Zon Sonus Custom - 4 string Bass

It took me about 16 months to get this beauty. (Ordered 23/07/2018 received on 21/11/2019) I’m not using it as much as I should that is why I’m willing to let it go. It is in a as new condition. It is the most versatile instrument I have ever played. The top is a very rare piece of spalted albino bubinga which came from Joe's personal collection. The neck is made of graphite, so it sounds even and is very stable. The two next 2 questions were taken from Zon’s website about the neck. Neck What are the advantages of the composite neck on the Zon bass? The benefits of our composite neck are that it is extremely stable and will not warp or twist like wood. This means that no adjustments are required and your bass will remain playing consistently great for years to come. Furthermore, these materials enhance the instrument's sound, the bass has better definition, cutting clarity, and attack, and every note across the entire fingerboard is even in sustain and volume, without any dead spots.

Is the fingerboard graphite, too? No, the fingerboard is called phenowood, which is actually wood (usually birch) that has been impregnated with a phenolic resin. Layers of wood are compressed under heat and pressure, resulting in a material similar to ebony in hardness and appearance, yet it is much more stable.

Now, here are the specs of the bass: Body Material: Light Weight Mahogany Finish: Gloss Finish Color: Spalted Albinos Bubinga (Gallery Top) Tone Plate: Wenge

Neck Type: Composite, bolt-on design Scale length: 34" Finish: Flat urethane Fingerboard: Phenowood with Luminlay Side Dots Radius: 12" Nut: Graphite Frets/size: 24/medium Width at nut: 1.532" Width at 24th fret: 2.437"

Electronics Type: ZP-2D active system made for Zon by Polyfusion. Functions: Master volume (Push/Pull Active/Passive), pickup blend, Bass & treble (Stacked), midrange controls(Push/Pull 250/800 hz) and Tone Control. Power requirements: Single 9-volt battery Life expectancy: 300 hours of continuous use.

Pickup Make: Exclusively designed for Zon by Bartolini. Type: Neck: Original Quads with special wiring to get P and Reverse P Bridge: 2J square

Hardware Bridge: ZON. Machined brass. String spacIng .750"/19mm (string-to-string center) Tuners: Gotoh GB-7 with a Hipshot X-tender Finish: Black and Gold

I’m asking a firm 9500$ for it. It would cost you a lot more to get it now with the inflation going on and the import fees without also considering the wait. It comes from a smokefree environment. Let me know if you need more information or pictures.