"milling machine" in Buy & Sell in Alberta
Results 1 - 40 of 164
Filters
Location
Price
Offer type
For Sale By
Results 1 - 40 of 164
Please Contact
King Wood / Metal Shop Tools, Various Prices
Southwest Calgary
1. King Milling drilling machines 12 speeds, 1 1/4 in drilling capacity (retail $4128, sell $2500) plus stand (retail $400, sell $200), 2. King 10 in x 22 in Metal lathe (retail $3000, sell $2500) ...
$1,600.00
Bench top Milling Machine with DRO
Calgary
King KC-15VS Benchtop milling machine. 3/4HP R8 spindle. - ToAuto 5-micron glass scale digital readout for X,Y,Z axis. - LMS belt drive conversion kit. - LMS pneumatic column spring conversion kit ...
$6,500.00
Cat Cold Planer Attachment
Medicine Hat
Skidsteer Cold Planer Attachment 16 inch cutting width side shift and tilt Perfect low flow attachment Some new replacement teeth and holders to go with Reason for selling Retirement Used for some ...
$2,300.00
Round column milling machine
Calgary
Round column milling machine for sale, same as the king they sell today but has more “z” height. Older machine little ugly but still tight. Comes with vise and stand. Currently on sale for 2800$ plus ...
$3,000.00
Metal lath and milling machine
Calgary
Maximat metal milling lath with acc. And bench phone Bill at 403 818 9845
$109.98
Wilson Staff Model Wedge Left Hand 56 degrees only
Canada
Shipping by sellerWILSON STAFF MODEL WEDGE Delivering short-game confidence and long-term reliability. The soft-forged carbon steel heads and precision-milled face are just two of the game-enhancing features that our pro players said they looked for in a wedge. One swing, and you’ll understand why. TOUR INSPIRED. TOUR PROVEN The
Shipping by seller$70.00
Metal lathe milling machine tooling
Northwest Edmonton
Southbend Lathe parts Read the entire ad........Fully and Completely............... Before responding ........... Local pick-up only Boxes of misc priced for each part ...
Please Contact
Horizontal boring mill & milling machine support tailstock stay
Edmonton
Horizontal boring mill & milling machine support tailstock stay probably European Dimensions(Approximate): From ways to top of column: 62" From outside of way to other way: 30" Ways width: 5.25" or ...
$3,000.00
Electric milling machine
Lloydminster
Heavy duty milling machine/drill press. 3 phase electric motor with a single phase inverter. Works very well. The inverter gives variable speed function, can run it very slowly or very fast or any ...
$45.00
NEW Metcut 1" Back/Spot face BF cutter with 1/2" pin drive shaft
Southeast Calgary
NEW Metcut 1" Backspot/Spotface BF milling cutter with 1/2" pin drive shaft pilot Used to cleanly machine (face) surface after holes are drilled to ensure no raised edges - especially good in tight ...
$37.00
Metcut 1/2" Back/Spot face BF cutter w/5/16" pin drive shaft
Southeast Calgary
Metcut Metcut 1/2" Backspot/Spotface cutter with 5/16" pin drive shaft pilot Used to cleanly machine (face) surface after holes are drilled to ensure no raised edges - especially good in tight ...
$120.00
cutter for milling mackine aprox 13/4 inch 120 dollars
Edmonton
millig machine cutter aprox 1 5 inch 120 dollars tx 7785352735 will deliver
$24,950.00
125 KVA - Cummins 5.9L - Diesel Generator - 120/240 - 208 Volt
Alberta
Shipping by sellerCummins5.9L - Diesel Generator - 125KVA 120/240 - 208 Volt 208 Volt 3 phase 120-240 Volt Single phase 7 foot narrow shack with sliding side doors. 3000 Litre fuel tank mounted on skid. Incredibly solid machine, with a great motor. Has never given us ANY issues. The machine can also be converted for 480 or 600
Shipping by seller$2,500.00
Metal Lathe
Calgary
For sale is a pinko LAM-350AH. I don't know much about lathes but I think it's a 12"x36". Heavy as hell, you will need to bring an engine hoist or more to lift it. I'm honestly not sure on the price ...
