2023 OKADA 7500 FT LB 250-450 CLASS EXCAVATOR HAMMER/BREAKER

THE OKADA 7500 FT LB HAMMER NEW COST IS $105,000.00 PLUS TOP MOUNTING BRACKET OKADA FACTORY 0 HOURS SINCE $35,000.00 COMPLETE REBUILD C/W 6 MONTH OKADA WARRANTY

SEE IMAGE 4 FOR WHAT A DEALER WANTS FOR A NON WARRANTY UNIT 3 SERIAL #'S OFF THIS OKADA FACTORY REBUILT AND WARRANTED HAMMER

THE OKADA 3000 FT LB HAMMER NEW COST IS $55,000.00 PLUS TOP MOUNTING BRACKET AND PINS TAKE IT FOR $25,000.00

NOTE : THESE ARE HIGH QUALITY JAPANESE HAMMERS FROM OKADA DEMOLTION PRODUCTS BETTER QUALITY THAN NPK AS THEY HAVE A LARGE BUILT IN ACCUMALTOR THAT IS EASY ON YOUR HYDRAULIC SYSTEM AND NOT CHEAP KOREAN KNOCK OFF HAMMERS LIKE STANLEY - LABOUNTY AND MANY DEALERS LIKE SHEARFORCE - WHOSE HAMMERS THEY BUY CHEAP RELABLE THEM AND SELL THEM - THESE CHEAP KOREAN HAMMERS LAST AT THE MOST 6 MONTH BUT MANY FAIL LONG BEFORE AND TRY AND GET THEM REPAIRED ??

OKADA STAGE II REBUILDS ON BOTH HAMMERS - THESE HAMMERS ARE LOCATED AND WILL BE SHIPPED FROM OUR LANGLEY BC YARD AND WE WILL PAY THE TRUCKING TO BUYER IS CLOSE TO #1 HWY

THESE ARE TWO LOW HOUR OKADA 2020 HAMMERS BUT NOW CONSIDERED 2023 HAMMERS BOTH TOTALLY REBUILT WITH STAGE 2 REBUILD KITS WHICH INCLUDED ALL NEW BUSHINGS - NEW SEAL KIT - NEW PISTONS AND ONE NEW ORIGINAL OKADA MOIL AND 1 SLIGHTLY USED ORIGINAL MOIL POINT SO TWO MOIL POINTS .

RESEALED AT OKADA FACTORY REPAIR SHOP - BOTH WERE LITTLE USED - RESEALING DUE TO SITTING DUE TO COVID - BUT DECIDED TO MAKE THEM BOTH AS NEW c/w 6 MONTHS FULL WARRANTY FROM OKADA NORTH AMERICA

2020 Okada ORV7500 Hydraulic Demo Hammer Breaker Chisel Attachment Tool

LOW HOUR 2020 MODEL 7500 FT LB HAMMER USED 1 JOB BEFORE COVID - CURRENTLY FINISHED A COMPLETE REBUILT TO NEW AT OKADA'S OREGAN FACTORY REBUILD FACILITY

HAVING A JUST HAD A $36,000.00 CDN COMPLETE RESEAL AND NEW NITROGEN CHARGE ALONG WITH NEW FACTORY PISTON AND ALL NEW BUSHINGS AND SEAL KIT COMES WITH 1 NEW OKDA MOIL POINT AND 1 AS NEW OKADA MOIL POINT SO 2 NEW POINTS

WILL BE SHIPPED DIRECTLY FROM OUR LANGLEY BC YARD THERE TO BUYERS YARD - WILL SHIP ON OUR ACCOUNT WE GET FAST SERVICE AND GREAT RATES

TAKE OKADA ORV7500 — MID CLASS HYDRAULIC BREAKER READY TO WORK FOR $45,000.00 CDN

SEE IMAGE 3 FOR INVOICE IN USD FOR THE FACTORY REBUILT - RESEALED UNIT PRICE - THE ONLY THING WE DID NOT DO IS SANDBLAST AND PAINT AS THEY STATED IT WOULD BE A WASTE AS THE PAINT WAS GOOD AND AFTER ALL IT IS A HYDRAULIC HAMMER??

