No Longer Available - 2008 HAAS TL-2**AUTO TURRET**LOW Please Contact
HAAS TL-2 CNC TOOLROOM LATHE 2008 CONTROL: HAAS CNC CONTROL MAX SWING OVER BED: 20" MAX SWING OVER CROSS SIDE: 11" MAX CUTTING DIAMETER: 16" MAX MACHINING LENGTH: 48" X-AXIS TRAVEL: 8" Z-AXIS TRAVEL: 48" SPINDLE SIZE: A2-6 BAR CAPACITY: 3" SPINDLE ...
Please Contact
Mississauga
25/04/2024
Just Purchased , Excellent Condition Samsung CNC Lathe with ***Live Tooling*** **Low Hours** Swing 20.08" Maximum Turning Diam. 13.78" Machining Length 20.47" Chuck Size 8" Bar Capacity 2.68" Power ...
Please Contact
Mississauga
25/04/2024
LIKE NEW Haas ST-15 CNC Lathe with good options and V2 Haas Bar Feed ** Only 896 cutting Hours** Barrie warehouse! Control Haas Chuck Size 8" Spindle Nose A2-6 Bar Capacity 2.5" Swing 16.5" Turning ...
Please Contact
Mississauga
25/04/2024
Like New installed in 2014' Haas VF-2TR 5-axis CNC Machining Center with Trunion Table **Only 1.400 cutting Hours** Barrie warehouse! ***Save from New on a Great Machine!*** Control Haas Table: 36”x ...
Please Contact
Local Business
City of Toronto
24/04/2024
LILLIAN, 5VH, 10" X 50", TURRET MILL, 5 HP, HEIDENHAIN, 3-AXIS, DIGITAL READOUT
Please Contact
Local Business
Mississauga
24/04/2024
2008 HAAS VF-2 Table Size: 36" x 14" Table Capacity: 3,000 pounds X-Axis Travel: 30" Y-Axis Travel: 16" Z-Axis Travel: 20" Spindle Taper: BT 40 Spindle Speed: 8,000 rpm Main Motor: 20 hp Tool Changer ...
$3,000.00
Mississauga
23/04/2024
3-Axis Turret Mill SUPERMAX with Olofstrom PLC Controller. Works excellent and available for viewing or demo.
Please Contact
Local Business
Mississauga
19/04/2024
2015 HAAS VF-3YT SPECIFICATIONS: X 40" Y 26" Z 25" POWER 30 hp RPM 15,000 RPM # ATC 24 TAPER CT 40 TABLE-W 25" TABLE-L 54" # AXIS 3 CONTROL CNC (Haas 32 bit) Catalog Specifications - Buyer to verify ...
Please Contact
Local Business
Mississauga
17/04/2024
2007 HAAS TM-2 SPECIFICATIONS: TABLE WORKING SURFACE ............... 10.5" X 57.75" MAXIMUM WORK PIECE WEIGHT ON TABLE .. 1000 LBS TRAVELS: LONGITUDINAL(X) ..................... 40" (1016mm) CROSS(Y) ...
Please Contact
Local Business
Mississauga
17/04/2024
2015 HAAS ST-30 CNC LATHE Specifications Machine Control Haas CNC Control Maximum Swing 31.75" Maximum Turning Diameter 18" Maximum Machining Length 23" Maximum Bar Capacity 3" X-Axis Travel 12.5" ...
Please Contact
Local Business
Mississauga
17/04/2024
HAAS TL-2 CNC TOOLROOM LATHE 2008 CONTROL: HAAS CNC CONTROL MAX SWING OVER BED: 20" MAX SWING OVER CROSS SIDE: 11" MAX CUTTING DIAMETER: 16" MAX MACHINING LENGTH: 48" X-AXIS TRAVEL: 8" Z-AXIS TRAVEL: ...
Please Contact
Local Business
Mississauga
17/04/2024
2020 Haas TM-1P X-Axis Travel: 30" Y-Axis Travel: 12" Z-Axis Travel: 16" Spindle Speed: 6,000 RPM Spindle Taper: CAT 40 Spindle Motor: 7.5 HP Tool Magazine Capacity: 10 ATC Control: Haas CNC Equipped ...
Please Contact
Local Business
Mississauga
17/04/2024
2009 HAAS VF-2 VERTICAL MACHINING CENTER SPECIFICATIONS: X-AXIS TRAVEL.......................... 30" Y-AXIS TRAVEL.......................... 16" Z-AXIS TRAVEL.......................... 20" SPINDLE ...
Please Contact
Local Business
Mississauga
17/04/2024
2009 HAAS VF-5D/40TR SPECIFICATIONS: TRAVELS X-AXIS ............................................................. 50" Y-AXIS ............................................................. 26" Z-AXIS ...
Please Contact
Local Business
Mississauga
17/04/2024
2013 HAAS VF-3 Table Size L x W: 48” x 18” X Axis Travel: 40” Y Axis Travel: 20” Z Axis Travel: 25” Rapid Rate X Axis: 1000 IPM Rapid Rate Y Axis: 1000 IPM Rapid Rate Z Axis: 1000 IPM Max Table Load: ...
Please Contact
Vaughan
16/04/2024
1998 Haas HS1RP CNC Horizontal Machining Center. 20HP Vector Drive. 710IPM Brushless Servos. Haas CNC Control Console. 360/480V, 3PH, 50/60HZ, 20A, Interrupting Capacity 10000A. X Axis Travel: 24", Y ...
Please Contact
Mississauga
14/04/2024
Used Haas UMC-750SS 5-Axis Vertical CNC Machining Centre Haas Super Speed 5-Axis VMC Date of Mfg. 07.2018 Power on hours: 25,396 hrs Cycle start Time: 6614 hrs Feed Cutting Time: 4617 hrs ...
Please Contact
Mississauga
04/04/2024
HAAS ST-20Y CNC Turning Centre + HAAS Bar Feeder. Date of Mfg. 08/2019 LOW HOURS: Cycle Start Time: 7818 hours Feed Cutting Time: 6205 hours Specifications: Chuck Size...................... 8" ...
$4,500.00
Oakville
26/03/2024
Were bought for Haas CNC's 1 year or so ago, Company moved back to USA no longer needed.
$55,000.00
Mississauga
06/03/2024
2003 NAKAMURA-TOME SUPER NTJ CNC Turning Centre Double spindle / double turret Y-axis on top turret Top turret B-axis tilts turret 180 degree No bar feeder included Specifications: # ...
Please Contact
Local Business
Brampton
06/03/2024
Here Is A Haas HS1RP CNC Horizontal Machining Center We Have In Stock, If You Require Anymore Photo`s & Info Please Call Or E-mail Us. Specifications: Model - HS1RP Year - 08/1998 Pallet Size (2) - ...
| See More Ads |