"makita" in Tools in Greater Vancouver Area

Results 1 - 29 of 29


Filters


Category

Tools


Price



Results 1 - 29 of 29

    • Makita Cordless Drill and Flashlight Combo Set with Hard Case

      $129.00

      Makita Cordless Drill and Flashlight Combo Set with Hard Case

      Vancouver

      Gently used. Makita combination kit cordless drill plus cordless flashlight. Cordless drill 12V, battery charger, battery, flashlight is all packed in a hard cover case. Everything works fine. ...

    • Makita: Sawzall JR3070CT

      $95.00

      Makita: Sawzall JR3070CT

      Port Coquitlam

      GUC (Good Used Condition) Makita: Sawzall JR3070CT $95 (firm) set ..... There is 1 for sale ABOUT THIS ITEM: ➣ Powerful 15 AMP motor with electronic speed control maintains constant speed under load ...

    • Assorted Core Bits 2,2-1/2, 3, 4,5',6 (Industrial Grade

      Please Contact

      Assorted Core Bits 2,2-1/2, 3, 4,5',6 (Industrial Grade

      Canada

      THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - NORTH YORK See addresses below Assorted Core Bits The roof-shaped guide teeth ensure improved tool alignment and increased rotational stability. 1)The wedge shape is particularly aggressive in collision with steel reinforcement 2)The effect is supported by the

    • SDS PLUS-sds max Chisels

      Please Contact

      SDS PLUS-sds max Chisels

      Canada

      THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - BRAMPTON See addresses below Visit our website For More Tools http://www.chtools.ca Special impact resistant chisel forged in one piece with high surface-harden. Optimum denudation capacity by maximum energy transmission of the hammer drill to the chisel edge.

    • SDS MAX 4-1/2(12Long) Wide Jumbo Chisel Reg $65 Sale$30

      Please Contact

      SDS MAX 4-1/2(12Long) Wide Jumbo Chisel Reg $65 Sale$30

      Canada

      THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - NORTH YORK See addresses below Assorted Core Bits (Industrial Grade) Assorted Core Bits (Industrial Grade) Industrial grade HEAVY DUTY Heavy Duty Floor Scraper Reg $299 Sale $80 Most Affordable System on the Market Common uses include: Ceramic Tile Removal Vinyl

    • The 37-pound demolition hammer Special Price  Regular Price $900 - Now $499

      $499.00

      The 37-pound demolition hammer Special Price Regular Price $900 - Now $499

      Canada

      CANADIAN ELECTRICAL SAFETY CERTIFIED DRILL (CETL) SIX MONTH WARRANTY THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - BRAMPTON See addresses below Visit our website For More Tools http://www.chtools.ca hex 37-pound demolition hammer Special Price Regular Price $900 - Now $499 BRAND NEW IN THE BOX Description:

    • 4 1/4-inch 110mm Taper Fit TCT Concrete Carbide Hole Saw Dry Core Bit Wall Hole Cutter Industrial Grade

      $119.00

      4 1/4-inch 110mm Taper Fit TCT Concrete Carbide Hole Saw Dry Core Bit Wall Hole Cutter Industrial Grade

      Canada

      Shipping by seller

      4 1/4-INCH 110MM TCT CONCRETE CARBIDE HOLE SAW DRY CORE BIT WALL HOLE CUTTER INDUSTRIAL GRADE Introducing the Industrial grade SDS-Max Carbide Rotary Hammer Drill Core Bit by GTA Diamond Tools. Your ultimate solution for efficient drilling through masonry, brick, Blocks and concrete surfaces. Heavy Duty Taper

      Shipping by seller
    • MAKITA 4-1/2 In. Angle Grinder GA4530 120V 11000 RPM 6A

      $40.00

      MAKITA 4-1/2 In. Angle Grinder GA4530 120V 11000 RPM 6A

      Canada

      SKU: 117359 Model: GA4530 Condition: Used S/N: 0027331Y Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: CHINA Dimensions: 4.50 (H) x 4.50 (W) x 15.00 (L) inches Additional Description: Capacity: 4-1/2" Amp: 6A Speed: 11000 RPM For more information, please contact us at: Lenmark Industries

    • MAKITA 1/2 In. Impact Wrench Nut Runner 6905B

      $50.00

      MAKITA 1/2 In. Impact Wrench Nut Runner 6905B

      Canada

      SKU: 117343 Model: 6905B Condition: Used S/N: 343737E Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 3.50 (H) x 9.00 (W) x 10.50 (L) inches Additional Description: Amp: 4A HZ: 50-60 Hz RPM: 1700 RPM For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave,

    • MAKITA 1/2 In. Corded Hammer Drill HP1501 120V 2800 RPM 5A

      $25.00

      MAKITA 1/2 In. Corded Hammer Drill HP1501 120V 2800 RPM 5A

      Canada

      SKU: 117341 Model: HP1501 Condition: Used S/N: 253486G Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 3.00 (H) x 9.00 (W) x 11.50 (L) inches Additional Description: Capacity: 1/2" Amp: 5 A Speed: 2800 RPM For more information, please contact us at: Lenmark Industries Ltd. 27576 51a

