Vintage JVC 4VR-5426X 4 Channel Receiver 160 Watts
Description
-Please read the entire ad description -do not contact me unless you read full ad description -if you see the ad, item is available -price is FIRM for the unit, i do not take offers -item will be tested for you prior to purchase -i am not an electronic technician. i do not repair electronics. -low ballers will politely be ignored and blocked -be sure to check out my other ad for good used electronics
here i am offering a nice Vintage JVC 4VR-5426X 4 Channel Receiver 160 Watts i opened inside to blow all the dust out with a air compressor. cleaned the pots and switches with contact cleaner. most of my electronics have not been used for 15+ years. super clean inside and outside.
couple of barely noticeable superficial scratches on top otherwise receiver is in beautiful shape. this is probably the cleanest you can find. all bulbs are original inside
functionality, it works EXCELLENT. i tested everything function on the receiver. everything works like it should. CD-4 works great. the only problem i noticed the CD-4 light bulb does not lid up. i am not sure if the bulb is burned out there is trick to it but cd-4 works great with all 4 speakers. cd-4 is designed to be used with phono only. with other functions you will use 2 channel.
this is big and heavy receiver. be sure to check out the measurement
PRICE IS $450
Specifications Tuning range: FM, MW Power output: 30W/ch (stereo), 13W/ch into 8Ω (quadraphonic) Frequency response: 20Hz to 30kHz Total harmonic distortion: 1% Damping factor: 30 Input sensitivity: 1.5mV (MM), 200mV (line) Signal to noise ratio: 65dB (MM), 75dB (line) Output: 200mV (line) Speaker load impedance: 4Ω to 16Ω Dimensions: 163 x 476 x 391mm Weight: 12.2kg