"milling" in Other Business & Industrial in Sherbrooke

Results 1 - 40 of 64


Filters


Category

Other Business & Industrial


Price






Results 1 - 40 of 64

    • Milling Horizontal SAJO UF-54

      Please Contact

      Milling Horizontal SAJO UF-54

      Sawyerville

      Fraiseuse horizontale Sajo UF-54. RPM 39-1500. Avance motorisée dans tous les axes. Livré avec tonnelle et support. Livré avec une tête 2 axes pour usiner verticalement. MSG moi pour plus de photos ...

    • Milling Horizontal Sajo UF-54

      Please Contact

      Milling Horizontal Sajo UF-54

      Sawyerville

      Fraiseuse horizontale Sajo UF-54. RPM 39-1500. Avance motorisée dans tous les axes. Livré avec tonnelle et support. MSG moi pour plus de photos Sajo UF-54 horizontal milling machine. RPM 39-1500. ...

    • Milling Jafo Jarocin FWD 32J

      Please Contact

      Milling Jafo Jarocin FWD 32J

      Sawyerville

      Jafo Jarocin FWD 32J Fraisage vertical et horizontal. Machine lourde, la tête verticale est rotative. Affichage numérique, alimentation pour tous les axes. MSG-moi pour plus de photos. Jafo Jarocin ...

    • 2011 Linde H45T Forklift

      $22,950.00

      2011 Linde H45T Forklift

      Canada

      Shipping by seller

      2011 Linde H45T 8500LB Lift 188" overall lift 96" Collapsed height Side shift Dual Tanks New rear tires Exceptionally well maintained machine, VERY capable. Linde Cat Doosan Warehouse Lift truck lumber yard lumber mill

      Shipping by seller
    • 125 KVA - Cummins 5.9L - Diesel Generator - 120/240 - 208 Volt

      $24,950.00

      125 KVA - Cummins 5.9L - Diesel Generator - 120/240 - 208 Volt

      Canada

      Shipping by seller

      Cummins 5.9L - Diesel Generator - 125KVA 120/240 - 208 Volt 208 Volt 3 phase 120-240 Volt Single phase 7 foot narrow shack with sliding side doors. 3000 Litre fuel tank mounted on skid. Incredibly solid machine, with a great motor. Has never given us ANY issues. The machine can also be converted for 480 or 600

      Shipping by seller
    • TAKISAWA EX310 TURNING CENTER WITH LIVE MILLING

      $0.01

      TAKISAWA EX310 TURNING CENTER WITH LIVE MILLING

      Canada

      Shipping by seller

      Machine: TAKISAWA EX310 TURNING CENTER WITH LIVE MILLING Manufacturer: TAKISAWA Model: EX-310 Year:2006 Controller: FANUC SERIES 21i-TB Max swing (mm). 670 Max turning diameter (mm). 350 Max turning length (mm). 710 Bar capacity (mm). 75 Spindle Hole diameter (mm). 86 Spindle speed (RPM) 3500 Spindle nose ASA

      Shipping by seller
    • Hecker 400/MCGE

      $29,900.00

      Hecker 400/MCGE

      Canada

      x-travel 1320 mm y-travel 345 mm z-travel 400 mm table clamping area 1800 x 450 mm max. workpiece weight 1500 kg table swiveling to both sides 45 ° tool taper 50 SK Diameter on front bearing 110 mm blade cutter head diameter 315 mm max. torque milling spindle 1850 Nm speed steps 18 spindle turning speed range

    • DAEWOO PUMA 240 MSB WITH SUB SPINDLE AND MILLING

      Please Contact

      DAEWOO PUMA 240 MSB WITH SUB SPINDLE AND MILLING

      Canada

      Description Equipped with: Controller : FANUC 18i-TB FANUC 18iT CNC CONTROL - TOOLSETTER - ATS COLLET CLOSER ON SUBSPINDLE PARTS CATCHER, PARTS CONVEYOR Chip conveyor Tool Eye Specifications Manufacturer Daewoo Model PUMA 240 MSB Year 2003 Condition Used Serial Number 24MS0284 Stock Number TC-DWO-819 Max Diameter

