This listing is for REPAIR SERVICE of your broken Thrustmaster/Guillemot HOTAS Warthog Throttle MAIN PCB (with or without USB cable). If your Warthog Throttle is "bricked" and Windows can't recognize the device, you need a replacement PCB or to have your PCB repaired. This repair features a new CPU which will make it perform at least as long as a new unit from TM.
New this typically costs $75 USD+ from Thrustmaster after shipping and VAT charges.
If you are not in the Ottawa area:
You ship the PCB to me in Ottawa Canada at your own cost. Tracked mail is best. I don't care how it gets here, as long as it does without duties/brokerage.
I repair the PCB, replace the CPU and program it and calibrate/test.
If you ship/bring it in without a USB cable I will send it back without a USB cable. Unless you make special arrangements with me before hand.
Repair time is usually 1 business day.
Symptoms which usually require PCB replacement/repair:
1. You plug in the throttle to USB port and it flashes the LED's briefly on/off.
2. The device is not recognized in Windows Device Manager (red X), popup when plugging in.
3. You can not enter Bulk mode to flash the throttle.
4. In Bulk mode you are unable to flash the throttle as you get an error during flashing.
5. When you plug in the throttle to USB port nothing happens.
Simple replacement which requires unscrewing base (5 screws) and the board (4 screws) and detaching/reattaching 8 connectors. One connector is on bottom of PCB where you need to pay attention to align the pins.
Three months warranty from me.
SEE MY OTHER WARTHOG LISTINGS (or ask):
Bricked Stick Repair 233139273418
HAT Assemblies (MAIL IN upgrade) 233514634768
Push Buttons (MAIL IN upgrade) 233514516264
Pinky Switch (upgrade, soldering required) 233190636530
Replacement Trigger Switches (upgrade, soldering required) 233514716418
Willing to ship the item
Offers curbside pick up
Offers cashless payment
