"lathe lathes" in Buy & Sell in Kingston Area - Page 3

Results 81 - 120 of 160

Filters

Category

Buy & Sell

Price

Results 81 - 120 of 160

    • -TOUR À FER NEUF / LATHE / ZMM CU400M 17'' (BULGARIE)

      Please Contact

      -TOUR À FER NEUF / LATHE / ZMM CU400M 17'' (BULGARIE)

      Canada

      No de produit : NFZMM-CU400M Marque : ZMM BULGARIA/SOFIA Modèle : CU400M Capacité : SWING 17'' Longueur Travail : De 40'' Ã 196'' Vitesse : 20 ~ 200 RPM Moteur : 10 HP Voltage : 575V / 3PH Poids : 6400 LB (80'') CARACTÉRISTIQUES : **FABRIQUÉ EN EUROPE DE L'EST DEPUIS 60 ANS, SANS AUCUN DOUTE LE MEILLEUR TOUR À

    • -TOUR À FER NEUF / LATHE ZMM C11MT 24'' (BULGARIE)

      Please Contact

      -TOUR À FER NEUF / LATHE ZMM C11MT 24'' (BULGARIE)

      Canada

      ENGLISH WEBSITE LINK: http://www.soudogaz.com/en/product/zmm-c11mt-24/ No de produit : NFZMM-C11MT Marque : ZMM BULGARIA/SOFIA Modèle : C11MT Capacité : SWING 24'' Longueur Travail : De 40'' Ã 196'' Vitesse : 11.5 ~ 2000 RPM Moteur : 10 HP Voltage : 575V / 3PH Poids : 6850 LB (80'') Caractéristiques : **FABRIQUÉ

    • -TOUR À FER NEUF / LATHE ZMM C10T.10 32'' (BULGARIE)

      Please Contact

      -TOUR À FER NEUF / LATHE ZMM C10T.10 32'' (BULGARIE)

      Canada

      No de produit : NFZMM-C10T.10 Marque : ZMM BULGARIA / SOPHIA Modèle : C10T.10 Type : CONVENTIONNEL Capacité : 32'' Longueur Travail : 60'' ~ 236'' Vitesse : 8~400 rpm Moteur : 20 HP Voltage : 575 / 60hz / 3 ph Poids : 10,600LB (120'') CARACTÉRISTIQUES : **FABRIQUÉ EN EUROPE DE L'EST DEPUIS 60 ANS, SANS AUCUN DOUTE

    • -MACHINE OUTILS: TOUR /CISAILLE /FERRAILLEUSE / PRESSE-PLIEUSE / SCIE / CINTREUSE/ ROULEAU À PLAQUE /FRAISEUSE /PERCEUSE

      Please Contact

      -MACHINE OUTILS: TOUR /CISAILLE /FERRAILLEUSE / PRESSE-PLIEUSE / SCIE / CINTREUSE/ ROULEAU À PLAQUE /FRAISEUSE /PERCEUSE

      Canada

      Machinerie Soudogaz Grâce à notre inventaire de plus 5 millions de dollars, nous sommes tout désigné pour combler vos besoins en matière d’équipement professionnel NEUF et USAGÉ . Nous sommes fiers d'avoir à votre disposition, plus de 250 produits et machines de toute sorte. Nous avons un vaste choix de machi

    • Lathe chuck 16” 4 jaw, 4” thick, 4” hole thru, bolt on mount

      $485.85

      Lathe chuck 16” 4 jaw, 4” thick, 4” hole thru, bolt on mount

      Canada

      Shipping by seller

      Lathe chuck 16” 4 jaw, 4” thick, 4” hole thru, bolt on mount. Located Colborne.

