Tools in Kitimat - Page 25
Results 961 - 994 of 994
Filters
Location
Price
Offer type
For Sale By
Results 961 - 994 of 994
Please Contact
metal deburring and finishing machine | edge rounding machine | sheet metal sander | metal deburrer | metal sanding mach
Canada
Shipping by sellerGECAM plate deburring , edge rounding , polishing machine Sanding machine with 3 or 2 independent units with variable configuration according to the specific finishing needs sheet metal deburring up to 6.7" thickness this sheet metal polishing machine comes with conveyor belt with Variable speed and optional vacuum
Shipping by sellerPlease Contact
Corner Notcher | corner notching machine | metal notcher | combo notching and punching machine | combo notcher and punch
Canada
Shipping by seller2 in 1 metal corner notcher and punch (variable angle) HNM6-VP HNM6 VP combo corner notching and punching machine, can notch sheet metal up to 4 gauge and punch up to Ø 0.55" x 4 gauge The oversized 45” x 24” table includes table guides and miter blocks to ensure accurate notches every time. Blade angle is adjusted
Shipping by sellerPlease Contact
fully automatic mitering bandsaw | Metal band saw | horizontal bandsaw | steel band saw | NC metal cutting bandsaw
Canada
Shipping by sellerFully Automatic NC Bundle Cutting & Mitering Band Saw : ARG CF-NC ARG 260 CF-NC 10.24" 9.65" 9.84"x9.65" ∡0-45° ARG 300 CF-NC 11.8" 11.22" 12"x11.42" ∡0-45° ARG 330 CF-NC 13" 12.6" 14.17"x9.84" ∡0-45° Standard Features: this automatic bandsaw's cast iron shuttle features automatic multi-indexing
Shipping by sellerPlease Contact
mandrel Pipe bender | programmable tube bender | NC Pipe bender | NC pipe bending machine | steel pipe bender 1-1/4 inch
Canada
Shipping by sellerSFB 32 NC hydraulic mandrel bender with NC controller Ø32 x3mm (Ø1 1/4" x 1/8" ) Comes with 2 sets 1 1/4" and 1" tube toolings CSA approved electric panel 220 volt single phase MADE IN TURKEY Features: Mobile NC Control Unit with 4.7" TFT Touchscreen Special Design Direct Drive Reducer Brake Motor for precise
Shipping by sellerPlease Contact
60 ton Ironworker Machine | Iron worker machine | double piston Ironworker | metal ironworker | hydraulic ironworker
Canada
Shipping by sellerHKM55 5 in 1 Hydraulic Iron worker machine from SAHINLER - MADE IN TURKEY (Brand New) 60 US Ton - 55 Metric Ton Punching :Ø 4”x1/8” angle cutting : 4 ¾” x 4 ¾” x1/2” rod and square bar cutting : 1 9/16” flat bar shearing : 7 7/8x13/16” – 11 13/16”x9/16” notching : 1/2" MADE IN TURKEY European Hydraulic and electric
Shipping by sellerPlease Contact
corner sander | corner seam sanding machine | weld seam sander | weld seam grinder | weld seam blending machine GECAM131
Canada
Shipping by sellerCorner weld seam grinding machine | weld seam sander GECAM 131 This machine is ideal for grinding and polishing enclosures of most materials for most four sided boxes. Sand welded edges or polish the surfaces on steel enclosure boxes. Increase efficiency and save time grinding and polishing enclosures This oscillated
Shipping by sellerPlease Contact
pipe polisher | pipe sander | pipe grinder | pipe rust remover | centerless tube sander | tube polishing machine 128SL
Canada
Shipping by sellerCenterless Pipe sander GECAM 128SL Ø 3/16" - 6" centerless sand belt grinder for satin finishing and polishing of pipes Ø3/16" - 6" work piece easy adjustment by handwheel on prismatic support guide centerless pipe sanding machine table is covered with anti-friction plastic material two centerless grinding heads
Shipping by sellerPlease Contact
seam sander | corner seam sanding machine | weld seam sander | corner weld seam blending machine | weld seam grinder
Canada
Shipping by sellerCorner weld seam grinding machine GECAM 136 This machine is ideal for grinding and polishing enclosures of most materials for most four sided boxes. Sand welded edges or polish the surfaces on steel enclosure boxes. Increase efficiency and save time grinding and polishing enclosures This oscillated Belt Grinding
Shipping by sellerPlease Contact
MRM-S Plate roller | plate rolling machine | Aluminum composite roller | pinch roller | ACM roller | plate bending roll
Canada
Shipping by sellerMRM-S 3050x190 : 10' x 3/16" (3050x4mm) MRM-S 3050x160 : 10'x 1/8" (3050x3mm) MRM-S 2050x190 : 7' x 1/4" (2050x6mm) MRM-S 1550x170 : 5' x 5/16" (1550x8mm) MRM-S 1550x130 : 5' x 1/4" (1550x6mm) plate bending machines from ISITAN - MADE IN TURKEY (Brand New) suitable for rolling aluminum composite material ( ACM
