Sanni Cart Reader V3 PCBs and parts

$10
Posted
Kelowna, BC V1V 1A5(View Map)

Description

Local pickup only, no shipping.

I have a few extra PCBs and components available to build a V3 Sanni Cartridge Reader: save some $$ and build one cheaper.

Listed below are the parts included for sale, plus a list of the remaining needed items.

INFO: The Sanni Cartridge Reader DIY Cartridge Reader/Dumper which uses the Arduino Mega 2560. For dumping SNES, Genesis, GB/GBC/GBA, N64, game ROM and save data. Supports other consoles like the NES, Famicom, and Master System thru adapters.

More details / full build instructions found here: https://github.com/sanni/cartreader/wiki/Needed-Parts =================================== INCLUDED parts: - Cart Reader PCB - NES to SNES adapter PCB - Famicom to SNES adapter PCB - LED - Male-Female pin headers (1x 6pin + 1x 7pin, for the clock gen and SD slot) - Male-Male pin headers (for the Arduino) - Buttons - 3.3V Voltage regulator - 100nf ceramic capacitor - 220 ohm resistors - 1k resistors - 10k resistors

===================================== Parts YOU would need to still get: - PIC microcontroller flashed with SNES CIC code - 22uf tantalum capacitor - 470uF capacitor - Toggle switches - OLED display - Micro SD slot - Clock module - Arduino Mega - Cartridge slots for SNES, Genesis, N64, GB - Cartridge slots for NES + Famicom (For the adapters) - 3D-printed case, screws

Owner
1 listing
--
avg reply
--
reply rate
--
on Kijiji
Take steps to make your Kijiji transactions as secure as possible by following our suggested safety tips. Read our Safety Tips