Peavey PVX-12 passive unpowered speakers

Peavey PVX-12 passive unpowered speakers Great speakers/monitors but band went with another set Price is $500 for the pair or best offer The go for around $550 + tax each brand new Located in Tweed can test and hear them if you want. Peavey PVX-12 Features: Two-way sound reinforcement enclosure 12” heavy-duty woofer with 2 3/8” voice coil & 50 oz. magnet RX 14 compression driver, with 1.4 inch titanium diaphragm 400W program/800W peak power handling Patented Quadratic Throat Waveguide™ technology, 100 by 50 degree coverage Asymmetrical horn aims the sound down 10°, at the audience, not over their heads Crossover network for driver protection and EQ Durable plastic injection-molded trapezoidal enclosure Extra angled section on right side allows floor monitor use Full-coverage heavy-duty perforated steel grilles, with powder coat finish Pole mount molded-In Top, bottom and right side flying point inserts Peavey PVX-12 Specifications: Frequency Range, 1 meter on-axis, swept-sine in half space environment: 48 Hz to 21 kHz Frequency Response, 1 meter on-axis, swept-sine in anechoic environment: 60 Hz to 20 kHz (±3 dB) Usable Low Frequency limit (-10dB point anechoic): 51 Hz Power Rating (program): 400W Peak Power Capacity (peak): 800W Sound Pressure Level, 1 Watt, 1 meter in anechoic environment: 96 dB SPL, (2.83V input) Maximum Sound Pressure Level (1 meter): 119 dB SPL continuous 125 dB SPL peak Radiation Angle measured at -6dB point of polar response: Nominal: 100° horizontal X 50° vertical (Axis of the vertical main polar lobe is angled down 10°, resulting in the angular pattern with respect to straight ahead being +15, -35°) Transducer Complement:Heavy-duty 12” woofer with 2 3/8” voice coil & 50 oz. magnet RX™14 1.4” titanium diaphragm dynamic compression driver Box Tuning Frequency: 62 Hz Crossover Frequency (internal passive): 2.8 kHz Impedance (Z) Nominal: 8.0 Ω Minimum: 6.7 Ω Input Connections One four-pin twist-lock connector paralleled with a 1/4” phone jack Enclosure Materials & Finish: Black ABS plastic with textured surface, black powder-coated perforated grille. Mounting provisions: Unit has two sets of two M10 inserts, one pair on the top, and one pair on the bottom. Additional mounting points are a set of four M8 inserts on the top, and a set of four on the right side in the handle recess, and a set of four on the bottom, which use thePeavey VersaMount™ 70+ mounting bracket. Four rubber feet provide vibration free floor or stage use, and a molded-in stand mounting cup is on the bottom. Dimensions (H x W x D) Front: 24.50 in. x 16.10 in. x 15.00 in., 622 mm x 409 mm x 381 mm Rear: 22.75 in. x 8.75 in. x 15.00 in., 578 mm x 222 mm x 381 mm Net Weight: 37 Lbs. (16.8 kg)