$15.00
Dust Cleaning Nylon Brush for CNC Router Spindle Motor Milling M
Edmonton
Dust Cleaning Nylon Brush for CNC Router Spindle Motor Milling Machine. I have 2 rolls of 4 inch by 36 inch. Use this for the dust collection boot. If the Ad is up then it is still available. If ...
Please Contact
Yama Seiki GTZ-2600Y Multi-Axis CNC Turning Center with Milling
Edmonton
Specifications (subject to buyer verification): X-Axis Travel: 7.67 Y-Axis Travel: 3.93 Z-Axis Travel: 24.4 Spindle Bore: 2.99 Bar Capacity: 2.55 Spindle Nose: A2-6 Spindle Motor: 20HP Sub Spindle ...
$100.00
2 - Axis Cross Slide Vise
Calgary
New in box, 2 - Way cross slide vice for drill press or milling machine. Pickup only, bring cash.
Please Contact
CNC BORING MILL - 4.3" Spindle - #50 Taper
Edmonton
NEW - MAXCUT-CNC BORING MILL - 4.3" Spindle - #50 Taper LEASING AVAILABLE NO MONEY DOWN - DO NOT PAY FOR 90 DAYS OAC MAXCUT CNC Boring and Milling Machine UBM-11020RS With Fagor 8065XP control and ...
$12,000.00
CNC Stone Router
Red Deer
2001 Delta 1003 CNC Router and Cutting Machine. Still under power and being used regularly in our fabrication shop. Used for cutting, router edges, scribing, milling, & coring on granite, quartz & ...
$3,500.00
Precision Combo Lathe Milling Machine 16 1/2" x 31 1/8" NEW
Morinville
New Precision Combo Lathe Milling Machine 16 1/2" x 31 1/8", 110V. The machine comes basic without attachment. You can buy the attachments you need. Check in the description for add on. Lathe Full ...
$24,950.00
125 KVA - Cummins 5.9L - Diesel Generator - 120/240 - 208 Volt
Canada
Shipping by sellerCummins 5.9L - Diesel Generator - 125KVA 120/240 - 208 Volt 208 Volt 3 phase 120-240 Volt Single phase 7 foot narrow shack with sliding side doors. 3000 Litre fuel tank mounted on skid. Incredibly solid machine, with a great motor. Has never given us ANY issues. The machine can also be converted for 480 or 600
Shipping by seller$29,900.00
Hecker 400/MCGE
Canada
x-travel 1320 mm y-travel 345 mm z-travel 400 mm table clamping area 1800 x 450 mm max. workpiece weight 1500 kg table swiveling to both sides 45 ° tool taper 50 SK Diameter on front bearing 110 mm blade cutter head diameter 315 mm max. torque milling spindle 1850 Nm speed steps 18 spindle turning speed range
$13,990.00
Yuwe TM250 (1 Phase) Manual Milling Machine | 40 Taper & R8
Canada
Specifications Included Option: X-Axis Power Feed: AC 110V, 90W, 50/60Hz Included Option: Y-Axis Power Feed: AC 110V, 90W, 50/60Hz Working Table: 9" x 42" Working Table Load: 775 lbs Travel X-Axis: 35.5" Travel Y-Axis: 15.8" Travel Z-Axis: 15.8" T-Slot: 0.12" x 0.63" Quill Travel: 5" Quill Ø: 3.45" Quill Feeds
$149.95
NEW 4 IN PRECISION CROSS SLIDE VICE 30110
Red Deer
NEW 4 IN PRECISION CROSS SLIDE VICE 30110 SALE $149.95 This 4 Cross Slide Vise is capable of travelling at two directions. The ja width is 100mm (4). The cross slide vise can travel 140mm at X-axis, and 80mm at Y-axis. This compound sliding vise is well machined with smooth travel. It is a precision model with
$149.95
NEW 4 IN PRECISION CROSS SLIDE VICE 30110
Lloydminster