    • Yuwe TM250 (1 Phase) Manual Milling Machine | 40 Taper & R8

      $13,990.00

      Yuwe TM250 (1 Phase) Manual Milling Machine | 40 Taper & R8

      Canada

      Specifications Included Option: X-Axis Power Feed: AC 110V, 90W, 50/60Hz Included Option: Y-Axis Power Feed: AC 110V, 90W, 50/60Hz Working Table: 9" x 42" Working Table Load: 775 lbs Travel X-Axis: 35.5" Travel Y-Axis: 15.8" Travel Z-Axis: 15.8" T-Slot: 0.12" x 0.63" Quill Travel: 5" Quill Ø: 3.45" Quill Feeds

    • Groen 100 Gallon Steam Kettle / Marmite a Vapeur 100 Gallons ***PERFECT***

      $24,000.00

      Groen 100 Gallon Steam Kettle / Marmite a Vapeur 100 Gallons ***PERFECT***

      Canada

      3 Available / 3 Disponible 2020 Groen 100 gallon Gas stationary steam kettle. Model AH/1E-100. A quick google search will show you this unit costs over $32,0000USD when new. Save thousands here. This unit was just pulled from a relocating school cafeteria and is very clean, barely used and in perfect working order.

    • LINCOLN Impinger 18 GAS conveyor Pizza Oven, Four a Pizza rotatif Convoyeur model 1116

      $9,000.00

      LINCOLN Impinger 18 GAS conveyor Pizza Oven, Four a Pizza rotatif Convoyeur model 1116

      Canada

      Shipping by seller

      Feel free to bring your non-cooked pizza and come and try it and see it working with your own eyes. These lincoln model 1116 gas pizza conveyor ovens have an 18" wide belt. Very clean and working perfectly. Save thousands! A new identical model costs over $18,000.00 + tax. Mobile stainless steel stand included.

      Shipping by seller
    • SMTCL TPX6111C3 Boring Mill

      $89,900.00

      SMTCL TPX6111C3 Boring Mill

      Canada

      Specifications Brand: SMTCL Model: TPX611C/3 Capacity: 4.3" Rotary table size: 42" X 43" Table load Capacity: 6,613 LBSFacing Plate Diameter: 24.8" Spindle Diameter: 110mm Spindle Taper Iso: 50 Spindle Speed: 8 - 1100 RPM Rapids Travel ( X/ Y/ Z/ W): 98.4" Facing Head Speed: 4-200 RPM X Axis Travel: 62.9" Y Axis

    • Long Chang LC-20VHS Manual Mill

      $12,900.00

      Long Chang LC-20VHS Manual Mill

      Canada

      Specifications Model: LC-20 VHS Long Travel: 36.2" Cross Travel: 16.3" Vertical Travel: 17.1" Table: 56" x 10" Max Load: 200kg T-slot: 3" x 0.625" x 2.5" Motor: 4HP Power Feed: Spindle Taper: MT4 Spindle Speed: 60 - 4500 RPM Spindle Nose to Table: 4.5" - 21.7" Spindle Nose to Column: 14" - 32.5" Overarm Travel:

    • Tos W100 Boring Mill (50 Taper) | Stan Canada

      $99,000.00

      Tos W100 Boring Mill (50 Taper) | Stan Canada

      Canada

      Features Precision positioning of rotary table, (4 x 90°) by optical projection-type reading equipment Power operated tool clamping (MUN) Cross and Longitudinal slide surface covered with plastic Guideways of bed and slide are lined with hardened steel strip inserts Speeds of faceplate and spindle may be either

    • Stanko 6R83SH Manual Mill | Stan Canada

      $6,500.00

      Stanko 6R83SH Manual Mill | Stan Canada

      Canada

      Specifications Overarm swivel spindle nose to table: 160 – 580mm Horizontal spindle axis to table range: 30 – 450mm Overarm spindle axis to 1 vertical column ways range horizontal spindle axis to bottom of overarm: 190mm Working surface: 1600 x 400mm Max. workpiece weight: 630kg Travel Longitudinal: 1000mm Travel

    • Pallmann PZ 14 Flaking Mill

      $15,000.00

      Pallmann PZ 14 Flaking Mill

      Canada

      Shipping by seller

      Description: Pallmann PZ 14 Flaking Mill MFG: Pallmann Model #: PZ 14 S/N: 6672121 Year: 1972 Prallteller: 425 Schleuderrad: 780 Note: Electric motor available Condition: Used in good working order Location: Winnipeg, Manitoba See our other ads on Kijiji

      Shipping by seller
    • BRAND NEW Commercial Handheld Utensils For Kitchen/Restaurants/Buffets - ON SALE (Open Ad For More Details)

      $169.99

      BRAND NEW Commercial Handheld Utensils For Kitchen/Restaurants/Buffets - ON SALE (Open Ad For More Details)

      Canada

      Shipping by seller

      ***TRUCKLOAD SALE***---BRAND NEW COMMERCIAL HANDHELD UTENSILS FOR KITCHEN/RESTAURANTS/BUFFETS FOR RESTAURANT, BUFFET, BAKERY, BARS, AND PUBS, FOOD PROCESSING, AND KITCHEN---BEST PRICES---AMAZING QUALITY---GREAT SELECTION WE SHIP ANYWHERE IN CANADA OR PICK-UP AND SAVE!!! Omni Food Equipment - 500 Norfinch Drive

      Shipping by seller
    • Used  Westinghouse 300 HP, 2300/4160 Volt, 3570 RPM Electric Motor

      $15,000.00

      Used  Westinghouse 300 HP, 2300/4160 Volt, 3570 RPM Electric Motor

      Canada

      Shipping by seller

      Used Westinghouse 300 HP, 2300/4160 Volt, 3570 RPM Electric Motor MFG: Westinghouse Model #: AEHA TK003 Size: 300 HP Volts: 2300/4160 RPM: 3570 Frame: 5009A Hz: 60 Phase: 3 Condition: Used, removed from working mill Location: La Broquerie, MB See our other ads on Kijiji

      Shipping by seller
    • Milling machine, horizontal Sajo UF52

      $2,750.00

      Milling machine, horizontal Sajo UF52

      Canada

      Shipping by seller

      Brand: Sajo Model: UF-52 STR Serial #: 752811 Approx. Shipping Weight: 3,500 Lbs. Approx. Shipping Dimensions: 75 L x 80 W x 75 H Skidding Fee: $175 Specifications: Table Size: 49 x 11-1/2 Travels (X, Y, Z): 33 x 8 x 18 Table Feeds: 12 Spindle Speeds (12): 40 – 1800 RPM Electrical: 550 V/3PH Equipped With: Motorized

      Shipping by seller
    • Milling machine 50 taper 1” x 6” x 1” slot, 6” dia. Cutter holder

      $175.00

      Milling machine 50 taper 1” x 6” x 1” slot, 6” dia. Cutter holder

      Canada

      Shipping by seller

      Milling machine 50 taper 1” x 6” x 1” slot, 6” dia. Heavy duty Cutter holder, 5 locking screws, 7-1/4" deep to taper, overall dimensions 6" dia x 12-1/2" long. Located Colborne Ontario.

      Shipping by seller
    • Milling machine vertical head. Cincinnati.

      $1,250.00

      Milling machine vertical head. Cincinnati.

      Canada

      Shipping by seller

      Milling machine vertical swivel head. Cincinnati. 50 taper, 12" dia plate, (4) 3/4" dia. Mount holes3/8" locate pin, 1-1/2" dia spline shaft x 16" long, OA dimensions 20" high x 24" F-B x 17" , 1-1/2" hole through spindle, located Colborne, Ontario. East of Toronto.

      Shipping by seller
    • Milling machine Horizontal Arbors, NEW, #50 taper, 1-1/2” dia x 24”

      $465.00

      Milling machine Horizontal Arbors, NEW, #50 taper, 1-1/2” dia x 24”

      Canada

      Shipping by seller

      Milling machine Horizontal Arbors, NEW, #50 taper, 1-1/2” dia x 24”, Spacers 14 - (2) 1/4”, (3) 1/2”, (3) 1”, (3) 1-1/2”, (3) 2” c/w locknut, 32” OA length. $465.00 #50 taper, 1-3/4” dia x 24”, Spacers (1) 1/4”, (1) 3/8”, (1) 1/2”, (2) 3/4”, (3) 1”, (2) 2”, (2) 3”, (2) 4”, c/w locknut, 32” OA length. $495.00

      Shipping by seller
    • 50 taper milling tool holders, 65 available

      $65.00

      50 taper milling tool holders, 65 available

      Canada

      Shipping by seller

      50 taper milling tool holders, 65 available. Located Colborne, Ontario starting T $65.00 each

      Shipping by seller
    • Dividing head 8” diameter capacity milling machine

      $596.95

      Dividing head 8” diameter capacity milling machine

      Canada

      Shipping by seller

      8" dia capacity Zeatz dividing head, indexible, good condition. Located Colborne Ontario

      Shipping by seller
    • Milling machine #50 taper horizontal arbors

      $295.00

      Milling machine #50 taper horizontal arbors

      Canada

      Shipping by seller

      Milling machine # 50 taper Horizontal arbors 2nd picture can’t get the nut off but the threaded end is 1-3/8” dia which is usually the arbor dia. I put some penetrating oil on it and will try again tomorrow. It is 50 taper.. 32-3/4” long arbor to taper hub, 3” dia spacers, 4” dia cutter..$425.00 1st pic 50 taper,

      Shipping by seller
    • Microbore lathe/milling boring cutter, 2-3/8” bore

      $139.99

      Microbore lathe/milling boring cutter, 2-3/8” bore

      Canada

      Shipping by seller

      Microbore lathe/milling boring cutter, 2-3/8” dia bore x 7-1/2” depth, replaceable cutting edge, mounting shank 1-1/2” dia x 3-3/4”. Overall length 11”

      Shipping by seller
    • Milling machine CAT 40 Techleader tool holder

      $125.00

      Milling machine CAT 40 Techleader tool holder

      Canada

      Shipping by seller

      Milling machine CAT 40 Techleader tool holder. located Colborne, Ontario.

      Shipping by seller
    • Milling machine tilt table, 10” x 12”, t slots 1/2”, height 7-1/2”

      $395.00

      Milling machine tilt table, 10” x 12”, t slots 1/2”, height 7-1/2”

      Canada

      Shipping by seller

      Milling machine tilt table, 10” x 12”, t slots 1/2”, height 7-1/2”

      Shipping by seller
    • Milling horiz. stub arbor, 50 taper,  0.125 in thick cutter

      $119.00

      Milling horiz. stub arbor, 50 taper, 0.125 in thick cutter

      Canada

      Shipping by seller

      Milling horiz. stub arbor, 50 taper, 0.125 in thick cutter

      Shipping by seller
    • end Mill holder, BT 50 taper mount  Lyndex no. 4 MT hole

      $119.00

      end Mill holder, BT 50 taper mount Lyndex no. 4 MT hole

      Canada

      end Mill holder, BT 50 taper mount Lyndex no. 4 MT hole

    • Bandsaw Guides Sawmill guides pair new build your own mill!

      Please Contact

      Bandsaw Guides Sawmill guides pair new build your own mill!

      Canada

      Pair of bandsawmill guides great for diy sawmill! these fit the standard 1-1/4" wide bands we ship worldwide visa/mc accepted 250 564 3334 days 9am-5pm PG Saw Prince George

    • FRAISEUSE LAGUN FTV-5 MILLING

      Please Contact

      FRAISEUSE LAGUN FTV-5 MILLING

      Canada

      ***LOCATED IN QUEBEC CITY – CLICK ON VIEW MAP*** SOUDOGAZ.COM / FOR FURTHER INFORMATIONS PLEASE VISIT OUR WEBSITE !! No de produit :US8096 Marque :LAGUN Modèle :FTV-5 Course :X: 31,5"", Y:13½", Z:15,75" COURSE DU FOUREAU:6" Vitesse :LOW:60-500, HIGH: 500-4000 Voltage :600V 3PH Attachement :NT#40 Dimensions :72"X

    • FRAISEUSE LAGUN FTV-5 MILLING

      Please Contact

      FRAISEUSE LAGUN FTV-5 MILLING

      Canada

      ***LOCATED IN QUEBEC CITY – CLICK ON VIEW MAP*** SOUDOGAZ.COM / FOR FURTHER INFORMATIONS PLEASE VISIT OUR WEBSITE !! No de produit :US8097 Marque :LAGUN Modèle :FTV-5 Course :X: 31,5"", Y:13½", Z:15,75" COURSE DU FOUREAU:6" Vitesse :VARIABLE: 0~4200 RPM Voltage :600V 3PH Attachement :NT#40 Dimensions :72"X 78"X

    • FRAISEUSE ACRA CK 1½HK MILLING

      Please Contact

      FRAISEUSE ACRA CK 1½HK MILLING

      Canada

      ***LOCATED IN QUEBEC CITY – CLICK ON VIEW MAP*** SOUDOGAZ.COM / FOR FURTHER INFORMATIONS PLEASE VISIT OUR WEBSITE !! No de produit :USM Marque :ACRA Modèle :CK 1½HK Type :VERTICALE Course :X: 33"", Y:16", Z:15" COURSE DE LA BROCHE: 5" Vitesse :BROCHE: 50~465 RPM , 415~4000 RPM Voltage :3 HP/ 220 V / 1 PHASE A

    • FRAISEUSE SAJO UF-54 MILLING

      Please Contact

      FRAISEUSE SAJO UF-54 MILLING

      Canada

      No de produit :US8060 Marque :SAJO Modèle :UF-54 Course :X: 26"", Y:12", Z:10" Vitesse :(16) 39~1500 RPM Voltage :550V / 3PH Attachement :NT#40 No de série :671268 ECRAN DIGITALE ANILAM WIZARD 3 AXES DIMENSIONS DE LA TABLE: 11 X 48

    • FRAISEUSE MODERN NO.2 LU UNIVERSAL MILLING

      Please Contact

      FRAISEUSE MODERN NO.2 LU UNIVERSAL MILLING

      Canada

      ***LOCATED IN QUEBEC CITY – CLICK ON VIEW MAP*** SOUDOGAZ.COM / FOR FURTHER INFORMATIONS PLEASE VISIT OUR WEBSITE !! No de produit :US8043 Marque :MODERN Modèle :NO.2 LU UNIVERSAL Course :X: 35", Y:13", Z: 19" Vitesse :(12), 30~4000 RPM Voltage :575V / 3PH Attachement :NT#40 Poids :4000 LB DIMENSIONS DE LA TABLE:

    • CENTRE D’USINAGE VERTICAL CNC BRIGHT APEX 504 MACHINING CENTER

      Please Contact

      CENTRE D’USINAGE VERTICAL CNC BRIGHT APEX 504 MACHINING CENTER

      Canada

      ***LOCATED IN QUEBEC CITY – CLICK ON VIEW MAP*** SOUDOGAZ.COM / FOR FURTHER INFORMATIONS PLEASE VISIT OUR WEBSITE !! No de produit :US8054 Marque :MITUTOYO Modèle :BRIGHT APEX 504 / 3982m3112 Course :DÉPLACEMENT: X:19,6" , Y: 15,9", Z: 15,9" Voltage :600v / 3ph Attachement :NT#40 Dimensions :42"x 42"x 86" Poids

    • FRAISEUSE LAGUN FTV-4 MILLING

      Please Contact

      FRAISEUSE LAGUN FTV-4 MILLING

      Canada

      ***LOCATED IN QUEBEC CITY – CLICK ON VIEW MAP*** SOUDOGAZ.COM / FOR FURTHER INFORMATIONS PLEASE VISIT OUR WEBSITE !! No de produit :US8011 Marque :LAGUN Modèle :FTV-4 Course :X: 32"", Y:13½", Z:19" COURSE DU FOUREAU:5" Vitesse :VARIABLE: 58~4200 Voltage :575V / 3PH Attachement :NT#40 Dimensions :78"X 74"X 92"

    • FRAISEUSE TOS FGV 32 MILLING

      Please Contact

      FRAISEUSE TOS FGV 32 MILLING

      Canada

      ***LOCATED IN QUEBEC CITY – CLICK ON VIEW MAP*** SOUDOGAZ.COM / FOR FURTHER INFORMATIONS PLEASE VISIT OUR WEBSITE !! Modèle : FGV 32 No produit:US8039 Course : X: 40¼", Y:12½, Z: 17" Longueur Travail :TABLE: 14¼" X 55" Vitesse : X-Y : 20-900 (VAR) mm /min/ Z : 5.7-250 (VAR) mm/min VITESSE RAPIDE: X-Y: 1635 mm/min

    • FRAISEUSE JAFO FWF32JU MILLING

      Please Contact

      FRAISEUSE JAFO FWF32JU MILLING

      Canada

      ***LOCATED IN QUEBEC CITY – CLICK ON VIEW MAP*** SOUDOGAZ.COM / FOR FURTHER INFORMATIONS PLEASE VISIT OUR WEBSITE !! No de produit :US8041 Marque : JAFO Modèle : FWF32JU Course : X: 33½"", Y:9¼", Z:16½" Longueur Travail :TABLE: 12½" X 49¼"" Voltage : 550V / 3PH Dimensions : 78¾" X 58"X 82" No de série : 241 LIQUIDE