"table pour 8 personnes" in Tools in Alberta

Results 1 - 40 of 118

Filters

Results 1 - 40 of 118

Sort by

$60.00
Worm drive 8”circular saw
Calgary
Well used saw half life on the brushes and clean oil.
$90.00
electric tile cutter
Calgary
Mastercraft wet tile saw 7", come with 2 baldes and manual book 55-6869-8 great conditions
$2,500.00
New Core Cut CC148-HXL Early-Entry Concrete Saw
West Edmonton
Brand-New (2021) Diamond Products Core Cut CC148-HXL-EE6 Early-Entry Concrete Saw w/ Honda GX160 4.8HP gas engine, 6" max blade size (w/ 1" arbour), 1-year factory warranty We took this saw in from a ...
$80.00
STANLEY FATMAX corded Circular Saw with blade
Calgary
Good excellent condition Work great 15Amp motor 5600 RPM 7 1/4 INCH (185mm) Long 8ft cord Pickup in Panorama Hills NW
$250.00
Hausmann Wet Tile Cutting Saw
Edmonton
Brand new in box. Retails at $350 Wet cutting tile saw. 120 volts, 60hz, 5.8 amps, 3600 rpm. Steel blade of 7" with continious rim for extra clean cuts. Dust-free cuts on any size of wall and floor ...
$150.00
8 1/4 “ Sliding Compound Mitre Saw- New In box
Edmonton
8 1/4 “ Sliding Compound Mitre Saw New in box never used Pick up northside Edmonton
$70.00
Delta 8-1/4 Compound Miter Saw
Calgary
Compact Delta 36-040 8-1/4" Compound Miter Saw 115V 4700 RPM Includes Fine tooth Carbide Blade Used a few times, just sitting around New condition
$50.00
Mastercraft 10” Carbide-tipped, 28 Teeth Circular Saw Blades
Grovenor
Mastercraft 10” Carbide-tipped, 28 Teeth Circular Saw Blades, 5/8” Arbor, New, un-opened/unused. All three for $50.
$15.00
Circular saw blades
Edmonton
I have four circular saw blades for sale. One brand new (marked as a melamine blade), one B&D (doesn't look like it has been used), a used DeWalt 24T, and a fairly used tile(?) blade. All for 5/8 ...
$2,500.00
General 10 inch, 3 hp Table saw.
Calgary
General table saw. 10-inch blade, 3 hp, 220 volt Selling with 9 blades and an 8-inch Dimar dado set, The blades are Diablo, CMT, and Dimar ( 5 combination blades and 4 fine cut blades ) all the ...
$30.00
Milwaukee 3 -Inch Hole Dozer Bi-Metal Hole Saw with 3/8 -Inch Ar
Edmonton
Milwaukee 3 -Inch Hole Dozer Bi-Metal Hole Saw with 3/8 -Inch Arbor & Pilot Bit 3” hole saw used once under the kitchen cabinet. Overview Model # 49-56-9670 Store SKU # 1001179621 The Milwaukee Hole ...
$125.00
Electric Pole Saw - 10" - 8A
Edmonton
Only used once or twice. Clean and comes with manual. No issues whatsoever. With its versatile 2-in-1 design, this Worx electric pole saw converts into a chainsaw to tackle a range of light-duty to ...
$50.00
Rockwell 8 1/2" Circular Saw
Edmonton
Shows wear but still works well. Trying to downsize on tools. $50
$150.00
New: Multiple Mandrels and Hole Saws, 2-5/8 and 3-5/8
Thorsby
Package of Brand New in package hole saw blades and mandrels. -2 EAC 3/8" Drill Mandrels, -1 EAC 2-5/8", -4 Milwaukee Hole Dozer 2-5/8", - 2 Milwaukee Hole Dozer 2-5/8" Retail price over $215. ...
$10.00
6.5" 48t thin kerf aluminum saw blade
Edmonton
165mm or 6.5" thin kerf aluminum circular saw blade. Has 5/8" arbor. 48teeth . Asking 10.00 cash or e-transfer. Pickup in Oliver, thanks.
$125.00
B&D router and accessories
Edmonton
Black and Decker router with Vermont router table including 8 new bits as well as some used bits.
$110.00
Sealedbox Dual height Master craft Power tool stand.That mount m
Calgary
Sealedbox Dual height Master craft Power tool stand. That mount most Mitre saws, table saws, wet tile saws and more. Specification: Height Adjustable: 25 1/2 to 35 3/4" (64.8 to 91 cm). Load ...
$1,000.00
18” open drum sander
Calgary
Great condition drum sander. Open side, adjustable speed feed table. Comes with manual, stand with wheels, sawdust bag and dust collector adapter. 1/8” to 4 1/2” thickness capacity
$30.00
Table saw molding/planer set.
Calgary
Convert your bench table saw to a molder, shaper or jointer. Pretty unique set. Haven't seen that many before. All pieces there. Fits 1/2", 5/8" or 3/4" arbors. USA made. Pickup in Mckenzie Towne
$125.00
8” Rockwell/Beaver Table Saw $125