      Shipping by seller
    • Mazak QTN-200-II Turning Center

      Please Contact

      Mazak QTN-200-II Turning Center

      Canada

      Shipping by seller

      Achieve peak performance in your machining processes with the Mazak Turning Center Lathe, specifically engineered for high efficiency and precision. This superior lathe offers an array of advanced features like a chip conveyor for effective chip management, a coolant tank for improved tool lifespan, and a tool

      Shipping by seller
    • Lathe Faceplate, 17-3/4” dia., 5” hole thru, d18 camlock

      $329.49

      Lathe Faceplate, 17-3/4” dia., 5” hole thru, d18 camlock

      Canada

      Shipping by seller

      Lathe Faceplate, 17-3/4” dia., 5” hole thru, d18 camlock, 2-1/8” thick, (8) 3/4” x 2” slots. Colborne Ontario

      Shipping by seller
    • Lathe steady rest 5” capacity 11” centre height

      $395.00

      Lathe steady rest 5” capacity 11” centre height

      Canada

      Shipping by seller

      Lathe steady rest 5” capacity 11” centre height, frame 3-1/2” thick, base 8-1/2” wide, 11” centre height, 3 point bronze ends, 19” x 17” x 3-1/2” thick Located Colborne, Ontario

      Shipping by seller
    • Lathe chuck, 4 jaw 23-1/2, hole thru 4, thickness 5 no back plate

      $495.00

      Lathe chuck, 4 jaw 23-1/2, hole thru 4, thickness 5 no back plate

      Canada

      Shipping by seller

      Lathe chuck, 4 jaw 12" dia, 3" hole thru,, 3-1/2" thick. D1-6 spindle mount. good condition. Colborne Ontario

      Shipping by seller
    • Lathe 4 way tool posts 5-1/4” sq 4-3/4” sq 4” sq

      $175.00

      Lathe 4 way tool posts 5-1/4” sq 4-3/4” sq 4” sq

      Ontario

      Shipping by seller

      4 way tool post .. 5-1/4” x 5-1/4”x 3” high, 3/4” x 1-1/2” high slot, 12 bolts, o.a. Height 6” .. $195.00 4 way tool post.. 4-3/4” x 4-3/4” x 3-1/8” high, slot 3/4” x 1-1/2”, 6” high OA height, 12 bolts. $175.00 4” x 4” x 3” high, slot 3/4” x 1-1/4”, 4-1/2” OA height, 12 bolts $175.00

      Shipping by seller
    • Lathe follow rest, 4-3/4” capacity, 3 pt, base 16” x 2-3/4” x 28” high

      $369.95

      Lathe follow rest, 4-3/4” capacity, 3 pt, base 16” x 2-3/4” x 28” high

      Ontario

      Shipping by seller

      Lathe follow rest, 4-3/4” capacity, 3 pt, base 16” x 2-3/4” x 28” high

      Shipping by seller
    • Faceplate for lathe, 20” dia., D18 Spindle mount, 8 slots with (4 )7/8” t slots

      $359.99

      Faceplate for lathe, 20” dia., D18 Spindle mount, 8 slots with (4 )7/8” t slots

      Ontario

      Shipping by seller

      Faceplate for lathe, 20” dia., D18 Spindle mount, 8 slots with (4 )7/8” t slots, 4” thick

      Shipping by seller
    • Lathe 8.5 in 3 jaw chuck, 2.5 hole thru, 3-1/2 thick, flat back

      $195.00

      Lathe 8.5 in 3 jaw chuck, 2.5 hole thru, 3-1/2 thick, flat back

      Ontario

      Shipping by seller

      Lathe 8.5 in 3 jaw chuck, 2.5" hole thru, 3-1/2 " thick, flat back. Located Colborne, Ontario

      Shipping by seller
    • Lathe chuck, 16 inch 4 jaw, 4 inch thick, bolt spindle mount

      $495.99

      Lathe chuck, 16 inch 4 jaw, 4 inch thick, bolt spindle mount

      Ontario

      Shipping by seller

      Lathe chuck, 16 inch 4 jaw, 4 inch thick, bolt on spindle mount, 4-3/4” c/c bolt ( 6-3/4” diagonal c/c)

      Shipping by seller
    • 12” diameter 3jaw chuck, 4” hole thru 4-7/8” thick, D16 mount

      $575.85

      12” diameter 3jaw chuck, 4” hole thru 4-7/8” thick, D16 mount

      Ontario

      Shipping by seller

      12” dia. 3 jaw lathe chuck, Gisholt USA, 4-7/8” thick, 4” hole through, 7/8” dia camlock pins, D16 mount, good condition.

