CAR LIFT 4 POST HOIST - $4585.00 - CLENTEC

ATLAS GARAGE PRO 8000- $4,585.00 + HST

- CLENTEC -

- ATLAS AUTOMOTIVE EQUIPMENT -

- SALES - INSTALLATION - SERVICE - PARTS - - TORONTO - 647 207 2081 - LONDON - 226 236 7379 / 226 456 7379 - ST. CATHARINES - 905 246 4644

4 POST CAR LIFT / 4 POST CAR HOIST

We are proud to announce the arrival of the newest in our Atlas series of quality lifts: The Atlas Garage Pro 8,000 LB. capacity 4 post storage/service Lift. We believe that the Atlas brand above ground auto lift offers a competitive priced above ground auto lift that offers more features and benefits than the ever increasing number of "Chinese" auto lifts sold by no-name Internet marketers. All Atlas portable four post lifts (8,000 lb. capacity) are designed and built for use by Mr. Homeowner or restoration shop. If you have questions about which lift will best suit your application, please ask us.

HIGHLIGHTS ;

• 8,000 lb. capacity • Powder coat finish • Diamond plated runways • Single point lock release • 3x plastic drip trays included • Caster kit with polyurethane wheels (optional) • Steel jack tray (optional) • Steel approach ramps included • Four wheel stops included • Perfect for storing or working on vehicles

SPECIFICATIONS ;

Capacity - 8,000 LB Lifting Height To Top Of Runway - 72" (6') Clearance Under Runways - 67 ½" (5' 7 ½") Height of Columns - 83" (6' 11") Overall Width (Without Motor) - 104 ½" (8' 8 ½") Overall Width (With Motor) - 115" (9' 7") Overall Length with Approach Ramps - 206 ¾" (17' 2 ¾") Overall Length without Approach Ramps - 175 ½" (14' 7 ½") Approach Ramps - 36 3/8" (3' 3/8") Runway Width - 18 ½" (1' 6 ½") Runway Length - 165 ¾" (13' 9 ¾") Runway Thickness - 4 ½" Width Between Runways - 37" (3' 1") Width Between Runway Rails - 31 ½" (2' 7 ½") Outside Runway to Outside Runway - 74 5/8" (6' 2 5/8") Size of Column - 6 1/4" x 3 3/8" Clearance Between Columns - 94 ½" (7' 10 ½") Length Between Columns - 157 ½" (13' 1 ½") Base of Column - 10 1/8" x 11 3/4" Maximum Wheel Base - 153 ½" (12' 9 ½") Drive Thru (Outside of tire to outside of tire) - 80 ½" (6' 8 ½") Cable Diameter - .350" Gauge Of Steel 6 Gauge - (.1875"/ 3/16" / 4.75mm) Motor - 110 Volt

Benefits Of Our Atlas Garage Pro 8000 Four-Post Car lift;

Lock Ladder Column Design: The new Atlas Garage Pro 8,000 lb. Storage Lift has the "lock ladder" column design system. We believe that the lock ladder system is the safest locking system for any four post lift. The lock ladder system also provides an infinite number of runway locking positions. The "old-style" welded locks could not be adjusted. The lock ladder is adjustable inside the column so that our customers can "micro-manage" the correct runway height to accommodate any vehicle. The "lock ladder" column system is the same column system found on professional grade lifts found in car dealerships and automotive service centers. Safety Lock System: This Atlas Garage Pro 8,000 lb. Storage Lift locking system offers a unique two position locking mechanism found only in commercial grade cable style four post lifts. Flow Restrictor: The Atlas Garage Pro 8,000 lb. Storage Lift has flow restrictor valves installed in the hydraulic system. Some lifts do not require a flow restrictor. Zerk Fittings: The Atlas Garage Pro 8,000 has zerk fittings in each corner to allow the proper flow of grease to the pulleys that are used to route the oversized cables. Polyurethane Caster Wheels (optional): The Atlas Garage Pro 8,000 has an optional polyurethane wheel caster kit. These no-mar wheels allow the operator to roll the lift over an expensive epoxy floor with little risk of damage. Even if you have and old concrete floor, the polyurethane wheels on the Atlas Garage Pro 8,000 make this lift easier to roll than the caster kit with the steel wheels. Manual Single Point Release: The Atlas Garage Pro 8,000 lb. Storage Lift has manual single point release that allows the operator to release all the safety locks at one time. Does Not Need To Be Anchored To The Floor: The Atlas Garage Pro 8,000 lb. Storage Lift DOES NOT need to be anchored to the floor. However, if you are using a four post above ground lift many times each day, the lift may "scoot" a little on a smooth concrete floor. All four post lifts will move slightly on a smooth concrete floor if there is a constant flow of vehicles on and off the lift. The stability and integrity of the lift will not be compromised by the slight "scooting" of the four post lift. To eliminate the possibility of any "scooting", we recommend you anchor (with just one anchor) two of the column bases to your concrete floor. This anchoring will prevent the lift from "scooting".

$4,585.00 + HST

DELIVERY / INSTALLATION AVAILABLE

- CLENTEC -

- ATLAS AUTOMOTIVE EQUIPMENT -

- SALES - INSTALLATION - SERVICE - PARTS -

- TORONTO - 647 207 2081 - LONDON - 226 236 7379 / 226 456 7379 - ST. CATHARINES - 905 246 4644

Also Available; TIRE CHANGERS - WHEEL BALANCERS - 2 POST LIFTS - 4 POST LIFTS - ALIGNMENT MACHINES - etc.

PLEASE CALL FOR MORE INFORMATION