12'' x 20'' Magic Flexi "3D puffed" Heat Transfer Vinyl
- More Info
Item: Chemica Magic Flex "3D Puffed" heat transfer vinyl Size: 12'' wide by 20'' long Color options: White, Black (please add a note of your color selection on the checkout page) ** A low tack application tape to transfer the material is recommended (Siser TTD Easymask)
MAGIC FLEX Polyurethane film with puffed effect for heat transfer applications. The product puffs up with heat temperature.
White color can be printed as well with solvent / eco-solvent inks. The puffed effect will reduce the colours and give a vintage effect. ** Please click example pictures to see in details **
Thickness: 4.7mils Carrier: Transparent polyester.
Suitable for: Cotton, polyester, acrylic and similar fibres. Application advice 1) Cut (or print and cut if you print the ref. 1201) the material in positive with a regular flex blade. 2) Weed the excess material. 3) Use a low tack application tape to transfer the material 4) Heat pressing in two steps: 1st: position and heat press the heat transfer on the garment protected by a silicone paper at 160°C (USA: 320°F) 10 seconds – at the lowest pressure. Remove the application tape immediately after heat pressing. 2nd: heat pressing without application tape (neither tape nor silicone paper) at 160°C (320°F) 30 seconds - at the lowest pressure.
Contact:Sign Supply Canad 6635 Kitimat Rd, Unit 42 Mississauga, ON L5N6J2 Phone#: 905-608-2680 http://www.signsupplycanada.com