Micros POS system - 12.1" touchscreen, other peripheral availabl

U S E D

six Machines available

159 dollars each firm, no offers

pick up only

6477665655

Specs:

The Workstation 4 LX is based on the popular Workstation 4 and from the outside looks very much the same - using the casework, power supply, LCD, touchscreen and Mag Stripe Reader from original model. A Blue Operator LED and IO panel labeling distinguishes the LX from the original WS4. Inside the unit however, a new system board combines a powerful AMD embedded Processor/TFT LCD controller with USB Flash Drive technology for improved performance. From the application perspective, the LX is a new workstation and requires specific MICROS application versions to operate. See page 2-12 for application software requirements.

Magnetic Card Reader The 3-track magnetic card reader can be serviced in just a few minutes. The reader is connected to the system board with a modular connector. Operator LED The WS4 LX Operator LED is Blue, the primary means to distinguish this unit from the original WS4 with a Green or Amber Operator LED. Operator Power Switch The recessed power switch is located at the lower right corner of the unit. It is used to power the workstation on or off. Compact Flash (CF) Personality Card Figure 1-2 shows an underside view of the workstation featuring the I/O Connectors, and Compact Flash access slots. Note that the labeling is Blue in color help distinguish the WS4 LX from the original WS4. More information about the I/O Panel Connectors can be found in Chapter 3. The CF card is secured behind a removable bracket at the IO connector panel. The CF card contains the application, system registry, and optionally, Stand Alone Resilient (SAR) totals. In other words, it contains the ‘personality’ of the workstation. Should the workstation fail, the CF card can be removed and installed in the replacement workstation. Mini-PCI Socket The WS4 LX System Board includes a Mini-PCI socket, replacing the PCMCIA socket in the original WS4. The Mini-PCI socket can be used for a wireless interface card. The IO panel includes a cut-out for mounting a flexible rubber antenna. Reset Switch The Reset Switch can be activa