Item number 142011
This is for 10KV AC and DC test. RK267 seriesvoltage withstand test instruments are for general- purpose HV test operation,It can be widely used for voltage withstand test in electrician’s assistant instrument,rubber-wooden facility, voltage convertor, wires, power meter, motor, powersupply plug, cables and all kinds of electronic and electric products. As thelaunch of the national security standard, Voltage withstand instrument has becomeone of necessary withstand test instruments to the radio and electronicproducts manufacturer.
Operating request: Environmental temperature 0~40
Relative dumidity75%
Parameters:
Description: digital display with remote control
Test Voltage (AC): 0~10KV +/-5%
Test Voltage (DC): 0~10KV +/-5%
Leakage Current (AC): 0~2/20mA +/-5%
Leakage Current (DC): 0~2/10mA +/-5%
Timing (s): 0~99s; Manual control
Pmax: 100VA
Converter Volome: Converter Volome
Input Voltage (Power): 110V
Weight: 40lbs
Pre-used Caution:
Read the following items carefully before operating RK267series voltage withstand test instrument
1. Use three-hole power supply plug and insure GND connection well.
2. GND port and power supply GND port should be connected well.
3. Wear insulation glove, stand on insulation mat.
4. Anti-clock wisely circumvolve “V-ADJ” rotary switch to the maximum beforeturn on test instrument.
5. Before preset all functions, reset instrument.
6. Don’t connect test port and test wire when doing test.
7. Don’t connect HV output port with shield box or GND wire to avoid instrumentdamage.
8. Turn off power when accident takes place.
9. Examine and repair when Indicator or annunciator is out of function
10. Operate carefully to avoid hazard when take the remote test.
11. The instrument must be placed on the worktable of conductive materials.
12. The operator can not wear clothes with metal decoration or wear metalaccessories.
13. When the tester is in the test conditions, the test line, the test probes,output end , and the test objects are all with high pressure, do not touch!
Item Included (142011):
1×Withstand voltage test equipment
1×High voltage test bar
1×Remote control test bar
1×Ground wire
1×power cord
Notice
1.Limited stock, please purchase ASAP if you want it.
2.Before pickup, please call us to make sure.
3.The price will be adjusted when there's large fluctuationsin exchange rates and raw material costs.
4.Advertising price does not include the tax.
Warehouse Address:
2220 Midland Ave., Unit 60AP (Administration Park)
Scarborough, ON M1P3E6
Business Hours:
Monday - Friday 9:00am - 4:30pm
Saturday & Sunday Closed
* For PICK UP, appointment by phone needed.
Tel:(647)350-2889/(416)727-3877
http://www.asc365.com/