Shaft: SS 1 ¼” diameter.
Propeller: Fixed- blade, 17”D x 12”P-LH rotation.
GPS/Chart plotter, Standard Horizon, CP190i, Installed 2014
VHF radio transceiver, Uniden, Model Oceanus DSC; Ser: 910Z64004422, Installed 2010
Depth sounder/fish finder, Garmin, 400C, Ser: 12C027151. Installed 2012
Steering compass, Danforth, bulkhead mount. Installed 2009
Charts for eastern Newfoundland waters.
All navigation lights in good working order.
New Xantrex Freedom HF Inverter/Charger (1000 watt) and 120V breaker panel installed in 2014.
2 new batteries purchased in 2016.
1 x Battery selector switch (new).
1 120 V outlet in cabin.
New 12V DC breaker panel installed in 2015.
50’ shore-power cable.
Cabin lighting by incandescent lamps.
One lifebuoy, horseshoe type, with 50ft floating line.
One lifebuoy, ring type 24”, with 50ft floating line
Four life jackets (PFDs)
Fire extinguisher 1A-5BC unit
First Aid kit
One portable boarding ladder
One rope ladder
One compressed air foghorn
Four wooden plugs of different sizes
Custom steel / wood boat storage cradle in excellent condition.
One marine toilet, installed in 2010, with inlet and discharge lines to sea cocks.
One main anchor (Danforth)
One auxiliary anchor (Danforth)
Galvanized anchor chain 5/16”, 20 ft
Anchor rode (new, 2015) 5/6”, 200 ft
17” rail- mount flagpole (Seadog)
Set of four inflatable boat fenders.
1 Mobri radar reflector
Gimballed brass kerosene cabin lamp.
Outboard engine bracket.
Two boat hooks.
Two-burner SS marine alcohol-cooker (Almatic).