1990 Fourwinns 170

1990 fourwinns freedom 170 17’ bowrider 2.3l 4cylinder ford/omc cobra stern drive Has brand new impeller, water intake hose, just converted to pentonix electronic ignition (set up to work with the ESA) Brandnew marine battery Brandnew captain and first mate swivel chairs Rear seat recovered and strong supports made for them with 1” form board (water resistant) Upholstery in decent shape Perfect propeller All bellows are in good shape Gimbal bearing inspected and good shape (greased last month) Universal joints greased Lower gear oil replaced New gasket between outdrive and gimbal bearing housing along with water intake gasket Navigation lights and anchor light, dash lights, radio, horn, bigle pump, and blower all in good working order Fuel gauge doesn’t work 55-60 pounds oil pressure at idle Trim works but leaks slowly (needs 2 gaskets) Trailer in excellent condition (fourwinns matching trailer) has brand new lights and wiring 4pin. 2” ball, grease buddy bearings, tires in great shape Boat comes with ownerships for both boat and trailer Had the boat out over the august long weekend at the cottage, worked well, noticed that the bilge pump was kicking on every hour and half sitting at the dock pumping about 2 litres out, upon inspection the stern of the boat was leaking a bit around the lower of the gimbal bearing housing. After returning home I filled the bilge with water and the lower transom was slowly leaking. Has a soft spot in the floor between seat, used to have a storage compartment there I believe but was converted up when new carpet went in I think they used too thin of plywood (easy fix with a piece of aluminum) Asking 2000 OBO