Drop Frame Loaded Truss
The perfect festival rig!!
This kit consist of 5 loaded 10’ trusses each with 8 par 64 lights and has 2 soca inputs feeding 12 L5-20 panel mount connectors. You can add 4 other fixtures which are available on each loaded truss. 4 empty 5’ trusses and 2 empty 10’ trusses complete the package. This system can be deployed as a downstage truss with 2 loaded 10’ , one 10’ empty in middle ( use circuits in loaded truss for leko’s other fixtures) and two 5’ trusses for the ends. The upstage truss can be three loaded 10’ truss with another 12 extra available L5-20 panel mount connectors.
Made by Petes Lights (Performance Lighting). The internal bars are extruded aluminum I-beam style with Twelve (12) L5-20 outlets and two 19pin socapex. They are so strong because of their design. They use a special quick clamp (included) to hold the fixture to the bar. This also allows the fixtures to glide along anywhere on the bar and then lock down in position. You may hang fixtures from either side of these bars (top/bottom). Are wired as 6 circuit using standard 19pin socapex, Lots of flexibility. Bars are just shy of 10 feet long. The internal bars were made to fit into 10 feet Petes Lights prerig box truss.
The truss can travel 5 high stacked if need be . The fixture bar pivots and drops once you fly it off ground by simple pull pins. There is also room to have drop down bars at back of truss to put in other fixtures
· 5 -10 foot trusses loaded with 8 par 64 fixtures, 2 soca panel mount connectors feeding 12 L5-20 circuit · 4 – 5 foot trusses unloaded · 2 – 10 foot trusses unloaded · Grade 8 bolts and washers for connection · Manufacturer Pete’s Lights (Performance Lighting)
Additional fixtures lekos,fresnels, pars are also available as well as cabling and dimmers - sold seperate