      Shipping by seller
    • lathe chuck 12 inch 4 jaw, 3-1/2” thick, bolt on spindle mount

      $395.99

      lathe chuck 12 inch 4 jaw, 3-1/2” thick, bolt on spindle mount

      Ontario

      Shipping by seller

      lathe chuck 12 inch 4 jaw, 3-1/2” thick, bolt on spindle mount, 2-7/8” hole through, bolt distance c/c 3-3/4 inch diagonal bolt c/c 5-1/4 inch Colborne, Ontario

      Shipping by seller
    • ICOCA 26 In. x 80 In. Engine Lathe SJ-2680G

      $10,000.00

      ICOCA 26 In. x 80 In. Engine Lathe SJ-2680G

      Canada

      SKU: 120533 Model: SJ-2680G Year: 1992 Condition: Used S/N: 871234 General Specifications: Horsepower: 20 hp Distance Between Centres: 80 " Swing Over Ways: 26 " Bore Diameter: 3.125 " Electrical Specifications: Voltage: 220 volts Phase: 3-phase Dimensions: 60.00 (H) x 45.00 (W) x 100.00 (L) inches For more i

    • OKUMA 60/50HP CNC Lathe LOC650

      $264,000.00

      OKUMA 60/50HP CNC Lathe LOC650

      Canada

      SKU: 120176 Model: LOC650 Year: 2003 Condition: Used S/N: 124827 General Specifications: Horsepower: 60 hp Distance Between Centres: 68.90 " Electrical Specifications: Voltage: 480 volts Phase: 3-phase Made In: JAPAN Dimensions: 112.00 (H) x 278.00 (W) x 124.00 (L) inches Additional Description: [OKUMA LOC650

    • OKUMA 60/50HP LOC650 CNC Lathe Package w/ Custom Threading Line

      $559,000.00

      OKUMA 60/50HP LOC650 CNC Lathe Package w/ Custom Threading Line

      Canada

      SKU: 120178 Model: LOC650 Year: 2003 Condition: Used S/N: 124827 General Specifications: Horsepower: 60 hp Distance Between Centres: 68.90 " Electrical Specifications: Voltage: 480 volts Phase: 3-phase Dimensions: 112.00 (H) x 118.00 (W) x 393.00 (L) inches Additional Description: [OKUMA LOC650 & Custom Threading

    • TAKANG 30 In. x 120 In. CNC Lathe TNC770AX3000

      $129,000.00

      TAKANG 30 In. x 120 In. CNC Lathe TNC770AX3000

      Canada

      SKU: 120109 Model: TNC770AX3000 Year: 2012 Condition: Used S/N: B4122692S General Specifications: Distance Between Centres: 120 " Swing Over Ways: 18.5 " Swing Over Carriage: 30 " Bore Diameter: 6 " Steady Rest: Yes Electrical Specifications: Voltage: 380 volts Phase: 3-phase Additional Description: Bed Width:

    • LODGE & SHIPLEY 16 In. x 21 In. Lathe w/ Tooling & Accessories

      $4,500.00

      LODGE & SHIPLEY 16 In. x 21 In. Lathe w/ Tooling & Accessories

      Canada

      SKU: 118403 Condition: Used General Specifications: Distance Between Centres: 21 " Swing Over Ways: 16 " Swing Over Carriage: 14 " Bore Diameter: 2 " Electrical Specifications: Voltage: 575 volts Phase: 3-phase Dimensions: 77.00 (H) x 49.00 (W) x 103.00 (L) inches For more information, please contact us at: Lenmark