    • KING CANADA Track Connector Kit No. KW-302

      $29.99

      KING CANADA Track Connector Kit No. KW-302

      Canada

      SKU: 61296 Model: KW-302 Condition: New Dimensions: 1.00 (H) x 4.00 (W) x 10.00 (L) inches Additional Description: Product Features - Two 50" Tracks can be joined together using this Connector Kit - Two support strips included to prevent set screws from marring the aluminum Track - Mounts in the slots on top and

    • KING CANADA 2 Pc. Clamp Kit for 50 In. Track No. KW-303

      $39.99

      KING CANADA 2 Pc. Clamp Kit for 50 In. Track No. KW-303

      Canada

      SKU: 61297 Model: KW-303 Condition: New Dimensions: 2.00 (H) x 10.00 (W) x 10.00 (L) inches Additional Description: Product Features - Secures 50" Track to material and/or workbench preventing any shifting - Clamps slide into slots underneath 50" Track Note: ? Optional clamp kit (KW-303) is compatible with Makita®

    • KING CANADA 50 In. Track For Plunge Cut Track Saw No. KW-300

      $79.99

      KING CANADA 50 In. Track For Plunge Cut Track Saw No. KW-300

      Canada

      SKU: 61294 Model: KW-300 Condition: New Dimensions: 1.00 (H) x 7.00 (W) x 50.00 (L) inches Additional Description: Product Features - Extruded aluminum construction - Rubber splinter guard indicates the cut line - Allows easy and accurate straight cuts - Two tracks can be connected together using optional Track

    • MAKITA 115 Volts 4.2 Amp Belt Sander 9030

      $300.00

      MAKITA 115 Volts 4.2 Amp Belt Sander 9030

      Canada

      SKU: 30744 Model: 9030 Condition: Used S/N: 161315E Dimensions: 3.20 (H) x 7.00 (W) x 17.00 (L) inches Additional Description: Voltage: 115 Volts Amperes: 4.2 Amp Hertz: 60 Hz Watts: 490W Max. Pressure: 1000 m/min. For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC V4W

    • MAKITA 7-1/4'' Circular Saw, with Electric Brake 5007FA

      $45.00

      MAKITA 7-1/4'' Circular Saw, with Electric Brake 5007FA

      Canada

      SKU: 24728 Model: 5007FA Condition: Used General Specifications: Blade Diameter: 7-1/4" Voltage: 120 volts Phase: Single-phase Saw Type: Mitre/Crosscut Saws Made In: CHINA Dimensions: 10.00 (H) x 7.00 (W) x 11.00 (L) inches Additional Description: Power: 2000 watts Arbor Size: 5/8" Max. Cutting Capacity (at 90°):

    • MAKITA Portable Band Saw 2107F

      $300.00

      MAKITA Portable Band Saw 2107F

      Canada

      SKU: 24661 Model: 2107F Condition: Used S/N: 53647 General Specifications: Horsepower: 1 hp Saw Type: Bandsaws Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 8.00 (H) x 11.00 (W) x 20.00 (L) inches Additional Description: Power Input: 710W Round Workpiece Capacity: 120 mm (4-3/4?)

    • MAKITA 14 in. Cut-Off Saw 2414DB

      $110.00

      MAKITA 14 in. Cut-Off Saw 2414DB

      Canada

      SKU: 24668 Model: 2414DB Condition: Used General Specifications: Horsepower: 2.2 hp Saw Type: Mitre/Crosscut Saws Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: JAPAN Dimensions: 15.00 (H) x 12.00 (W) x 23.00 (L) inches Additional Description: Wattage: 1650 watts Amps: 15 amp Blade

    • MAKITA 8-1/4 In. Table Saw 2702

      $375.00

      MAKITA 8-1/4 In. Table Saw 2702

      Canada

      SKU: 17448 Model: 2702 Condition: Used S/N: 11531 A General Specifications: Horsepower: 3 hp Table Size: 27" x 22" Blade Diameter: 8-1/4" Voltage: 120 volts Phase: Single-phase Saw Type: Table Saws Dimensions: 42.00 (H) x 25.00 (W) x 28.00 (L) inches Additional Description: Arbor: 5/8" Blade Length: ?22? No load

    • MAKITA 4-1/2 In. Angle Grinder 9524NB 120V 1100 RPM 5A

      $40.00

      MAKITA 4-1/2 In. Angle Grinder 9524NB 120V 1100 RPM 5A

      Canada

      SKU: 107741 Model: 9524NB Condition: Used S/N: 750519 Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: CHINA Dimensions: 4.50 (H) x 4.50 (W) x 15.00 (L) inches Additional Description: Capacity: 4-1/2" Amp: 5A Speed: 11000 RPM For more information, please contact us at: Lenmark Industries

    • MAKITA Screwdriver 6305BV 115V 2500 RPM 4.8A

      $60.00

      MAKITA Screwdriver 6305BV 115V 2500 RPM 4.8A

      Canada

      SKU: 107732 Model: 6805BV Condition: Used S/N: 27560E Electrical Specifications: Voltage: 115 volts Phase: Single-phase Dimensions: 4.00 (H) x 9.75 (W) x 9.75 (L) inches Additional Description: Shank Size: 1/4" Hex Amp: 4.8A Speed: 2500 RPM For more information, please contact us at: Lenmark Industries Ltd. 27576

