"makitas" in Buy & Sell in Laurentides
Results 1 - 40 of 44
Filters
Results 1 - 40 of 44
$225.00
Scie à chantourner MAKITA
Laurentides
Scie à chantourner de marque Makita - état neuf - utilisé 5 minutes . André 450-302-2225
$75.00
Perceuse Makita a Angle
Saint-Jérôme
Perceuse avec batterie et chargeur Makita de 9.8 volt idéal pour percer endroit restreint qui sont utilisé dans aviation.
$450.00
Ponceuse à rouleau Makita - 9741
Saint-Jérôme
Ponceuse à roue Makita model 9741. Vient avec 2 brosses, une en acier et une en nylon idéal pour décaper balcons et autres projets de restauration. Le tout en excellente condition.
$80.00
Radio makita 18v + 1 batterie
Laurentides
fonctionne bien donne une batterie avec mais vien sans chargeurs aucun chargeurs inclu offre raisonnable accepte
Please Contact
Assorted Core Bits 2,2-1/2, 3, 4,5',6 (Industrial Grade
Canada
THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - NORTH YORK See addresses below Assorted Core Bits The roof-shaped guide teeth ensure improved tool alignment and increased rotational stability. 1)The wedge shape is particularly aggressive in collision with steel reinforcement 2)The effect is supported by the
$100.00
MAKITA SCIE ALTERNATIVE ET PERCEUSE A BETON SDS
Mirabel
scie alternative MAKITA et perceuse a beton pour meche SDS MAKITA a fil non negociable
$120.00
Rabot électrique Makita
Saint-Calixte
Rabot électrique Makita en tres bon état avec boitier en métal. (outil électrique)
$175.00
scie a onglet Makita de 14 pouces avec lame fs toll au carbure d
Sainte-Sophie
scie a onglet de 14 pouces Makita avec lame au carbure de 90 dents .
$100.00
Deux visseuses électriques dont 1 à percussion
Val-Morin
Ces deux visseuses, dont une à percussion, sont de marque Mikita et en très bonnes conditions. Le prix demandé pour les deux est de 100$. Pour plus d’informations, veuillez appeler au 819-322-1494. ...
Please Contact
SDS PLUS-sds max Chisels
Canada
THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - BRAMPTON See addresses below Visit our website For More Tools http://www.chtools.ca Special impact resistant chisel forged in one piece with high surface-harden. Optimum denudation capacity by maximum energy transmission of the hammer drill to the chisel edge.
$123.00
VISSEUSE -MELEUSE-PERCEUSE
Lachute
• Visseuse Makita pour gyproc avec manuel $40 • Perceuse Visseuse Makita 3/8'' avec manuel $30 • Rectifieuse Dewalt 4 1/2'' avec manuel $50 • Rectifieuse Makita 5'' modèle 9005B, 10,000 t/min- 10A ...
$220.00
Sableuse a ruban makita
Laurentides
Sableuse a courroie makita. Papier sablé inclus(boîtes entamés de moitié)
Please Contact
SDS MAX 4-1/2(12Long) Wide Jumbo Chisel Reg $65 Sale$30
Canada
THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - NORTH YORK See addresses below Assorted Core Bits (Industrial Grade) Assorted Core Bits (Industrial Grade) Industrial grade HEAVY DUTY Heavy Duty Floor Scraper Reg $299 Sale $80 Most Affordable System on the Market Common uses include: Ceramic Tile Removal Vinyl
Please Contact
HUGE Discount! DEWALT 20V MAX Compact Brushless Drill and Impact Combo Kit | FAST, FREE Delivery to Your Door
Canada
Shipping by sellerVisit Website Below to Order Now & get FAST, FREE Delivery to Your Door! ======= - DEWALT brushless motor delivers up to 57-Percent more run time over brushed - Compact (5.4-in front to back), lightweight (2.0 lbs) Impact Driver design fits into tight areas - Compact (7.52-in front to back), lightweight Drill/Driver
