Sansui 200 Vintage Solid-State AM/FM Stereo Tuner Amplifier

Sansui 200 Vintage Solid-State AM/FM Stereo Tuner Amplifier (1971) for sale Specifications: Audio Section Music Power Output (IHF): 17 W at 4 Ω; 14 at 8 Ω Continuous Power Output (each channel): 6,5/6,5 W at 4 Ω; 5/5 W at 8 Ω Total Harmonic Distortion: less than 1% at rated output Power Bandwidth (IHF): 30 to 25,000 Hz (at 8 Ω load) Frequency Response (at normal listening level): Aux over all : 25 to 30,000 Hz ±2 dB Channel Separation (at 1 kHz rated output): Phono : better than 40 dB Aux : better than 45 dB Hum and Noise (IHF): Phono : better than 65 dB Aux : better than 70 dB Input Sensitivity (at 1 kHz rated output): Phono : 3 mV/ 50 k Ω Aux : 180 mV/ 100 k Ω Tape Mon (PIN) : 180 mV/ 100 k Ω Tape recorder (DIN) : 180 mV/ 100 k Ω Recording Output: Tape Rec (PIN): 180 mV Tape Recorder (DIN): 30 mV Load Impedance: 4 to 16 Ω Damping Factor: 20 at 8 Ω load Equalizer Phono: RIAA, NF type Tone Controls: Bass : ±10 dB at 50 Hz Treble : ±8 dB at 10 kHz Loudness Control (volume control at -30 dB): +8 dB at 50 Hz ; +3 dB at 10 kHz Switches Selector : Phono; FM Auto; AM; Aux Tape Monitor : Off, On Mode : Stereo, Mono Other Special Features: DIN Connector for Tape Recorder, Direct Tape Monitor,Head Phone jack. FM Tuner Section Tuning Range: 88 to 108 MHz Sensitivity: 20 dB quieting : 2,5 µV IHF : 3 µV Harmonic Distortion: less than 1% Signal-to-Noise ratio: better than 50 dB Selectivity: better than 35 dB at 98 MHz Capture ratio (IHF): 3 dB Image Frequency Rejection: better than 45 dB at 98 MHz IF Rejection: better than 65 dB at 98 MHz Spurious Response Rejection: better than 65 dB at 98 MHz Spurious Radiation: less than 34 dB Antenna Input Impedance: 300 Ω balanced FM Stereo Separation: better than 30 dB at 400 Hz AM Tuner Section Tuning Range: 535 to 1605 kHz Sensitivity: 51 dB/m at 1 kHz (bar antenna) Image Frequency Rejection: better than 30 dB at 1 kHz IF rejection: better than 45 dB Selectivity: better than 20 dB Other Special Features: FM Linear Scale Dial; Signal Strength Meter; Fly -wheel Tuning; AM ferrite Bar Antenna; FM Stereo Auto; FM SCA Filter Semiconductors: 29 Transistors; 1 FET; 2 Varistors; 14 Diodes. Power Requirement: 100,110,117,127,220,230, 240, 250 V 50/60 Hz Power Consumption: 45 VA (max signal) Dimensions (W x H x D): 15-7/8" x 4-9/16" x 11-1/16" Weight: 13,2 lbsMade in Japan Good working and shape conditions. Some controls makes sound scratches Only Signal Strength Meter doesn’t light(bulb($1.5-$5) needs to be changed) If you see this ad means it is available Asking: $300 Feel free to call me with your reasonable offer Call: (647)588-3353