Bubble-Boba-Milk-Tea-Shaker-Shaking-Machine-Mixer-Auto-Control-Cream-Stainless - FREE SHIPPING
Description
-
- When cleaning, please turn off the power and pull the plug.
- After use, please clean and wipe the body immediately.
- Adjust the shrapnel to an appropriate location by using an M6L-type wrench (The cup put on the cup holder, then push the cup (with the cap) forward, if the shrapnel can press the cup lightly, then the shrapnel is at the appropriate location).
- When placing the cup, place the cup bottom aligned the cupholder.
- Push the cup (with the cap) forward.
- Acess the power cord to the power, then rotating the timer to set the corresponding time. (Milkshake time was about 10-20s, the factory has been set up. )
- Put the cup (with the milk) on the cupholder, Push the cup (with the cap) forward.
- Press the Start button (the green one), the machine began to work, and it will stop at the set time. If you want to stop the machine within the set time, please press the Emergency Stop button (the red one).
Double-cup Bubble Boba Milk Tea Shaker Stainless Steel 400r/min Auto Shaking Machine for Commercial or Home Use
This latest double-cup auto milk tea shaking machine is made of stainless steel material and could replace the process of manual shaking. You just need to set the time, then press the start button, it will shake and stop by itself. High quality and high efficiency, time-saving. It is suitable for many sizes of shaker cups (350-700ml shaker cup), can shake two cups at the same time. It is widely used in restaurant, cake room, coffee shop, bakery, food stores and beverage stores.
The ways of cleaning:
Operating Instructions:
Adjustment and placed the cup
Start and stop
- Latest double-cup auto milk tea shaking machine, all stainless steel material.
- The machine could replace the process of manual shaking in the milk tea production process.
- Suitable for the shaking of milk tea, boba tea, beverage etc.
- A mechanical arm can be adjusted to meet a variety of different sizes of snow grams Cup.
- Stainless steel body is made of thick stainless steel, weighing 25 KG, more stable and secure.
- Intelligent switch whose operation is simple and convenient is Special control procedures, and you can stop at any time.
- Timer is the use of a microcomputer chip circuit board, 0-60 seconds long-term precision timing.
- Pure copper motor is High-power, lasting strong power, safe and durable.
- Sliding base allows the machine to swing up and down with full power so that its sliding resistance is smaller.
- Power cord is removable standard three-pin plug, safe and secure.
- Cup seat is a stainless steel cup holder, which allows you to secure the cup.
- 0-60 seconds long-term precision timing.
- Special control procedures, you can stop at any time.
- Suitable for the shaking of milk tea, boba tea, beverage etc.
- Double frame for the shaker, and double switch, the simplicity of operator.
- Simple and stable structure; very easy to operate, clear and maintain.
- Latest double-cup auto milk tea shaking machine, all stainless steel material.
- Cup seat is a stainless steel cup holder, which allows you to secure the cup.
- A mechanical arm can be adjusted to meet a variety of different sizes of snow grams cup.
- The machine could replace the process of manual shaking during the milk tea production process.
- Intelligent switch whose operation is simple and convenient is special control procedures, and you can stop at any time.
- Voltage: 60hz/110V
- Power: 120W
- Velocity Ratio: 400rmp/min
- Net Weight: 25kg(60lbs)
- Timer: 1-60s
- Sizer of Shaker Cup: 350-750ml
- Product Size: 350300355mm(13.8"11.8"14")
- 1 x Main Unit Milk Tea Shaking Machine
- 1 x English Manual
- 1 x Power Cord
- 1 x L-type Hex Wrench
- 2 x Cups(750ml each one)
FREE SHIPPING TO MOST MAJOR CITIES
Over 230 Sold -
Shipped from Canada prices are in Canadian dollars
BUY WITH CONFIDENCE
SEE SOME OF OUR MANY ITEMS ON EBAY
We have a 100% ebay rating with over 1500 positive feedbacks
Usual shipping times 5 10 business days
TO ORDER:
Log onto www.ideal-bargains.com and order from website
OR
Please send us an email (surreyone@gmail.com ) with the product(s) wanted along with your complete ship to address and contact telephone number - we will then send you an invoice with payment options.
Any questions call us at 604-831-4796
Terms:
Item has 30-day bench warranty - unit must be returned to seller for repairs - buyer pays freight to and from their location and is responsible for any freight damages or freight delays.
All return items must have prior written permission from the seller