    • KIRIU Turret Lathe LS3

      $4,500.00

      KIRIU Turret Lathe LS3

      Canada

      SKU: 54769 Model: LS3 Condition: Used S/N: 2183 General Specifications: Horsepower: 2 hp Distance Between Centres: 11.8 " Swing Over Ways: 20 " Swing Over Carriage: 16 " Bore Diameter: 2.125 " Electrical Specifications: Voltage: 220 volts Phase: 3-phase Made In: JAPAN Dimensions: 66.10 (H) x 51.20 (W) x 106.30

    • MAZAK 2032 x 457 HERCULES Lathe

      $9,900.00

      MAZAK 2032 x 457 HERCULES Lathe

      Canada

      SKU: 18011 Model: Ajax 18 Condition: Used S/N: 3099 General Specifications: Bore Diameter: 3" " Dimensions: 43.00 (H) x 52.00 (W) x 132.00 (L) inches Additional Description: Bed length: 80" Swing in-gap: 25.5" Swing over Bed: 18" Notes: this item also includes a 3-jaw chuck, a steady rest, and additional tooling.

    • OKUMA 21 In. x 59 In. LS Engine Lathe

      $6,000.00

      OKUMA 21 In. x 59 In. LS Engine Lathe

      Canada

      SKU: 117831 Model: LS Condition: Used S/N: 4102-9313 General Specifications: Horsepower: 10.2 hp Distance Between Centres: 59 " Swing Over Ways: 21 " Electrical Specifications: Voltage: 220/440 volts Phase: 3-phase Additional Description: Speed: 38 - 2000 rpm For more information, please contact us at: Lenmark

    • CITIZEN MACHINERY CNC Swiss Lathe Cincom L16-3M7 w/ 20' Bar Feeder

      $4,000.00

      CITIZEN MACHINERY CNC Swiss Lathe Cincom L16-3M7 w/ 20' Bar Feeder

      Canada

      SKU: 118281 Model: L16-3M7 Year: 1995 Condition: Used General Specifications: Horsepower: 3 hp Electrical Specifications: Voltage: 200 volts Phase: 3-phase Additional Description: Features: - Dual spindle - Live cross tools - Mitsubishi Meldas control - Bar feeder LNS Mini Sprint 20 ft. bar Max. Bar Diameter:

    • Lathe Chuck Top Jaws 3-3/4 In. x 2-1/4 In. x 1 In. Set of 3

      $200.00

      Lathe Chuck Top Jaws 3-3/4 In. x 2-1/4 In. x 1 In. Set of 3

      Canada

      SKU: 31306 Condition: Surplus New General Specifications: Lathe Type: Chuck Dimensions: 1.00 (H) x 2.25 (W) x 3.75 (L) inches Additional Description: Set of 3 For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC V4W 4A9 Phone: 604.449.1880 Email: sales@lenmark.com View

    • Lathe Chuck Top Jaws 3-1/2 In. x 2-1/2 In. x 1-1/4 In. Set of 4

      $150.00

      Lathe Chuck Top Jaws 3-1/2 In. x 2-1/2 In. x 1-1/4 In. Set of 4

      Canada

      SKU: 31305 Condition: Used General Specifications: Lathe Type: Chuck Dimensions: 1.25 (H) x 2.50 (W) x 3.50 (L) inches Additional Description: Set of 4 For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC V4W 4A9 Phone: 604.449.1880 Email: sales@lenmark.com View more products

    • Lathe Chuck Hard Top Jaws 4-1/4 In. x 2 In. x 1-1/2 In. Set of 4

      $360.00

      Lathe Chuck Hard Top Jaws 4-1/4 In. x 2 In. x 1-1/2 In. Set of 4

      Canada

      SKU: 31304 Condition: Surplus New General Specifications: Lathe Type: Chuck Dimensions: 1.50 (H) x 2.00 (W) x 4.50 (L) inches Additional Description: Set of 4 For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC V4W 4A9 Phone: 604.449.1880 Email: sales@lenmark.com View