NEW 4 IN PRECISION CROSS SLIDE VICE 30110 SALE $149.95 This 4 Cross Slide Vise is capable of travelling at two directions. The ja width is 100mm (4). The cross slide vise can travel 140mm at X-axis, and 80mm at Y-axis. This compound sliding vise is well machined with smooth travel. It is a precision model with
$149.95
NEW 4 IN PRECISION CROSS SLIDE VICE 30110
Edmonton
NEW 4 IN PRECISION CROSS SLIDE VICE 30110 SALE $149.95 This 4 Cross Slide Vise is capable of travelling at two directions. The ja width is 100mm (4). The cross slide vise can travel 140mm at X-axis, and 80mm at Y-axis. This compound sliding vise is well machined with smooth travel. It is a precision model with
$149.95
NEW 4 IN PRECISION CROSS SLIDE VICE 30110
Grande Prairie
NEW 4 IN PRECISION CROSS SLIDE VICE 30110 SALE $149.95 This 4 Cross Slide Vise is capable of travelling at two directions. The ja width is 100mm (4). The cross slide vise can travel 140mm at X-axis, and 80mm at Y-axis. This compound sliding vise is well machined with smooth travel. It is a precision model with
$149.95
NEW 4 IN PRECISION CROSS SLIDE VICE 30110
Alberta
NEW 4 IN PRECISION CROSS SLIDE VICE 30110 SALE $149.95 This 4 Cross Slide Vise is capable of travelling at two directions. The ja width is 100mm (4). The cross slide vise can travel 140mm at X-axis, and 80mm at Y-axis. This compound sliding vise is well machined with smooth travel. It is a precision model with
$3,495.00
NEW 32 PORTABLE SAWMILL 14 HP ELECTRIC START LONCIN 1252023
Lloydminster
NEW 32 PORTABLE SAWMILL 14 HP ELECTRIC START LONCIN 1252023 SALE $3495.00 Powered by a 14 HP LONCIN engine which is widely known for its durability, strength, lifespan and reliability Creates a self-sustainable lumber solution for someone who has access to a lot of wood or lives in a heavily forested area; no
$3,495.00
NEW 32 PORTABLE SAWMILL 14 HP ELECTRIC START LONCIN 1252023
Edmonton
NEW 32 PORTABLE SAWMILL 14 HP ELECTRIC START LONCIN 1252023 SALE $3495.00 Powered by a 14 HP LONCIN engine which is widely known for its durability, strength, lifespan and reliability Creates a self-sustainable lumber solution for someone who has access to a lot of wood or lives in a heavily forested area; no
$3,495.00
NEW 32 PORTABLE SAWMILL 14 HP ELECTRIC START LONCIN 1252023
Grande Prairie
NEW 32 PORTABLE SAWMILL 14 HP ELECTRIC START LONCIN 1252023 SALE $3495.00 Powered by a 14 HP LONCIN engine which is widely known for its durability, strength, lifespan and reliability Creates a self-sustainable lumber solution for someone who has access to a lot of wood or lives in a heavily forested area; no
$3,495.00
NEW 32 PORTABLE SAWMILL 14 HP ELECTRIC START LONCIN 1252023
Alberta
NEW 32 PORTABLE SAWMILL 14 HP ELECTRIC START LONCIN 1252023 SALE $3495.00 Powered by a 14 HP LONCIN engine which is widely known for its durability, strength, lifespan and reliability Creates a self-sustainable lumber solution for someone who has access to a lot of wood or lives in a heavily forested area; no
$249.95
NEW 3 AXIS CNC ROUTER ENGRAVING MILLING CARVING MACHINE DKJ3Z30
Lloydminster