Northwest Calgary
Older but works fine, very solid. Cast iron top, ¾ hp motor. Includes mitre gauge, rip fence and throat plate for regular and a second one for dado blades.
$10.00
steel / metal blade
Calgary
have some blade for circular saw / chop saw etc steel / metal cut off blade brand Norton, Mastercraft, Makita, Dewalt etc size: 10", 6 1/2", 12", 4 1/2" or 8" etc brand new or used, $10 -- $15 each, ...
$100.00
Aluminum top welding table
Fort McMurray
Home made small welding table,table only !!!!29 wide by 69 long can be cut to size 1/8 aluminum with frame below legs and welder stand!
$345.00
8 1/4" DEWALT DWE7485 TABLE SAW (29839753)
Calgary
Item # 29839753 Please call for current availability Stock updated daily Services Offered : Interest Free Layaway Package Deals Shipping Instant Cash Loans Sharky's Pawn Shop 702 16 Ave NW (403) ...
$10.00
8” 12-tooth carbide tip saw blade
Calgary
Old school Disston Made in Canada Alternate Top Bevel. 12 tooth 8-inch table saw blade.
$20.00
Dado Saw Blade Set
Calgary
Dimar 8” 24 tooth Dado saw blade set w/carrying case. Carbide tipped blades. Barely used
$450.00
Metabo Table Saw with Stand
Calgary
Metabo Table Saw with Stand Asking $450 Cash Canada Macleod trail, Calgary Alberta (4636 Macleod trail SW, Calgary AB) Monday-Friday 9am-8pm Saturday-Sunday 10am-5pm Holidays 10am-5pm *Note: Our ...
$60.00
Two table saw dado blade sets
Spruce Grove
Two dados. One by Task in new condition , $60. These are both 8". One adjustable dado, 6" $25. PLEASE NOTE. I cannot respond to texts, messages, e mail etc. THE ONLY WAY TO CONTACT ME IS BY TALKING ...
$3.00
Bosch HBT063 5/8 in. Bi-Metal T-Slot Hole Saw
Calgary
PROFESSIONAL HOLE SAW DESIGN – features improved durability, clean performance and easier plug removal in multiple materials ENHANCED M42 ALLOY – contains 8% cobalt alloy to withstand ...
$60.00
Black and Decker Heavy Duty Saw
Carstairs
Black and Decker 8” Heavy Duty Saw Good condition $60
$100.00
Table saw
Ardrossan
Table saw - Xpert 8” deluxe, electric; 3/4 hp; Canadian made; sold by Sears - reduced to $100.00 OBO - Dick - 780-984-4340 or 780-922-5610.
$300.00
Band saw
Medicine Hat
Canwood band saw. Has a 3/4 band and a 3/8 band model pnr10-269 in brand new condition has 14 inch by 14 inch table and band opening up to 7 inch. Price is obo and will deliver to Medicine Hat and ...
$5.00
Saw blades, Various sizes
St. Albert
Various sizes 7 1/4" ($5/each) 8 1/4" ($7.50/each) 10 " ($40/each) saw blades Also adjustable Dado s ($45/each)
$40.00
Freud Finishing Saw Blade
Calgary
New Blade, detail in picture 40 Teeth Titanium Carbide 8-8 1/4”
$85.00
Master Craft Compound Mitre Saw 81/4
Edmonton
Master Craft Compound Mitre Saw 8 1/4 Mounted into a custom saw table with shut off bar. I am not the original owner but this unit has been good to me, I just need more space in my shop. $85
$10.00
Chain Saw Chain (Blade)
Calgary
Two brand new LASER 14in (35cm) saw chain 3/8lp pitch-.050Gauge $10 each call or text 403 629-8759
$65.00
Husky Jobsite Workbench
Edmonton
1.8 ' by 3' portable job site workbench in black. Weight 19.85 lbs., Assembled height is 32 Inch. Storage case included for accessories. Easy to set up. Clamp your mitre saw to table or use as a ...
$5.00
Hand tools
Northeast Edmonton
Voltage and receptacle tester $10 Nose plier $10 Garden tool $5 Cutter $5 Jab saw with wood handle $5 Tin snips $15 Hacksaw $10 8 pieces screwdriver $10 25ft tap measure $5 Level $5 All in excellent ...
$30.00
Assorted asphalt and steel cutting saw blades
St. Albert
11 blades in total. Name your price per disk or 30$ for all. All 14” x 1/8” except for one.
$4,300.00
Optical comparator cylindrical surface cutter tool grinder lathe
Edmonton
JONES & LAMSON EPIC 30 Comparator SPECIFICATIONS: Work Table Travel : Horizontal: 12" Vertical: 8" Lens Centerline to Table with Helix: Minimum 2" Maximum:10" Lens Centerline to Table without Helix: ...
$250.00
Milwaukee 8" metal cutting saw
St. Albert
Used like new, Info in the photo, Check out my other tool ads.

Browse Tools by location