    • KING CANADA 12 In. x 36 In. Gearhead Metal Lathe w/ Stand No. KC-1236ML/SS-1236

      $5,999.00

      KING CANADA 12 In. x 36 In. Gearhead Metal Lathe w/ Stand No. KC-1236ML/SS-1236

      Canada

      SKU: 61280 Model: KC-1236ML/SS-1236 Condition: New General Specifications: Horsepower: 1.5 hp Distance Between Centres: 36 " Swing Over Ways: 12 " Swing Over Carriage: 7.25 " Electrical Specifications: Voltage: 220 volts Phase: Single-phase Dimensions: 28.00 (H) x 28.00 (W) x 65.00 (L) inches Additional Description:

    • KING CANADA 12 In. x 36 In. Gearhead Metal Lathe w/ Taper Attachment No. KC-1236ML/KM-053/SS-1236

      $6,499.00

      KING CANADA 12 In. x 36 In. Gearhead Metal Lathe w/ Taper Attachment No. KC-1236ML/KM-053/SS-1236

      Canada

      SKU: 61279 Model: KC-1236ML/KM-053/SS-1236 Condition: New General Specifications: Horsepower: 1.5 hp Distance Between Centres: 36 " Electrical Specifications: Voltage: 220 volts Phase: Single-phase Dimensions: 28.00 (H) x 28.00 (W) x 65.00 (L) inches Additional Description: Product Features - Powerful 1.5 HP motor

    • KING CANADA 8 In. x 13 In. Variable Speed Wood Lathe No. KWL-813VS

      $299.99

      KING CANADA 8 In. x 13 In. Variable Speed Wood Lathe No. KWL-813VS

      Canada

      SKU: 61233 Model: KWL-813VS Condition: New General Specifications: Horsepower: 1/3 hp Distance Between Centres: 13 " Dimensions: 12.25 (H) x 10.00 (W) x 27.75 (L) inches Additional Description: Swing Over Bed: 8" Swing Over Tool Post Base: 5-1/4" Spindle Size (RH Thread): 1" x 8 TPI Spindle Bore: 3/8" Variable

    • KING CANADA G3 Reversible Chuck (3-1/2 In.) No. 48232C

      $129.99

      KING CANADA G3 Reversible Chuck (3-1/2 In.) No. 48232C

      Canada

      SKU: 61201 Model: 48232C Condition: New Dimensions: 16.00 (H) x 16.00 (W) x 16.00 (L) inches Additional Description: - 1" x 8 TPI direct thread RH/LH (non-insert) - Compatible with Lathes up to to 14" swing - Direct thread chuck fits 1" x 8 TPI thread - Fits King Canada models KWL-1016C, KWL-1218VS, KWL-1443VS,

    • KING CANADA 6 In. 3 Jaw D1-4 Metal Lathe Chuck No. KLC-36-D1-4

      $300.74

      KING CANADA 6 In. 3 Jaw D1-4 Metal Lathe Chuck No. KLC-36-D1-4

      Canada

      SKU: 61074 Model: KLC-36-D1-4 Condition: New Dimensions: 12.00 (H) x 12.00 (W) x 12.00 (L) inches Additional Description: - 6" - 3 Jaw (D1-4) - These chucks are of D1-4 Camlock design with Camlock mounting bolts - 3 Jaw self centering chuck - Fits: KC-1236ML and KC-1440ML-6 Note: KLC-36-D1-4 will not fit the model

    • KING CANADA 5/8 In. Metal Lathe Tool Holder No. KM-058

      $72.17

      KING CANADA 5/8 In. Metal Lathe Tool Holder No. KM-058

      Canada

      SKU: 61084 Model: KM-058 Condition: New Dimensions: 4.00 (H) x 4.00 (W) x 4.00 (L) inches Additional Description: Ideal for turning, facing and boring operations Fits King metal lathes models KC-1236ML, KC-1440ML-6 and KQCT-1015 For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave,

