Kensol K25T, Air-Operated Hot Foil Stamping Press, 1-1/2 Ton, 115VAC, 1000W This is a used Kensol Air-Operated Hot Foil

Kensol K25T, Air-Operated Hot Foil Stamping Press, 1-1/2 Ton, 115VAC, 1000W

This is a used Kensol Air-Operated Hot Foil Stamping Press, Model K-25-T. This model has a pressure range of up to 1 1/2 tons @ 80PSI. It has a 6 x 8 inch impression area with a 1,000-watt heating system allowing it to reach temperatures of up to 550 degrees. The Kensol 25T can stamp items up to 6 inches high and automatically compensates for thickness variations in items being stamped. For setup, a hand lever was installed to bring the head up or down. This unit is in good condition with a few blemishes from long term storage.

• Impression Area: 6 x 8 inches
• Heating System: 1000 Watts
• Head stroke: 3 inches
• Depth of Throat: 6 1/2"
• Maximum Opening (with head in up position): 9 inches
• Pressure Range: up to 1 1/2 tons @ 80 PSI
• Dwell Timer: 0-5 seconds
• Electrical Requirement: 115V AC
• Compressed Air Requirements: 10 CFM when operated at 100 PSI

Located Colborne, Ontario