Shipping by sellerPlease Contact
20mm (13/16 in.) portable rebar bender | stirrup bender | Rebar bender | single phase rebar bender | 110 -220volt-1phase
Canada
Shipping by sellerMG20S portable Rebar bending machine - Stirrup Bender Ø 13/16" (20mm) motorized portable rebar bender this portable rebar bender is especially designed for small construction works and it's very light programmable automatic stirrup bending feature foldable stand for easy transportation comes with the work stop
Shipping by sellerPlease Contact
24mm (1 in.) rebar cutter | rebar cutting machine | bar cutter | rebar shearing machine | rebar shear cutter | bar shear
Canada
Shipping by sellerPOWER24 portable Hydraulic rebar cutter Ø 15/16" (24mm) hydraulic steel bar cutting machine with spring return system over load protection Thanks to the pressure safety system this steel rod cutter is perfect for Small Projects low power consumption rebar cutting machine silent, safe and environment friendly joystick
Shipping by sellerPlease Contact
26mm (1 inch) rebar bender | stirrup bender | Rebar bending machine | bar bender | bar bending machine 110-220volt 1phas
Canada
Shipping by sellerBT26 portable Rebar bender - Stirrup Bender Ø 1" (26mm) portable bar bender this portable rebar bender is especially designed for small construction works and it's very light programmable stirrup bending feature In compliance with CE regulations comes with a stand adjustable bending angle adjustable bending speed
Shipping by sellerPlease Contact
36mm (1-7/16 inch) rebar bender | stirrup bender | Rebar bending machine | stirrup bending machine | bar bender
Canada
Shipping by sellerB36 Rebar bender - Stirrup Bender Ø 1.4" (36mm) rebar bending diameter: Ø1.4" (36mm) PLC controlled rebar bender adjustable bar bending angle by switch and pins programmable stirrup bending function turning left and right controlled manually or automatically. different types of bending (like stirrup, spiral bending)
Shipping by sellerPlease Contact
45mm (1-3/4 inch) rebar bender | Rebar bending machine | stirrup bender | bar bender | rod bender | bar bending machine
Canada
Shipping by sellerB45 Rebar bender and Stirrup Bending machine Ø 1 3/4" (45mm) PLC controlled rebar bender adjustable bar bending angle by switch and pins turning left and right controlled manually or automatically. programmable stirrup bending function different types of bending (like stirrup, spiral bending) are possible by
Shipping by sellerPlease Contact
bead roller | Hydraulic rotary machine | 3/8 inch HIBKS 4 bead roller | rotary machine | bead rolling machine
Canada
Shipping by sellerHIBKS 4 Hydraulic bead roller - rotary machine 9 gauge (4mm - 3/8") Hydraulic top roll down feed welded plate steel frame Industrial-grade gearbox comes with a brake to maintain accuracy. throat depth in this bead rolling machine is suitable for working on the edges of material. Foot pedal controls leave your
Shipping by sellerPlease Contact
12.6 in. double mitering band saw | Horizontal Bandsaw | swiveling bandsaw | metal cutting band saw | metal bandsaw
Canada
Shipping by seller12 5/8" Semi-automatic band saw + Hydraulic vise + ±45° & +60° swiveling head to left and right + digital angle display + blade speed control by inverter drive , from BEKAMAK - MADE IN TURKEY BMSY 320DGH 12.6" 12.6" 17.7" x 12.6" -45° ---> +60° Features: • Easy to read digital angle scale with angle locking
Shipping by sellerPlease Contact
12.6 inch fully automatic metal Bandsaw with NC control | Horizontal bandsaw | Metal cutting band saw | metal band saw
Canada
Shipping by seller12.6" fully automatic metal cutting bandsaw + touch screen NC controller + motorized feeder + Hydraulic vise + speed control by inverter , from BEKAMAK - MADE IN TURKEY BMSO 320E 112.6" 11.8" 12.6"x11.8" 90° Features: • motorized feeder • Automatic PLC, touch screen control, programmable up to 30 jobs with 50
Shipping by sellerPlease Contact
66 Ton Hydraulic Ironworker | Ironworker machine | metal punching machine | hydraulic iron worker | angle cutter
Canada
Shipping by sellerHKM60 5 in 1 Hydraulic is the best Ironworker machine from SAHINLER - MADE IN TURKEY (Brand New) 66US ton - 60 Metric Ton punching : Ø 1 1/8” x 9/16” angle cutting : 4 3/4” x 4 3/4” x 1/2” rod and square bar cutting : 1 9/16" flat bar shearing : 7 7/8" x 13/16" and 11 13/16" x 9/16" notching : 3/8" MADE IN TURKEY
Shipping by sellerPlease Contact
