4 units available for immediate delivery. Purchased but never installed. Maintained by JCI quarterly to ensure their operation. 1000 ton cooling capacity at specified conditions. Full specifications available.
Johnson Controls/York YK Water Cooled Centrifugal
Chillers with 1000 Tons cooling capacity (at specified
conditions) rated with 460/3/60 supply. Chiller shall be
supplied complete with evaporator, condenser, compressor,
motor, Johnson Controls/York Control Center and all safeties
and controls to ensure proper chiller operation. The following
options are included:
Unit Options:
• Shell/Compressor Package: PEPG Shells w/ K1 Compressor
• OptiSound Control
• Low Voltage Motor Package (60 Hz): EB
• NEMA 1 Control Panel and Wiring, 40-110 Ambient
• Neoprene Pads Mounting
• CRN/ARN Construction (Ontario)
• NRCAN Submittal (Energy Efficiency Reporting)
• Hot Gas Bypass to 10 Percent Load, NEMA 1
• ASHRAE Standard 90.1 Compliance Label
• Isolation Valves
• ASME Manufacturer's Data Report U-1
• Form 2 Shipment (Refrigerant shipped separate from chiller)
• Complete Chiller Wrapping
• Factory Mounted Smart Chiller Equip Board
• BACnet/ModBus/N2 Gateway for Connection to BAS
Starter - Variable Speed Drive
• Variable Speed Drive For EB Motor
• model number: VSD1055KFT-46
• IEEE Std. 519-1992 Harmonic Filter
Evaporator:
• Evaporator Marine Water Box (2 Pass, 150 PSIG DWP)
• Water Box Hinges (Both Ends)
• Evaporator Tube No.: 371 (0.025" Enhanced Copper)
• Grooved Nozzle Connection (ANSI/AWWA C-606)(12")
• Factory Thermal Insulation for Evaporator - 3/4" (19 mm)
Condenser:
• Condenser Marine Water Box (2 Pass, 150 PSIG DWP)
• Water Box Hinges (Both Ends)
• Condenser Gas Inlet Diffuser
• Condenser Tube No.: 471 (0.025" Enhanced Copper)
• Grooved Nozzle Connection (ANSI/AWWA C-606)(Not AGS)(14")