    • KING CANADA 16 In. x 40 In. Gearhead Metal Lathe No. KC-1640ML

      $16,999.00

      KING CANADA 16 In. x 40 In. Gearhead Metal Lathe No. KC-1640ML

      Canada

      SKU: 61067 Model: KC-1640ML Condition: New General Specifications: Horsepower: 4 hp Distance Between Centres: 40" " Dimensions: 51.25 (H) x 33.50 (W) x 76.38 (L) inches Additional Description: Swing Over Bed: 16" Swing Over Cross Slide: 10" Swing Over Gap: 22" Width of Bed: 10" Spindle Bore Diameter: 2" Taper

    • KING CANADA Cabinet Stand 16 In. X 20 In. Combo Lathe/Mill (KC-1620CLM)

      $399.00

      KING CANADA Cabinet Stand 16 In. X 20 In. Combo Lathe/Mill (KC-1620CLM)

      Canada

      SKU: 61060 Model: SS-1620CLM Condition: New Dimensions: 20.00 (H) x 31.00 (W) x 42.00 (L) inches Additional Description: Note: For more information, see [instructions](http://files.kingcanada.com/catalog/products/instructionmanualxm/SS-1620CLM%20manual-eng.pdf) If you're interested in the Metal Lathe this goes

    • KING CANADA Live Center MT 2 No. KLC-2M

      $69.00

      KING CANADA Live Center MT 2 No. KLC-2M

      Canada

      SKU: 61078 Model: KLC-2M Condition: New Dimensions: 3.00 (H) x 3.00 (W) x 6.00 (L) inches Additional Description: Use: Metal lathe Taper Shank: MT #2 For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC V4W 4A9 Phone: 604.449.1880 Email: sales@lenmark.com View more products

    • KING CANADA MT 3 Live Center No. KLC-3M

      $79.00

      KING CANADA MT 3 Live Center No. KLC-3M

      Canada

      SKU: 61079 Model: KLC-3M Condition: New Dimensions: 3.00 (H) x 3.00 (W) x 6.00 (L) inches Additional Description: Use: Metal lathe Taper Shank: MT #3 For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC V4W 4A9 Phone: 604.449.1880 Email: sales@lenmark.com View more products

    • KING CANADA 16 In. x 40 In. Gearhead Metal Lathe w/ Taper Attachment No. KC-1640ML/KM-055

      $17,499.00

      KING CANADA 16 In. x 40 In. Gearhead Metal Lathe w/ Taper Attachment No. KC-1640ML/KM-055

      Canada

      SKU: 61068 Model: KC-1640ML/KM-055 Condition: New General Specifications: Horsepower: 4 hp Distance Between Centres: 40" " Dimensions: 51.25 (H) x 33.50 (W) x 76.38 (L) inches Additional Description: Swing Over Bed: 16" Swing Over Cross Slide: 10" Swing Over Gap: 22" Width of Bed: 10" Spindle Bore Diameter: 2"

    • KING CANADA 14 In. x 40 In. Metal Lathe w/ Taper Attachment No. KC-1440ML-2/KM-054

      $9,999.00

      KING CANADA 14 In. x 40 In. Metal Lathe w/ Taper Attachment No. KC-1440ML-2/KM-054

      Canada

      SKU: 61066 Model: KC-1440ML-2/KM-054 Condition: New General Specifications: Horsepower: 2 hp Distance Between Centres: 40" " Dimensions: 53.00 (H) x 32.00 (W) x 75.00 (L) inches Additional Description: Swing Over Bed: 14" Spindle Bore: 2" Swing Over Cross Slide: 8-5/8" Taper in Headstock: MT #6 Taper in Tailstock: