Results in Other Business & Industrial in Cape Breton
Showing 1 - 40 of 97 results
Please Contact
Glace Bay
21/03/2023
Looking to by a walk-in freezer in good condition. Size no bigger than an 8'X 8'

$2,000.00
Cape Breton
10/03/2023
Graphtech 6000c series Vinyl Cutter If interested, please text number listed, as I do not have access to calling, thank you

$1,800.00
Cape Breton
10/03/2023
If interested, please text number listed as I do not have access to calling, thank you.

$2,200.00
Cape Breton
10/03/2023
If interested, please text number listed as I do not have access to calling, thank you

$5,000.00
Cape Breton
10/03/2023
If interested, please text number listed as I do not have access to calling, thank you

Please Contact
We have a large inventory of used industrial shelving. Metalware brand is one the leading most recognized names in the Canadian market and storage solutions industry since the 1960's. We have 1000's of units available in the following sizes (as seen in pictures). 7'4 tall x 12" deep x 36" wide 7'4 tall x 24" deep
Featured

$9,000.00
Cape Breton
10/03/2023
8 Station 8 headed printing press Assembled base/shaft/print arm carrier Provides great efficiency possible in actual printing If interested please text number listed, as I do not have access to ...

$1,400.00
Arichat
05/03/2023
Shake and sift large quantities of flower, herbs. grains. etc. . Requires 3 phase power to operate! 1400.00 OBO-

Please Contact
Sydney
04/03/2023
Offering vending machine to a business. Will stock every two weeks or as needed. Please contact

$39,000.00
Marion Bridge
02/03/2023
39 Cages of DuraForms the leader in residential and commercial concrete systems. 11/8”concrete latch forms are the highest quality materials on the market. Dependability and durability ensures ...

$2,600.00
Donkin
25/02/2023
Framing business for sale stored in garage everything to start working today! 2700 obo please call or text 902-574-4790

$7,880.00
Inverness
22/02/2023
THANK YOU TO THE BUYERS AND THERE MAY BE OTHER UNITS AVAILABLE CLOSER TO THE SPRING BUT PRICES WILL BE HIGHER TO REFLECT THE HIGHER DEMAND! THE PRICE INCLUDES TAXES, AND DELIVERY DROP OFF (Under ...

$11,500.00
CHEAP, CHEAP, CHEAP! RIDICULOUSLY CHEAP! Models: Tennant T500 and T600... Price: $11,500 each - refurbished like-new, with warranty! Why this model: The Tennant T500/T600 Walk-Behind Floor Scrubbers, deliver high performance results on any hard floor surface. Manufactured by the leader in the industry, The Tennant

Please Contact
Glace Bay
29/01/2023
44inch long 25inch wide lobster traps acquire for price

Please Contact
Make: Matsuura Model Number: MC_800VF Year: 1995 Controller: Fanuc Series 15-M CNC controller SPECIFICATIONS Number of Axis-- 5 X Axis Travel----- 31.5 IN Y Axis Travel----- 17.3 IN Z Axis Travel----- 19.09 IN Spindle Speed---- 8000 RPM Spindle Taper----- BT50 ATC----------------- 32 Dimensions------ 104 IN x

$1,200.00
MTE Matrix Filter 480v, 128A, 3 PH, MDW0128D Qty: 11 Units available MFG: MTE Size: 128A Cat Number: MDW0128D 480 Volts Phase: 3 Hz: 60 Enclosure Type: 3R Weight: 406 lbs Condition: Used in good working order Location: La Broquerie, MB See our other Kijiji ads!! We ship across Canada!!

