|Date de l'affichage||08-janv.-17|
|Adresse||Beaconsfield, QC H9W5J9
Afficher la carte
DENON AVC-2000 PRECISION AUDIO COMPONENT / INTEGRATED AV SURROUND AMPLIFIER
I am selling my Denon AVC-2000. I bought the unit in the 90's and I always took good care of it.
(Je vends mon amplificateur Denon AVC-2000. J'ai acheté cet unité neuf dans les années 90 et j'ai toujours porter une grande attention à cet amplificateur. Il est en excellente condition)
Here's a review from HiFi Classic:
(Voici une évaluation par HiFi Classic - désolé seulement en anglais)
The Denon AVC-2000, an exceptionally versatile integrated amplifier, was designed for use in a variety of audio and audio/video systems. It provides Dolby Pro Logic surround-sound decoding for video sources plus stereo-enhancement modes that simulate the acoustics of a concert hall or a stadium.
The AVC-2000 accepts a full complement of audio inputs, including a moving-magnet (mm) phono cartridge, a CD player, a tuner, and four additional high-level sources such as the audio signal from a tv set or videodisc player. Front-panel jacks accept the video and audio signals from a second videodisc player, and there are rear audio input and output terminals for three VCR's and three audio tape decks. In an A/V system, the AVC-2000 can also control the video signals to and from up to three VCR's, sending the selected signal to an external video monitor. For suitably equipped video systems, the amplifier can also channel S-video signals from two of the VCR's to the monitor.
The main front-channel outputs of the AVC-2000 are rated at 75 watts per channel into 8 ohms from 20 to 20,000 Hz with no more than 0.08 percent total harmonic distortion (THD). The rear channels deliver up to 20 watts each into 8 ohms at 1,000 Hz with 2 percent distortion. There is also a mono center-channel amplifier rated at 20 watts from 20 to 20,000 Hz with 0.4 percent THD. The AVC-2000 has line-level outputs for the front, center, and rear channels for driving additional or more powerful amplifiers.
The extensive input and output capabilities of the AVC-2000 are complemented by its switching flexibility, which provides completely independent selection of audio and video program sources for recording or monitoring. Program switching is done with front-panel pushbuttons, separately grouped for audio and video, that have red status LED's. Other buttons operate the surround-sound circuits, selecting hall or stadium effects, simulated stereo (from a mono source), or slightly different configurations of Dolby Pro Logic operation. A phantom mode can simulate the effect of a center-front speaker when one is not available, and a wide mode provides enhanced quality with a center speaker. There is also a button that sets the rear-channel delay time to 15, 20 (normal), or 30 milliseconds.
The AVC-2000 also has video-enhancement circuits: sharpness and DETAIL buttons each provide three degrees of improved picture quality from the video outputs of a VCR during viewing or recording on another machine. A small display window on the front panel shows the status of the audio and video record selectors, the Dolby Pro Logic and surround-sound modes, and the selected delay time for the rear-channel signal.
The large remote control contains sixty-four buttons of identical size. Fortunately, they are grouped by function and clearly marked to correspond with the amplifier's front-panel markings. Virtually every front-panel control is duplicated on the remote unit, which also has a few exclusive functions, such as test tones for balancing the Dolby Pro Logic system, audio muting, and controls to display the unit's operating status on a video monitor.
The Denon AVC-2000 is a large and heavy component, partly because of the considerable circuitry it contains and partly because a large front panel and rear apron are needed to accommodate its many controls and connectors. It measures 17-1/4 inches wide, 15-3/4 inches deep, and 6-1/4 inches high, and it weighs about 33 pounds.
Retail price = Over $1,000
Power Amplifier output:
front : 145 W x 2 (6 ohm EIAJ) • 75 W x 2 (8 ohms 20 - 20 kHz with 0.08% T.H.D.)
Center : 50 W x 2 (6 ohm EIAJ) • 25 W x 2 (8 ohms 20 - 20 kHz with 0.04% T.H.D.)
Rear : 40 W x 2 (6 ohm EIAJ) • 25 W x 2 (8 ohms 20 - 20 kHz with 0.04% T.H.D.)
Frequency response: 20Hz ~20kHz +/- 1dB
RIAA deviation: 20Hz ~20kHz +/- 1dB
S/N ratio: 76dB (with 5mV input)
Tone Control range: BASS 100Hz =/- 10dB • TREBLE 10kHz =/- 10dB
Video Frequency response: 5Hz ~6MHz + o, -3dB
Power supply: AC 120V, 60 Hz
Power consumption : 4.5A
Dimension: 17-3/32" X 6-19/64" X 15-3/4 / 434mm (W) X 160mm (H) X 400mm (D)
Weight: 33 lbs 2 oz / 15 kg
André 514 814 4422