1979 Chevrolet Van C10 Prototype Van

We take Trades plus Certified Check. The Very Rare Chevrolet Prototype Van Not a G10 or G20 Van This is Chevrolet c10 Prototype If you own a Chevrolet with the plant code "O" it was assembled in West Pontiac Assembly where all the Prototypes were Assembled This is Chevrolet Test Prototype for 1979 Research and Discover! This is The Original Patents, Dimensions from Chevrolet built in 1979 but are the Original Alloy Composites included? A Class Action Law Suit on GMC Corporation will surely determine that! What’s the 5x5 bolt pattern patents? We Own and Discovered The Original 5x5 Wide Five Configurations from a Late Model Race Stock Car Chassis H. R. E (Howe Racing Enterprise) see pictures for Origins of the Howe 2”Bearing Hub and the Modern Three Bolt Rack an Pinion Steering that were “THE ORIGINAL FIRST PARTS POURED at the West Pontiac Assembly Plant, The Michigan Foundry” I have one Important Question The 5x5 Configuration is standard correct? but is it the standard configuration for all bolt patterns? 6 bolt-8 bolt-ect.ect.? and is this the STANDARD CONFIGURATION used by all the North America automobile manufacturers? If so you’re original 5x5 wide five hubs & patented alloys can be valued in the Trillions not Millions. just to let you know what you should be first investigating. “obvious the same dimension configuration for all North American Automobiles from 4 bolt to heavy equipment also the OEM/aftermarket rims/tires that bolt to the hubs” Great Discovery! Good Luck with your sale "You should also investigate the European an Asia Bolt Pattern Dimensions" “Your 5x5 wide five bolt pattern are the one and only standard Patented configuration dimensions” “These Patents are the main parts for the Spinning Wheel” Guaranteed Solid Investment! We take trades plus Certified Check. Invest in the Best. Investor Opportunity. Reference (nailhed.com) (pontiac west assembly plant)