pipe polisher | tube sander | pipe grinder | pipe rust remover | pipe sander | bent pipe polishing | pipe polishing
Canada
Shipping by sellerBT114-s automatic pipe polishing machine - pipe sanding machine - pipe grinding machine - from SAHINLER - MADE IN TURKEY (Brand New) perfect for removing rust from pipe and square tubing sands both straight and bent tubes round and saure tubes can be sand by this machine you can have your required finish grains
Shipping by sellerPlease Contact
HPK60 - 3 inch angle roller | tube roller | Profile rolling machine | angle roll | pipe roller | tube bender pipe bender
Canada
Shipping by sellerHPK 60 hydraulic profile rolling machine - profile bender - ring roller from SAHINLER - MADE IN TURKEY (Brand New) flat bar rolling (Hard way) : 3 1/8" x 13/16" Square tube rolling : 2 3/4" x 2 3/4"x 1/8" round tube rolling : 3"x 1/8" Angle rolling : 2 3/4" x 2 3/4" x 1/4" T beam rolling : 3 1/8" x 3/8" U channel
Shipping by sellerPlease Contact
HPK50 - 2 inch roll bender | tube roller | pipe roller | ring roller | profile bender | Angle roll | Profile rolling M/C
Canada
Shipping by sellerHPK 50 hydraulic roll bender from SAHINLER - MADE IN TURKEY (Brand New) flat bar rolling (Hard way) : 2 3/8" x 3/8" Square tube rolling : 2 " x 2 "x 1/8" round tube rolling : 2"x 1/8" Angle rolling : 2" x 2" x 1/4" T beam rolling : 2 3/8" x 1/4" U channel beam : 3 1/8" All 3 rolls of HPK roller ring turn on industrial
Shipping by sellerPlease Contact
94 Ton Hydraulic Ironworker machine | Iron worker machine | metal punching machine | best ironworker machine in market
Canada
Shipping by sellerHKM85 5 in 1 Hydraulic Iron worker machine from SAHINLER - MADE IN TURKEY (Brand New) 94 US Ton - 85 Metric Ton punching : Ø 1 5/16” x 13/16” angle cutting : 5 5/16” x 5 5/16” x 9/16” rod and square bar cutting : 2" flat bar shearing : 14 15/16" x 13/16" notching : 1/2" MADE IN TURKEY European Hydraulic and electric
Shipping by sellerPlease Contact
127 Ton Hydraulic Ironworker | Ironworker machine | iron worker machine | metal Punching machine | 5 workstations
Canada
Shipping by sellerHKM115 5 in 1 Hydraulic Ironworker machine from SAHINLER - MADE IN TURKEY (Brand New) 127 US Ton - 115 Metric Ton punching : Ø 1 5/16” x 1” angle cutting : 5 5/16” x 5 5/16” x 5/8” rod and square bar cutting : 2 3/16" flat bar shearing : 14 15/16" x 1" notching : 1/2" MADE IN TURKEY European Hydraulic and electric
Shipping by sellerPlease Contact
24mm rebar bender | portable rebar bender | automatic stirrup bender | 220 volt single phase rebar bending machine
Canada
Shipping by sellerR24 portable Rebar bender - Stirrup Bender Ø 15/16" (24mm) powered portable bar bender this portable rebar bender is especially designed for small construction works and it's very light stirrup bending feature on automatic mode programmable bending angle adjustable bending angle adjustable bending speed by inverter
Shipping by sellerPlease Contact
Ø 45mm rebar cutter | rebar cutting machine | bar cutter | rebar shear | rebar shearing machine | rebar stack cutter
Canada
Shipping by sellerH45 Hydraulic rebar cutter - rebar shear Ø 1 3/4" (45mm) double acting hydraulic rebar cutter this rebar cutting machine can be controlled both automatically and manually. over load protection Thanks to the pressure safety system this steel rod cutter is perfect for large Projects low power consumption rod cutting
Shipping by sellerPlease Contact
4 Roll Plate roller | plate rolling machine | plate bending machine | plate bending roll | pinch roll | hydraulic roller
Canada
Shipping by seller4RHSS 4 roll Hydraulic plate bending roll thickness 1/8"- 3" length 5'-20' hydraulic steel plate bending machine uses a planetary gearbox connected to a robust motor to drive the top and side rolls at a 5 & 16 feet per minute. direct linear piston movement for the lateral and pinch rolls is standard for even more
Shipping by sellerPlease Contact
RM slip roll 5 ft x 1/16 in. and 4 ft x 3/32 in. | pinch roller | slip roller | initial pinch roll | plate roller
Canada
Shipping by seller2 types of slip rolls are available: RM 1270x90 : 4' x 12 gauge (3/32") - 1270x2.5mm RM 1550x90 : 5' x 14 gauge (1/16") -1550x2mm 2 Rolls Powered Mobile foot pedal Precise Bending with Brake Motor casted frame sheet metal slip roller manual drop end SAE 1050 Certificated Steel Rolls with High Tensile Strength
Shipping by sellerPlease Contact
IRM 1550 plate roller | plate bending roll | slip roll | initial pinch roller | 5 ft x 1/8 in. and 5 ft x 3/16 in.
