Danfoss ABV-NC 082F0052 24 Volt Thermal Actuator / Danfoss VMT 065F8961 1/2" Valve. In Very Good Condition.
Tested and Working, actuator and valve are used and in very good condition. Wired with Molex Male / female disconnect plugs.
The ABV is a thermo-hydraulic actuator mounted on the VMT valve is for two point control used to control floor temperature, floor heating systems, hot-water service systems, zone valves and district heating systems.
Features:
Adjustable flow limitation
manual operation
1VDLEA222 © Danfoss 03/14
ABV Thermo-Hydraulic Actuator
Electronic Actuator
• Low voltage, 24 volt thermo-hydraulic actuator
• Power consumption 9VA
• Built-in manual operation
• Built in stem travel limiting
ABV is recommended for flow temperature
control as well as ON/OFF control in hot water
systems.
Applications include heat exchangers,
zone control for mixed loop systems, and storage tanks.
Used on flow temperature or floor heating
system
Supply voltage 24 V ~ +30%, -15%
Frequency 50-60 Hz
Control signal 2-point (ON/OFF)
Consumption 9VA
Time for full spindle travel < 9 min
Max. permissible spindle travel ABV-NO: 4mm
ABV-NC: 2.2mm
Ambient temperature 32-140°F (0-60°C)
Weight 0.6 lb
Actuator mounted onto 2-way: RAV, VMT / 3-way: KOVM
Mounted orientation Any orientation, except upside down
Stem force 18 lbf (80N)
The VMT is a 2-way valve used in controlling the flow of hot water within heating applications. The VMT valve can be installed in applications involving heating or chilled coils, hot water storage tank, plate heat exchanger or floor heating system. In the control of the VMT valve, the ABV thermostatic operator mounted to the valve to regulates the temperature and flow through the valve.
See my other listings.
