STORE LOCATION: 545 TELFER St S, Winnipeg, MB
https://altitudoaudio.ca/products/mitmat-platter
Description
DESIGNED AND MANUFACTURED IN CANADA ! 3MM THICK iSOLATION MAT, IMPROVES DETAIL ,CLARITY.AND AUDIO RESOLUTION.
ONLY HEAR WHATS IN THE GROOVE HEAR AND NOTHING ELSE !
Microcell rigidized foam damps low-frequency resonance, reducing it by 3-10 dB Micrometer-flat sandwich layers top and bottom constrain resonance and damp mid-to-high frequency platter ringing by up to 20 dB The 300 mm MITMAT diameter carries LPs around their outer lip and around the label ridge, providing superb support and protection during play – no spindle/center weight or clamp is needed or recommended. Your turntable motor will thank you! MITMAT's reduction of low-level noise and ringing help you hear only what's in the groove MITMAT's 3mm thickness is ideal for most tonearm setups when replacing any stock platter mat between 2-5 mm No label recess means the MITMAT is consistent in thickness through the crucial label/spindle area, providing equally consistent resonance damping across its entire surface
The 3 mm platter mat is completely flat for maximum contact with the platter and ideal for most tonearm setups, replacing stock mats between 2-5 mm.The 3 mm thickness will have minimal, if any, affect on the Vertical Tracking Angle (VTA).
The 300 mm* MitMat diameter carries LP’s around their outer lip and around the label ridge, providing superb support and protection during play. No spindle/centre weight is needed.
No label recess ensures the MitMat is consistent in thickness through the crucial label/spindle area, ensuring equally consistent resonance damping across the entire surface of the mat.
The microcell technology not only absorbs but also spreads the tremendous localized vibrational energy from the stylus/groove interaction uniformly across the entire mat without peaks/and valleys, down into the platter where the excess vibrational energy is “drained away” as heat.
The material is also highly effective in reducing static