NEW 3 AXIS CNC ROUTER ENGRAVING MILLING CARVING MACHINE DKJ3Z30 SALE $249.95 CNC 3018 Router Machine: CNC 3018 PRO is an upgraded version of 3018 CNC. We provide a detailed user manual, assembly instructions, and installation video for your convenience. Assemble the engraver machine according to the installation
$249.95
NEW 3 AXIS CNC ROUTER ENGRAVING MILLING CARVING MACHINE DKJ3Z30
Edmonton
NEW 3 AXIS CNC ROUTER ENGRAVING MILLING CARVING MACHINE DKJ3Z30 SALE $249.95 CNC 3018 Router Machine: CNC 3018 PRO is an upgraded version of 3018 CNC. We provide a detailed user manual, assembly instructions, and installation video for your convenience. Assemble the engraver machine according to the installation
$249.95
NEW 3 AXIS CNC ROUTER ENGRAVING MILLING CARVING MACHINE DKJ3Z30
Grande Prairie
NEW 3 AXIS CNC ROUTER ENGRAVING MILLING CARVING MACHINE DKJ3Z30 SALE $249.95 CNC 3018 Router Machine: CNC 3018 PRO is an upgraded version of 3018 CNC. We provide a detailed user manual, assembly instructions, and installation video for your convenience. Assemble the engraver machine according to the installation
$249.95
NEW 3 AXIS CNC ROUTER ENGRAVING MILLING CARVING MACHINE DKJ3Z30
Alberta
NEW 3 AXIS CNC ROUTER ENGRAVING MILLING CARVING MACHINE DKJ3Z30 SALE $249.95 CNC 3018 Router Machine: CNC 3018 PRO is an upgraded version of 3018 CNC. We provide a detailed user manual, assembly instructions, and installation video for your convenience. Assemble the engraver machine according to the installation
$129.95
NEW GRAIN MILL GRAINDER ELECTRIC 700G COMMERCIAL GRINDING MACHINE HC700
Lloydminster
NEW GRAIN MILL GRAINDER ELECTRIC 700G COMMERCIAL GRINDING MACHINE HC700 SALE $129.95 EA SAFER DESIGN FOR RELIEVED USE – Our electric grinder is equipped with a safety buckle device on the both sides of lid, that is if you open the lid during grinding, the machine will stop working immediately to avoid injury.
$129.95
NEW GRAIN MILL GRAINDER ELECTRIC 700G COMMERCIAL GRINDING MACHINE HC700
Edmonton
NEW GRAIN MILL GRAINDER ELECTRIC 700G COMMERCIAL GRINDING MACHINE HC700 SALE $129.95 EA SAFER DESIGN FOR RELIEVED USE – Our electric grinder is equipped with a safety buckle device on the both sides of lid, that is if you open the lid during grinding, the machine will stop working immediately to avoid injury.
$129.95
NEW GRAIN MILL GRAINDER ELECTRIC 700G COMMERCIAL GRINDING MACHINE HC700
Grande Prairie
NEW GRAIN MILL GRAINDER ELECTRIC 700G COMMERCIAL GRINDING MACHINE HC700 SALE $129.95 EA SAFER DESIGN FOR RELIEVED USE – Our electric grinder is equipped with a safety buckle device on the both sides of lid, that is if you open the lid during grinding, the machine will stop working immediately to avoid injury.
$129.95
NEW GRAIN MILL GRAINDER ELECTRIC 700G COMMERCIAL GRINDING MACHINE HC700
Alberta
NEW GRAIN MILL GRAINDER ELECTRIC 700G COMMERCIAL GRINDING MACHINE HC700 SALE $129.95 EA SAFER DESIGN FOR RELIEVED USE – Our electric grinder is equipped with a safety buckle device on the both sides of lid, that is if you open the lid during grinding, the machine will stop working immediately to avoid injury.
Browse other categories in Classifieds in Alberta
Browse Buy & Sell by location