$3,900.00
5 KV, 600 Amp GE Breakmaster Load Interrupter enclosed disconnect switch Qty: 3 Available MFG: GE Maximum rated voltage: 5 KV Continuous Amps rating: 600 Enclosure Type Category B: Indoor Date: 2015 Condition: Used in very good condition Price: $3,900 / Each Location: La Broquerie, Manitoba See our other Kijiji

$2,700.00
Allen Bradley 150-C361NBR Motor Controller, New Never Installed. MFG: Allen Bradley Cat No: 150-C361NBR Series: B 3 Phase Only Line Voltage: 200-480 VAC 50/60 HZ Control Voltage: 24VAC/24VDC Line Controller Max Cont. Current 361A Volts: 200/230/480/575 HP: 125/150/300/ N/A Delta Controller Max Cont Current 625A

$2,500.00
Description: Large lot of numbering machine for printing presses. Mostly Atlantic, American Qty: 100 + Location: La Broquerie, MB Condition: Mostly in good working condition, this was the inventory of a large printing facility that shut down in Winnipeg. Price: $2500 for the lot!! See our other Kijiji Ads!!

$13,995.00
2007 Heidelberg PM46/QM46 2 colour press with under 13 million impressions. New ABW roller, all other rollers in good condition. We have installed over 50 of these great little presses. We get good shipping rates.

Please Contact
Make: Matsuura Model Number: MC_600V Controller: YASNAC MX-3 Control Year: 1988 SPECIFICATIONS: Axis 3 X Axis Travel 23.6 IN Y Axis Travel 16.1 IN Z Axis Travel 18.5 IN Spindle Speed 7,500 RPM Spindle Taper CAT 40 Spindle Motor 10 HP Table Size 34.6 IN X 15.7 IN Total Load Capacity 880 LBS Total Changer Capacity

$3,500.00
T.A.P.S Phasor VSD Transformer 130 KVA - 480 Volts Size: 130 kVA Primary Voltage: 480 volts Amps: 156 Secondary Voltage: 752-2977 volts Amps: 100-25 Transformer Type: Oil - ONAN Phase: 3 Weight: 2616 Lbs Condition: Good working condition, megger tested prior to shipping Location: La Broquerie, MB See our other

$2,950.00
2014 DVair refrigerated air dryer 200 CFM High Pressure 240 Volt power Replacement cost is $5500. Excellent machine, we have owned it since new. Can be shipped if needed. Dryer Compressor Screw Compressor Air Dryer Shop air Sand Blasting Screw Compressor Paint shop clear air dry air

$2,300.00
75 HP Variable Frequency Drive - 460v - PDL Qty avaialble: 2 Units MFG: PDL Electronics LTD Model #: UE-90 Input Voltage: 230 VAC/ 380-480 VAC Phase: 3 Amps: 112 Hz: 50-60 Output Voltage: 230 VAC/ 380-480 VAC Pahse: 3 Amps: 90 Hz: 0-400 IP54 Enclosures Condition: Used in good working order, units are powered up

$20,000.00
Description: 4600 Gallon 304 Stainless Steel Vertical Tank, approx 6ft Dia x 22' Long with rounded bottom and top. ~6 ft Dia. 22 ft Long 304 SS 3/16" Thick Capacity: Approx. 4600 Gal Condition: Used in good condition, previously used for storing animal fat. Location: Winnipeg, Mb See our other Kijiji ads!!

Please Contact
Make: Matsuura Model Number: MC_600V Controller: YASNAC MX-3 Control Year: 1988 Specification: Axis----- 3 X Axis Travel----- 23.6 IN Y Axis Travel----- 16.1 IN Z Axis Travel----- 18.5 IN Spindle Speed--- 7500 RPM Spindle Taper----- CAT 40 Spindle Motor---- 10 HP Table Size--------- 34.6 IN x 15.7 IN Total Load

$4,850.00
Boss Bullet 70CFM Air Compressor - screw style Gas powered, with 70CFM air end. entirely self contained. HAs been deck mounted on service truck since new, so as you can see the exterior is fairly rusty. Runs awesome. Replacement cost would be around $18k Can ship if needed. Screw compressor service truck sand

$400.00
With connector cord. Good used condition. 1 available $400.