AND ALSO TAKE THE OKADA TOP150 — 3000 FT-LBS CLASS HYDRAULIC BREAKER FOR $25,000.00

FRANK 604-476-7777

OKADA ORV7500 — MID CLASS HYDRAULIC BREAKER

ORV Series hydraulic breakers for use with skid steer loaders, mini and small excavators and tractor loader backhoes.

AUTO-LUBE

A central grease port with internal grease passage allows you to easily adapt the hammer to most auto lube systems.

MAIN VALVE

The internal control valve system equates to faster speeds and higher impact energy while still allowing the breaker to operate at cooler temperatures.

ACCUMULATOR

The large capacity accumulator reduces shock load in the system.

STROKE ADJUSTER

Variable speed control in the breaker maximizes productivity.

ORIGINAL HOLDING SYSTEM

The powercell is securely held inside the bracket with the head damper, reducing recoil.

LARGER N2 GAS CHAMBER

Ensures high impact power.

LONG STROKE PISTON

Increases impact power and reduces vibration and recoil.

DUAL CHISEL RETAINING PIN

Heavy-duty chisel set pins in many Okada models offer extended service life.

DURABLE BREAKER BRACKET

Includes a heavy-duty bottom plate that protects the powercell and reduces noise and vibration.

Technical Data

IMPACT ENERGY CLASS 7500 ft-lb / 10170 JOULES OPERATING WEIGHT 5950 lbs / 2698 kg OIL FLOW 63-72 gpm / 238-272 lpm FREQUENCY 230-400 bpm L-mode / 270-470 S-mode OPERATING PRESSURE 2320-2600 psi / 157-180 bar MECHANICAL ENERGY 98-133 HP / 73.4-99.5 KW MECHANICAL ENERGY AVG 115.5 HP / 86 KW UNIT WORKING LENGTH 124 in / 315 cm TOOL DIAMETER 6.1 in / 155 mm TOOL WORKING LENGTH 30.2 IN / 767 MM 85DB(A) LEVEL DISTANCE 119-167 ft / 36-51 M CARRIER WEIGHT RANGE 60-92 lbs. / 27-42 M ton

OKADA TOP150 — 3000 FT-LBS CLASS HYDRAULIC BREAKER

Okada’s medium class breakers are available in a wide range of designs, from those specifically engineered to provide maximum impact energy for the toughest rock applications to others suited for a combination of concrete and rock breaking with the potential for faster blow speeds.

Precision machining processes and strict Okada quality control are used to produce all main breaker components. There is no need for complete assembly replacements and the use of high precision parts mean economical, labor-saving rebuilds of your Okada breaker.

Breaker brackets are made of heavy gauge high tensile steel plates and are designed to give maximum protection to the breaker body and dissipate heat while making it easier to access the equipment during daily maintenance inspection.

Okada bushing designs, a special heat treatment process and individually lubricated bushings enhance the service life of wear parts.

Technical Data:

IMPACT ENERGY CLASS 3000 ft-lb / 4068 JOULES OPERATING WEIGHT 3000 lbs / 1361 kg OIL FLOW 30-35 gpm / 114-132 lpm FREQUENCY 600-750 bpm L-mode OPERATING PRESSURE 2030-2620 psi / 140-180 bar MECHANICAL ENERGY 42-63 hp / 31-47 kw MECHANICAL ENERGY AVG 52.5 hp / 39 kw UNIT WORKING LENGTH 94 in / 239 cm TOOL DIAMETER 4.8 in / 122 mm TOOL WORKING LENGTH 24 in / 610 mm CARRIER WEIGHT RANGE 28-42 lbs. / 13-19 M ton

WE ALSO HAVE A $80k NEW OLD STOCK OKADA DEMOLTION PROCESSOR THAT FOR 200-350 CLASS MACHINES - SEE MY OTHER ADS FOR $35,000.00