Canada
Shipping by seller2 type plate rollers are available: IRM 1550x110 : 5'x10 gauge (1/8") - 1550x3mm IRM 1550x140 : 5'x8 gauge(3/16") - 1550x4mm in IRM plate bending rolling machine 2 Rolls are Powered comes with Mobile foot pedal Precise plate roll bending machine with Brake Motor casted frame steel sheet rolling manual drop end
Shipping by sellerPlease Contact
IRM 1270 plate rolling machine 4 ft x 3/16 in. and 4 ft x 5/32 in. | plate roller | plate bending roll
Canada
Shipping by seller2 type plate rollers are available IRM 1270x120 : 4' x 8 gauge (5/32) - 1270x4mm IRM 1270x140 : 4' x 6 gauge (3/16) - 1270x5mm in IRM plate bending rolling machine 2 Rolls are Powered comes with Mobile foot pedal Precise plate roll bending machine with Brake Motor casted frame steel sheet rolling manual drop end
Shipping by sellerPlease Contact
combo rebar bender and cutter | 2 in 1 rebar cutter & bender Ø36mm
Canada
Shipping by sellerMAX40 combo rebar bending and cutting machine Ø1.4" (36mm) 2 in 1 stirrup bending and cutting machine Hydraulic rebar cutter and mechanical rebar bender 3 different angles adjustable by electronic system turning left and right in this rebar cutter and bender can be controlled manually or automatically On-demand
Shipping by sellerPlease Contact
10 inch Bandsaw | Metal bandsaw | swiveling head bandsaw | horizontal bandsaw | benchtop bandsaw |manual saw ARG260 PLUS
Canada
Shipping by sellerARG 260 PLUS E-F 10.24" 9.45" 11.8"x7.3" -45° to +60° mitering manual double Mitering Metal cutting Band Saw ARG 260 PLUS E - F Standard Features: • Manual head uplift • manual Quick clamp vise • Blade breakage switch • this cutting bandsaw adjustable down feed speed by hydraulic valve • -45° to +60° double mitering
Shipping by seller$54.95
STINSON® 23.5-INCH TOOLBOX AND ORGANIZER FOR ONLY $54.95!
Canada
Shipping by sellerSTINSON® 23.5-INCH TOOLBOX AND ORGANIZER CONVENIENT TOOL STORAGE AND TRANSPORTATION FOR WORK SITES OR YOUR OWNGARAGE! Stinson toolboxes are designed with lift-out trays and high-impact plastic for longevity. These boxes are your best option for storing or transporting your tools. Features Measures 23.5" (60 cm)
Shipping by seller$899.99
HOC CM3 3-1/2 CUBIC FT. CEMENT MIXER + 90 DAY WARRANTY + FREE SHIPPING
Canada
Shipping by sellerWWW.HOUSEOFCONTRACTORS.COM - 1(844)440-4014 - FINANCING & LEASING OPTIONS AVAILABLE! FREE SHIPPING + ENJOY OUR LOWEST PRICE POLICY + CASH BACK REWARDS + 90 DAY WARRANTY ! HIGHEST RATED INDUSTRIAL EQUIPMENT SUPPLIER ON GOOGLE, BING AND YAHOO! BUY FROM A BUSINESS YOU CAN TRUST! AWARDED CANADIAN SMALL BUSINESS! CM3
Shipping by seller$799.99
PC-14 3/4 inch Plasma Cutter 3 year warranty
Canada
Shipping by sellerThe PC-14 is our forth generation plasma cutter with a brand new Look, added 4T option makes this unit easy to set up on any CNC table. Call us with any questions 250-613-7523 PC-14 Plasma Cutter Product Specifications: Model: PC-14 50A Plasma Cutter (Air) DC INVERTER Uses Compressed Air needs 60-75 PSI @ 4CFM
Shipping by seller
Browse other categories in Buy & Sell in Kitimat
Browse Tools by location