Shipping by seller$40.00
MAKITA 4-1/2 In. Angle Grinder GA4530 120V 11000 RPM 6A
Canada
SKU: 117359 Model: GA4530 Condition: Used S/N: 0027331Y Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: CHINA Dimensions: 4.50 (H) x 4.50 (W) x 15.00 (L) inches Additional Description: Capacity: 4-1/2" Amp: 6A Speed: 11000 RPM For more information, please contact us at: Lenmark Industries
$50.00
MAKITA 1/2 In. Impact Wrench Nut Runner 6905B
Canada
SKU: 117343 Model: 6905B Condition: Used S/N: 343737E Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 3.50 (H) x 9.00 (W) x 10.50 (L) inches Additional Description: Amp: 4A HZ: 50-60 Hz RPM: 1700 RPM For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave,
$25.00
MAKITA 1/2 In. Corded Hammer Drill HP1501 120V 2800 RPM 5A
Canada
SKU: 117341 Model: HP1501 Condition: Used S/N: 253486G Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 3.00 (H) x 9.00 (W) x 11.50 (L) inches Additional Description: Capacity: 1/2" Amp: 5 A Speed: 2800 RPM For more information, please contact us at: Lenmark Industries Ltd. 27576 51a
$29.99
KING CANADA Track Connector Kit No. KW-302
Canada
SKU: 61296 Model: KW-302 Condition: New Dimensions: 1.00 (H) x 4.00 (W) x 10.00 (L) inches Additional Description: Product Features - Two 50" Tracks can be joined together using this Connector Kit - Two support strips included to prevent set screws from marring the aluminum Track - Mounts in the slots on top and
$39.99
KING CANADA 2 Pc. Clamp Kit for 50 In. Track No. KW-303
Canada
SKU: 61297 Model: KW-303 Condition: New Dimensions: 2.00 (H) x 10.00 (W) x 10.00 (L) inches Additional Description: Product Features - Secures 50" Track to material and/or workbench preventing any shifting - Clamps slide into slots underneath 50" Track Note: ? Optional clamp kit (KW-303) is compatible with Makita®
$79.99
KING CANADA 50 In. Track For Plunge Cut Track Saw No. KW-300
Canada
SKU: 61294 Model: KW-300 Condition: New Dimensions: 1.00 (H) x 7.00 (W) x 50.00 (L) inches Additional Description: Product Features - Extruded aluminum construction - Rubber splinter guard indicates the cut line - Allows easy and accurate straight cuts - Two tracks can be connected together using optional Track
$300.00
MAKITA 115 Volts 4.2 Amp Belt Sander 9030
Canada
SKU: 30744 Model: 9030 Condition: Used S/N: 161315E Dimensions: 3.20 (H) x 7.00 (W) x 17.00 (L) inches Additional Description: Voltage: 115 Volts Amperes: 4.2 Amp Hertz: 60 Hz Watts: 490W Max. Pressure: 1000 m/min. For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC V4W
$45.00
MAKITA 7-1/4'' Circular Saw, with Electric Brake 5007FA
Canada
SKU: 24728 Model: 5007FA Condition: Used General Specifications: Blade Diameter: 7-1/4" Voltage: 120 volts Phase: Single-phase Saw Type: Mitre/Crosscut Saws Made In: CHINA Dimensions: 10.00 (H) x 7.00 (W) x 11.00 (L) inches Additional Description: Power: 2000 watts Arbor Size: 5/8" Max. Cutting Capacity (at 90°):
$300.00
MAKITA Portable Band Saw 2107F
Canada
SKU: 24661 Model: 2107F Condition: Used S/N: 53647 General Specifications: Horsepower: 1 hp Saw Type: Bandsaws Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 8.00 (H) x 11.00 (W) x 20.00 (L) inches Additional Description: Power Input: 710W Round Workpiece Capacity: 120 mm (4-3/4?)