    • MAKITA 1/2 In. Electric Drill 120V 550 RPM 6.5A

      $50.00

      MAKITA 1/2 In. Electric Drill 120V 550 RPM 6.5A

      Canada

      SKU: 107723 Condition: Used Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 3.50 (H) x 8.00 (W) x 11.00 (L) inches Additional Description: Capacity: 1/2" Amp: 6.5A Speed: 550RPM For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC V4W 4A9

    • MAKITA 7-1/4'' Circular Saw 5007NB 120V 5800 RPM 13A

      $40.00

      MAKITA 7-1/4'' Circular Saw 5007NB 120V 5800 RPM 13A

      Canada

      SKU: 107748 Model: 5007NB Condition: Used S/N: 442597 Electrical Specifications: Voltage: 12 volts Phase: Single-phase Dimensions: 11.00 (H) x 10.00 (W) x 15.00 (L) inches Additional Description: Capacity: - 90° 2-3/8" ( 60 mm) - 45° 1-3/4" (46 mm) Power: 1400W Speed: 5800 RPM For more information, please contact

    • MAKITA Reciprocating Saw JR3050T 120V 2800 SPM 9A

      $30.00

      MAKITA Reciprocating Saw JR3050T 120V 2800 SPM 9A

      Canada

      SKU: 107703 Model: JR3050T Condition: Used S/N: 06S5423 Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: CHINA Dimensions: 4.00 (H) x 7.00 (W) x 17.00 (L) inches Additional Description: Amp: 9 Amp Strokes/min: 2800 spm For more information, please contact us at: Lenmark Industries Ltd.

    • KING CANADA 6-1/2 In. Variable Speed Plunge Cut Track Saw No. KC-8365

      $349.99

      KING CANADA 6-1/2 In. Variable Speed Plunge Cut Track Saw No. KC-8365

      Canada

      SKU: 61291 Model: KC-8365 Condition: New General Specifications: Blade Diameter: 6-1/2" Voltage: 120 volts Phase: Single-phase Dimensions: 9.63 (H) x 9.00 (W) x 23.00 (L) inches Additional Description: Product Features - Plunge Cut Track Saw is ideal for smooth cutting of solid wood and plywood, especially when

    • MAKITA 1/2 In.  Electric Router No. 3612BR

      $200.00

      MAKITA 1/2 In. Electric Router No. 3612BR

      Canada

      SKU: 23146 Model: 3612BR Condition: Used S/N: 160539E Dimensions: 12.00 (H) x 9.00 (W) x 85.00 (L) inches Additional Description: Continuous Rating Input: 1,530W Capacity Collet: 12mm or 1/2-inch Plunge Capacity: 0 - 65mm (0 - 2-9/16-inch) Base Dia.: 160mm (6-1/4-inch) No Load Speed: 23,000 rpm Overall Height:

    • MAKITA 10 In. Miter Saw No. 2401B

      $80.00

      MAKITA 10 In. Miter Saw No. 2401B

      Canada

      SKU: 17057 Model: 2401B Condition: Used General Specifications: Horsepower: 2.4 hp Blade Diameter: 10" Voltage: 115 volts Phase: Single-phase Saw Type: Mitre/Crosscut Saws Dimensions: 19.00 (H) x 18.10 (W) x 20.50 (L) inches Additional Description: Max RPM: 4100 For more information, please contact us at: Lenmark

    • MAKITA 1 In. SDS Plus Rotary Hammer HR2475 120V

      $60.00

      MAKITA 1 In. SDS Plus Rotary Hammer HR2475 120V

      Canada

      SKU: 107714 Model: HR2475 Condition: Used Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: CHINA Dimensions: 3.00 (H) x 8.00 (W) x 19.00 (L) inches Additional Description: Capacity: Concrete 1", Steel 1/2" Blows Per Minute: 0 - 4,500 BPM No Load Speed: 0 - 1,100 RPM For more information,

    • MAKITA Electric Drill 120V

      $35.00

      MAKITA Electric Drill 120V

      Canada

      SKU: 107724 Condition: Used Dimensions: 7.50 (H) x 7.00 (W) x 11.00 (L) inches For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC V4W 4A9 Phone: 604.449.1880 Email: sales@lenmark.com View more products at www.lenmark.com

    • MAKITA 7-1/4 In. Circular Saw 5007FA 120V 5800 RPM 15A

      $50.00

      MAKITA 7-1/4 In. Circular Saw 5007FA 120V 5800 RPM 15A

      Canada

      SKU: 107744 Model: 5007FA Condition: Used S/N: 0049506 Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 10.00 (H) x 10.50 (W) x 12.00 (L) inches Additional Description: Power: 2000 watts Arbor Size: 5/8" Max. Cutting Capacity (at 90 deg): 2-3/8" Max. Cutting Capacity (at 45 deg): 1-3/4"