$250.00
Description: Square D 30 Amp, 600 Volt Heavy Duty Fusible Disconnect with fuses installed and 4 Pole Receptacle Qty: 4 Available MFG: Square D Size: 30 Amps Volts: 600VAC / 250VDC 3 x Fuses included Condition: Used in good working condition Location: La Broquerie, MB Price: $250 each

$6,500.00
REX 220 AMP, 5KV, 3PH Line Reactor, 220C3000E6-3/E3R MFG: REX Robicon Part Number: 164677.00 Size: 220A Cat Number: 220C3000E6-3/E3R Serial Number: U 27888-2 Voltage class: 5KV Phase: 3 BIL: 30 KV Hz: 60 Enclosure Type: 3R Weight: 2900 lbs Condition: Used in good working order Location: La Broquerie, MB See our

$300.00
MTE RL-13003, 3 phase reactor, 130 Amps MFG: MTE Corporation Size: 130 Amps Voltage: 690 V MAX Phase: 3 0.30 mH Ith= 195A Condition: Used in good working order Location: La Broquerie, MB See our other Kijiji ads!! We ship across Canada!!

$2,200.00
Description: Mahaffy LLD36 1000 Lb Hydraulic Dumping Station MFG: Mahaffy Materials Handling Ltd. Qty: 2 Model #: LLD36 Capacity: 1000 lb Serial #: 3063 Volts: 120 Phase: 1 Amps: 13 Condition: Used in good working order. Video of unit running available upon request. Location: La Broquerie, MB See our other Kijiji

$15,000.00
Description: Pallmann PZ 14 Flaking Mill MFG: Pallmann Model #: PZ 14 S/N: 6672121 Year: 1972 Prallteller: 425 Schleuderrad: 780 Note: Electric motor available Condition: Used in good working order Location: Winnipeg, Manitoba See our other ads on Kijiji

$2,695.00
Horizon SPF9 auto bookletmaker. Hand-feed a set of collated sheets in, a stapled/folded booklet comes out. Solid machine with 5,000 capacity staple heads. We get low shipping quotes from Winnipeg

Please Contact
Current model Baumfolder 714XLT in excellent condition. rollers are great. Includes electronic sheet counter, cabinet/stand. Uses the fast Becker air pump. We get low shipping rates from Winnipeg.

Please Contact
Best to come and view. Have Cystic / Steam/ Cleaning Holding Vats Contact - Alberta Mechanical & Salvaged Recycling Ltd. Located in Lethbridge, Alberta Call -403 327-2677 for viewing and pickup directions Info Call - 403 634-3685 Open Monday - Friday 9-5 Cash, Accepted , Etransfer GST Applies

$5,595.00
Late model Rosback 220BV. Max 20 inch wide sheets, with air feed, 2 perf units, one score unit. We get low shipping rates from Winnipeg

$49.00
We have several used ipad or menu stands they are very durable, scratch resistant, and magnetic. This is first come first serve. As long as the ad is up we still have in stock. These are 49$ if you buy individually but bulk pricing is available. call us at 647-729-8929

$17,950.00
Cat 75KVA towable diesel generator. 120/240 Volt Single Phase 208/480/600 Volt 3 Phase Well maintained, load banked, great machine. Machine is ready to work immediately. I can help arrange shipping anywhere In Canada if that’s a concern. Mining camp Construction Backup power Grain fan Grain dryer Aeration fan

Please Contact
male and female mannequin torsos in various colors and finishes used and new, starting as low as $35!! BEST PRICES IN THE GTA!!! IDEAL DISPLAYS INC. STORE FIXTURES AND MANNEQUINS A-124 CARTWRIGHT AVE , TORONTO, M6A 1V2. 416-504-2808 MONDAY TO FRIDAY: 9 AM - 5:30 PM SATURDAY: 10 AM - 4 PM =====================
Post your classified or want ad in Cape Breton Other Business & Industrial.
It's fast and easy.