3 Vintage Realistic Scanners, 2 Partially Work, For Parts!

$25
Posted over a month ago
Parksville, BC V9P 1A2(View Map)
  • Condition
    Used - Fair

    Description

    3 different Vintage Realistic Radio Frequency Scanners, Listen to Fire, Ambulance & More. I am sharing my notes below for each scanner. These notes are just observations taking a quick look at them. I may have missed stuff, it's not exhaustive diagnosis. These are being sold as parts, this is an "AS IS SALE" No Refunds.

    There was a few scanners, in this listing you are dealing with scanners (item numbers) 2, 4, & 6. All of these scanners have a plug that goes into your standard 110 Volt electrical receptacle. There are two antennas with this order.

    Two of the scanners have manuals that come with them. One of the scanners does not have it's original manual.

    Item Number: Scanner 6 (PRO-2003) 50 Channel

    Works, but volume button has short in it, or getting worn. Have to go onto a frequency manually, squelch all off, adjust volume to a position you can hear the normal background static, then turn squelch up. It did scan through frequencies. Battery compartment in back, battery is good (not corroded), but the foam backing to battery plate has deteriorated away. Removed what was left and cleaned it up a bit. Front headphone jack appears to have the front section break off at one point. It is still intact an in position. May still be able to plug a headphone jack in, haven't tested it.

    Antenna: This scanner likes the antenna that comes with this order for Scanner 4 below. Meaning this antenna will work on either Scanner 4 or 6 with this listing. The antenna I am talking about is the bigger type that connects in the back. This unit has a second option for an antenna, the little hole at the top corner of the scanner, you can also go with a smaller screw in type (telescopic) of antenna. That type is not with this order. You get the bigger one that goes in the back with this order.

    Item Number: Scanner 4 (PRO-45) Appears to be an older style scanner that uses crystals for the frequencies. I got the volume and squelch to work when it was powered up, but no lights would come on when I pressed/depressed buttons.

    Antenna: Is larger type that plugs into the back, when full extended it is 40" (inches) in length. This antenna fits scanner 6 as well up above.

    Item Number: Scanner 2 (PRO-2010) It allowed me to input frequencies, but scan button didn't want to work. Had to start scanning had to turn unit off and then back on. Then it started scanning. Has a scan speed button that has two speeds. That button worked. One speed is slow, one is faster. Had to have volume up full blast to hear audio. Possible short in volume control, or the control may be worn down.

    Antenna: This unit has an antenna that comes with this order.

    Can ship for an additional fee. Shipping is via Canada Post with tracking information. Can ship all over Canada. Anyone living in any of the territories, be aware that shipping rates are higher to send items off to your area.

    Additional Options

    The following services are also made available by this seller. Please reach out to them for more info as there may be additional costs.
    • Cash accepted
    Owner
    1 listing
    --
    avg reply
    --
    reply rate
    --
    on Kijiji
    Take steps to make your Kijiji transactions as secure as possible by following our suggested safety tips. Read our Safety Tips