Item number: 028353
-
Product Overview:
Miniature lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies. For example, turning inside and outside cylindrical surface, cone surface, ring groove and forming turning surface, turning end face and all kinds of commonly used metric thread, cone surface, ring groove and forming turning surface, turning end face and all kinds of commonly used metric thread.
The design of this new lathe is a great innovation, it solves many disadvantages of other lathes in the past, greatly improves the processing accuracy and processing efficiency, can save a lot of precious time for you, choose it you will not regret!!
Product Parameters:
Model: RC-210E
Voltage: AC110V 50/60Hz(Brushless Motor)
Power: 1100W(1.5HP)
Length of center: 23.62"(600mm)
Swing Over Bed: 8.27"(210mm)
Rotary diameter of tool rest: 5.51"(140mm)
Spindle bore: 1.50"(38mm)
Diameter of chuck: 4.92"(125mm)
Width of lathe bed: 3.94"(100mm)
Thread standard: Metric/imperial/customized
Turning delay start time: 1s-30s
Number of Spindle Speeds: Infinitely variable speeds
Range of Inch Threads: 10-44T.P.I
Range of metric threads: 0.5mm-3mm
Spindle taper: MT5
Knife rest labour: Horizontal four-station
Spindle rotation speed: 50-2500rpm
Precision of the spindle: 0.01mm
Automatic feed range: 0.01mm-0.4mm
Tail frame taper: MT2
Maximum stroke of tool rest plate: 2.16"(55mm)
Maximum stroke of middle plate: 2.95"(75mm)
Maximum stroke of bottom plate: 19.68"(500mm)
Maximum stroke of tailstock sleeve: 2.36"(60mm)
Package size: 41.7"*18.5"*20.1"(106cm*47cm*51cm)
Net weight/Gross weight: 136.7LB(62kg)/178.6LB(81kg)
Note:The yellow on the lathe bed and chuck is antirust oil, Belong to normal phenomenon,which can be wiped off with oil or gasoline before use.Be sure to clean the anti-rust oil on the chuck before starting and turn the chuck by hand to prevent the chuck from jamming and causing the circuit board to burn out!!
Product Features :
1.Metric & Imperial
Switching between metric and imperial is no longer required by changing gears! Only need to operate through the pannel, save a lot of time!
2.Gearless Design
New gearless design! Brand new belt drive! Lower noise, no longer need to change gears to adjust the processing thread, only need to operate on hte panel, processing efficiency greatly improved!
3.Self-acting Feed
Self-acting feed design solves many disadvantages of manual feeding, and can set self-acting feed speed through the panel, greatly improve the matching accuracy and efficiency.
4.Speed Control Knob
The spindle rotation speed is divided into two adjustable gears, respectively 50-1250rpm and 1250-2500rpm. The panel can observe the rotation speed in real time, which is flexible and convenient.
5.4-way Tool Post
The adjustable 4-way tool post on the lathe allows you to easily change your cutting tools. The 8 screws allow you to better grip th etool and finish the machining efficiently.
6.Three Jaw Chuck
High-precision three-jaw chucks with 125mm clamping diameter are used to clamp square and round materials firmly, we also offer optional four-jaw chucks.
7.Accurate Tailstock
The tailstock is movable and fixed, with a maximum center distance of 31.5 inch at the far right. With the MT#2 taper in tailstock spindle, this lathe machine is capable of adjusting set screws for accurate operation.
8.Switch
Control panel above the design of forward and reverse switch and start & emergency stop switch, easy to operate, in case of emergency can immediately cut off the power supply, to ensure personal safety.
9.Metric Scale
Precise metric scale are provided on the saddle handle, the tailstock handle and the movale cneter, allowing for more accurate and professional work. If you need the inch can be customized.
10.Wide Application
The mini metal lathe is suitable for many processing tasks including turing, drilling, threa ding and cutting and so on. It can meet most of your DIY processing needs.
Prduct Advantages:
- It can automatically switch between metric and inch systems without changing gears.
- In the X axis direction can be automatic feed, no manual; Automatic feed speed can be adjusted; Automatic feed range reached 0.01mm-0.4mm!
- There are three ways to start turning: manual start, automatic start, delay automatic start.
- Indexing function: you can switch the direction of turning tool through "DIR" button; Angles can be cleared with one click.
- Control panel set parameters after saving and start, can realize reciprocating turning function and turning thread.
Item included: 028353
RC-210E lathe *1
Base oil pan *1
English manual *1
Oil can *1
Hexagon wrench *5
Open spanner *2
The screwdriver *2
Chuck jaw *3
Chuck spanner *1
Notice
1.Limited stock, please purchase ASAP if you want it.
2.Before pickup, please call us to make sure.
3.The price will be adjusted when there's large fluctuations in exchange rates and raw material costs.
4.Advertising price does not include the tax.
Warehouse Address:
2220 Midland Ave., Unit 60AP (Administration Park)
Scarborough, ON M1P3E6
Business Hours:
Monday - Friday 9:00am - 4:30pm
Saturday & Sunday Closed
* For PICK UP, appointment by phone needed.
Tel: 647-350-2889 416-727-3877
http://asc365.com/newproductdetail.asp?productid=028353&typeid=2104