Aluminum Smelting Furnace

Brand New Aluminum Smelting Furnace.

1 Ton Batches.
Make Aluminum into Ingots & Alloys. Turn your scrap into gold.
Start your own aluminum smelting business today and make thousands a day.

TECHNICAL SPECIFICATIONS OF HYDRAULICALLY TILTING TYPE AL. MELTING FURNACE CAP 1 TON /BATCH WITH BRICK LINING


Max Temp 900 C


Design Cap 1000 Kg.


Furnace Tilting Operation Hyd.Operated


Scrap Charging Manual



Burner


Type of Burner Diesel Fired


Burner Firing Capacity 50 liters / Hour maximum


No. of Burner 01


Fuel Natural Gas (Cv = 8,200 KCal./Kg) Diesel (CV = 9500 KCal/kg)


Burner Control Manual


Burner Ignition Manual



Blower


Blower Type: Entec make centrifugal blower with 5 HP motor and 32 inch wg pressure Air CFM : 600 (Motor in client scope)



Pumping Unit


Oil Pumping Cap


1W 1S Pump with 1HP pump (20 lpm)



FURNACE SHELL: The main rectangular furnace shell will be fabricated out of M.S. plates of 8 mm thick duly reinforced with steel structure like angles and channels etc. Furnace will be mounted on base frame of ISMB150 for reducing civil foundation)



FURNACE LINING Furnace hearth/Side wall up to molten metal level:


Hi/Al 60-65 % bricks: 230mm thk.


Insulation bricks: 115 mm thk.


Insulite castable: 75 mm thk


Total Thickness: 420 mm



Side wall above the molten metal level:


Hi/Al. 45-50%: 230 mm thk.


Insulation bricks: 115 mm thk.


Hysil Board: 50 mm thk


Total Thickness: 395 mm



Furnace Roof (Brick Lined)


Hanger & Shoulder: 230 mm thk.


Insulation bricks: 75mm thk.


Total Thickness: 305mm thk.



TILTING ARRANGEMENT


The furnace tilting arrangement will be effected through 2 nos. Hydraulic cylinders along with suitable power pack assembly the proposed cylinders will be connected to the sides of the furnace shell. The furnace will have LIPAXIS tilting design.



For more information please contact
___________________
WE MANUFACTURE ROTARY SCREW COMPRESSORS AND INDUSTRIAL AIR SYSTEMS