Boat Parts, Trailers & Accessories in Barrie
Results 1 - 40 of 265
$100.00
BOAT FENDER HOLDERS
Barrie
SELLING TWO USED 8" FENDER HOLDERS $100 EACH HOLDER HOLDS TWO FENDERS EACH CALL 647-233-5911
$20.00
Trailer Hitch Ball Mount
Barrie
1 1/4 inch ball mount with 1 7/8 inch ball (no nut) and pin but has pin
$65.00
Mercury boat motor shift / throttle controls console mount
Barrie
Shift / throttle controls from a mercury boat motor. Work good.
$55.00
Boat motor shift / throttle controls
Barrie
Shift / throttle controls from a mercury boat motor. These mount behind the gunwale or on a console.
$55.00
Mercury boat motor controls
Barrie
Mercury boat motor controls with trim / tilt switch. The switch is untested. The shift / throttle cables work good. It’s missing the plate on the handle but they still work.
$45.00
Console mount boat motor controls
Barrie
They work alright. Probably need to be cleaned up for them to work smoothly. Shift / throttle controls for a mercury boat motor.
$5.00
Boat / car stereo antennas
Barrie
$4 for each black one and $8 for the silver. The silver one extends.
Please Contact
Boat top frame
Barrie
Sunshade frames from a boat. I probably have the ends for the one in the second pic but I’ll have to find them. Bimimi top frame. One is a two section and the other is a three section. $35/each
$65.00
Boat stern rail / ladder
Barrie
Boat stern rail with built in swim ladder. See pics for details.
$55.00
Mercury throttle / shift controls
Barrie
These mount to a side board so only the handle is showing when mounted. They work well but the round face plate on tbe handle is missing, the controls still work well without it. They are from a ...
$65.00
Mercury motor shift / throttle controls
Barrie
These are side mount so only the handle shows when mounted. The plastic middle button to activate the cold start throttle is broken off. The switch still works but it’s awkward to use. I can get ...
$85.00
Console / deck mount shift / throttle controls
Barrie
Top mount controls. They are for a mercury or mercruiser. See pics for details.
$65.00
Side mount mercury throttle / shift controls
Barrie
They work well. The middle plate is missing off the handle but they still work like they should. They mount on a side board so only the handle is visable when mounted. They came from a mercruiser but ...
$10.00
Vintage Johnson / evinrude control box
Barrie
Just for parts. See pics for details. Dual handle but one is missing.
$20.00
Dual lever Johnson / evinrude controller parts
Barrie
See pics for details. Vintage Dual lever control box parts.
$20.00
Johnson / evinrude throttle control
Barrie
This was on a seaflea and set up to only operate the throttle of a 9.9hp Johnson. I don’t have the parts to connect the cable to the motor. I switched the cable to the shift position and it works so ...
$65.00
Johnson / evinrude vintage dual lever controls
Barrie
The controls work well but the ends that attach to the cables are broke. See pics for details. I think replacement end can be purchased.
$65.00
Boat steering system
Barrie
The center cap from the steering wheel is missing but it still works well.
$65.00
OMC shift / throttle controls
Barrie
See pics for details. The shift cable is a little shorter than the throttle cable.
$100.00
Telefex style boat steering system
Barrie
Works great. One of the tabs that hold the centre cap in the steering wheel is broken as seen in the last pic but a bit of glue will hold it just fine.
