For sale a Wood Basement Garage Man Cave Cabinet With Three Soft Closing Slides On The Top Drawers.
The rest off the drawers have heavy duty roller bearing slides that the cabinet makers use.
Just the drawer slides were over $100 not including the custom made drawers.
On the left side it was designed to have only two drawers so you could put taller items in the buttom drawer.
It comes with the removable top, that is made of two pieces glued together, but they are starting to come apart on one side.
You can reglue them if you want.
All the drawers come out, to make it a bit lighter for moving it around, if need be.
First $150 takes it.
This is a heavy unit and you will need at least three to four people to move it.
It's too big for my purpose.
It was designed with a lip on the back to store planks or plywood.
It's not perfect but it does the job.
The measurements are as follows:
The base only:
-48 inches wide
-27.5 inches deep
-6 inches high/tall.
The drawers top part with the cabinets is sticking over the edge of the base about 2 inches.
The top section measurements are as follows:
-48.5 inches wide
-30 inches tall
-24 inches deep
The top part, the lid/covers measurements are as follows:
-49 3/4 inches wide/long
-32 1/4 inches deep
-1 3/8 inches thick and it has a roud hole at one end at the back, on the right hand side for a pipe to go through it.
Call George at Chifor Racing at 519-969-8743.
