FPV 5.8Ghz Diversity Monitor 7inch - HD 32 Channel
NOW WITH INTEGRATED BATTERY AND POWER SUPPLY !
Also check the Bracket for Monitor : Click Here
If you are looking for a easy to use FPV system on the ground then this is the ideal setup. The monitor and receivers are built ito one unit that allows you to quickly setup your FPV gear on the ground with no messy or complicated wires. Making for easy transportation/storage. Simply plug the power/battery into the monitor!
The built in 5.8Ghz Diversity will ensure you always get the best possible signal, and allows you to use different antennas if you require. This monitor is also ultra bright and comes with a sunshade visor.
This is a high resolution 7 inch (1024 x 600 resolution) FPV Monitor with a built in 5.8Ghz Diversity Receiver. This monitor is ideal for those who want FPV system that is quick to setup and easy to transport. Because the 5.8Ghz Diversity receiver is built in you don't need to worry about lots of wires or batteries to power each individual part, you just need to plug the monitor into your battery/ other power source and you are good to go. You can still use this FPV monitor/receiver with some goggles via the video outputs. The built in 5.8Ghz Diversity receiver will always ensure you are getting the best video signal and also allows you to use two different antennas if you want.
This monitor is compatible with the 5.8Ghz transmitters we sell. But if you are unsure, please make sure that the channel frequencies that the transmitters put out will match a channel on this receiver.
• High sensitivity diversity receivers for the best possible reception
• Supports DNR
• High resolution screen (1024x600px)
• No blue screen
• Supports Airwave and NextWave transmitters and many others on 5.8 Ghz due to the 32Channel diversity receiver.
• Supports image rotation.
• HDMI 1.3 digital input port
• Screen size:7”
• Resolution: 1024 x 600
• Brightness: 300cd/m2
• Contrast: 700:1
• Frequency : ISM 5.8Ghz
• RX sensitivity: -90dBM
• Diversity: Yes
• Video Standard: NSTC/PAL (automatic switching)
• Video Output Level: 1.0Vp-p, 75ohm
• Audio Output Level: 1.0Vp-p, 10Kohm
• RX1 AV Out: Video, mono audio output
• RX2 AV Out: Video, mono audio output
• AV In: Video, stereo audio output
• HDMI input
• Built in Speaker X2: 8ohm, 1W
• DC In / Out: 7 ~28V (suggested to use 3S lipo battery (1000mah) with JST connector
• Size: 183x126x19.5mm
• Temperature: -10
• 1 x monitor
• 1 x light shield
• 2 x 5.8G 2db antennas
• 2 x AV out cables
• 1 x Power cable with JS connector
Working frequency ISM 5.8GHz
Band CH 1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
A 5865M 5845M 5825M 5805M 5785M 5765M 5745M 5725M
B 5733M 5752M 5771M 5790M 5809M 5828M 5847M 5866M
E 5705M 5685M 5665M 5645M 5885M 5905M 5925M 5945M
F 5740M 5760M 5780M 5800M 5820M 5840M 5860M 5880M