Toro R Tek engine ring gear & electric starter - needs pinion

** pls read entire ad description b4 replying ** toro power clear snowblower r tek briggs Selling a flywheel ring gear and working 120v electric starter motor & push button module off a 2 stroke Briggs & Stratton R Tek engine that was on a Toro Power Clear single stage snowblower. The starter (model # 801410) works fine, but will need a new pinion (starter gear) cuz the dumbaxx who owned it always started the engine of his PC 38584 with the auger lever depressed (as if it was a lawnmower bail/brake lever) and kept using the starter after the brass pinion & aluminum flywheel ring gear no longed meshed properly. Last time I checked, they still sold aftermarket pinion kits, tho the OEM one was discontinued/is no longer available new (NLA). Asking a firm $60 for the starter - new OEM ones cost well over $300 Cdn. B/c of the above, the teeth of the ring gear are somewhat worn, tho not as much as they may appear - as seen in the last photo, the teeth when new weren't/aren't that pointed to begin with. In any event, the R Tek ring gear and the entire flywheel have been discontinued, so better a worn one than nothing. Asking a firm $50 for the gear. Both include the mounting hardware. Pick up only. Sale is final. Will indicate when one of the above has been sold and delete the ad once both are gone. Will also trade EITHER of the above for ONE of the following in good working condition (except for the saw) OR BOTH for TWO of the following: - a pair of folding aluminum ramps strong enough to load, say, a large snowblower - a set of extra long handle imperial size wrenches with a "box" on one side from 1/4" to 3/4" - a roofing type propane torch with a trigger on the handle and a good hose with fitting for a 20 lb tank - a good quality, click type torque wrench that measures 20 ft-lbs (240 in-lbs) AND UNDER - a good quality (and clean!) 5 to 8 gallon Shop Vac with hose & attachments - a good condition, decent quality 1" diameter shaft polesaw or articulating hedgetrimmer or leaf blower attachment compatible with Ryobi, Troy Bilt, Craftsman, Yardworks, etc 2 or 4 stroke, electric, or cordless "expand it" type (trimmer) powerheads - a working or not Homelite Super 2 SL chainsaw - must have an undamaged engine (cylinder, etc) & brake, decent spark, and all its parts in undamaged condition - a good condition 24" or larger plastic drop spreader - NOT interested in a metal one nor the rotary type - an air hammer accessory set comprised of both "auto body" & punch type attachments - a decent quality slide hammer kit Pls do not offer me anything that isn't listed above ... unless it happens to be a good condition, rolling, hydraulic scissor lift cart of at least 300 lb capacity and minimum 24" lift height, which I will accept for both the gear & the starter ;)