$110.00
MAKITA 14 in. Cut-Off Saw 2414DB
Canada
SKU: 24668 Model: 2414DB Condition: Used General Specifications: Horsepower: 2.2 hp Saw Type: Mitre/Crosscut Saws Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: JAPAN Dimensions: 15.00 (H) x 12.00 (W) x 23.00 (L) inches Additional Description: Wattage: 1650 watts Amps: 15 amp Blade
$375.00
MAKITA 8-1/4 In. Table Saw 2702
Canada
SKU: 17448 Model: 2702 Condition: Used S/N: 11531 A General Specifications: Horsepower: 3 hp Table Size: 27" x 22" Blade Diameter: 8-1/4" Voltage: 120 volts Phase: Single-phase Saw Type: Table Saws Dimensions: 42.00 (H) x 25.00 (W) x 28.00 (L) inches Additional Description: Arbor: 5/8" Blade Length: ?22? No load
$40.00
MAKITA 4-1/2 In. Angle Grinder 9524NB 120V 1100 RPM 5A
Canada
SKU: 107741 Model: 9524NB Condition: Used S/N: 750519 Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: CHINA Dimensions: 4.50 (H) x 4.50 (W) x 15.00 (L) inches Additional Description: Capacity: 4-1/2" Amp: 5A Speed: 11000 RPM For more information, please contact us at: Lenmark Industries
$60.00
MAKITA Screwdriver 6305BV 115V 2500 RPM 4.8A
Canada
SKU: 107732 Model: 6805BV Condition: Used S/N: 27560E Electrical Specifications: Voltage: 115 volts Phase: Single-phase Dimensions: 4.00 (H) x 9.75 (W) x 9.75 (L) inches Additional Description: Shank Size: 1/4" Hex Amp: 4.8A Speed: 2500 RPM For more information, please contact us at: Lenmark Industries Ltd. 27576
$50.00
MAKITA 1/2 In. Electric Drill 120V 550 RPM 6.5A
Canada
SKU: 107723 Condition: Used Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 3.50 (H) x 8.00 (W) x 11.00 (L) inches Additional Description: Capacity: 1/2" Amp: 6.5A Speed: 550RPM For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC V4W 4A9
$40.00
MAKITA 7-1/4'' Circular Saw 5007NB 120V 5800 RPM 13A
Canada
SKU: 107748 Model: 5007NB Condition: Used S/N: 442597 Electrical Specifications: Voltage: 12 volts Phase: Single-phase Dimensions: 11.00 (H) x 10.00 (W) x 15.00 (L) inches Additional Description: Capacity: - 90° 2-3/8" ( 60 mm) - 45° 1-3/4" (46 mm) Power: 1400W Speed: 5800 RPM For more information, please contact
$30.00
MAKITA Reciprocating Saw JR3050T 120V 2800 SPM 9A
Canada
SKU: 107703 Model: JR3050T Condition: Used S/N: 06S5423 Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: CHINA Dimensions: 4.00 (H) x 7.00 (W) x 17.00 (L) inches Additional Description: Amp: 9 Amp Strokes/min: 2800 spm For more information, please contact us at: Lenmark Industries Ltd.
$349.99
KING CANADA 6-1/2 In. Variable Speed Plunge Cut Track Saw No. KC-8365
Canada
SKU: 61291 Model: KC-8365 Condition: New General Specifications: Blade Diameter: 6-1/2" Voltage: 120 volts Phase: Single-phase Dimensions: 9.63 (H) x 9.00 (W) x 23.00 (L) inches Additional Description: Product Features - Plunge Cut Track Saw is ideal for smooth cutting of solid wood and plywood, especially when
$200.00
MAKITA 1/2 In. Electric Router No. 3612BR
Canada
SKU: 23146 Model: 3612BR Condition: Used S/N: 160539E Dimensions: 12.00 (H) x 9.00 (W) x 85.00 (L) inches Additional Description: Continuous Rating Input: 1,530W Capacity Collet: 12mm or 1/2-inch Plunge Capacity: 0 - 65mm (0 - 2-9/16-inch) Base Dia.: 160mm (6-1/4-inch) No Load Speed: 23,000 rpm Overall Height:
$80.00
MAKITA 10 In. Miter Saw No. 2401B
Canada
SKU: 17057 Model: 2401B Condition: Used General Specifications: Horsepower: 2.4 hp Blade Diameter: 10" Voltage: 115 volts Phase: Single-phase Saw Type: Mitre/Crosscut Saws Dimensions: 19.00 (H) x 18.10 (W) x 20.50 (L) inches Additional Description: Max RPM: 4100 For more information, please contact us at: Lenmark
$60.00
MAKITA 1 In. SDS Plus Rotary Hammer HR2475 120V
Canada
SKU: 107714 Model: HR2475 Condition: Used Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: CHINA Dimensions: 3.00 (H) x 8.00 (W) x 19.00 (L) inches Additional Description: Capacity: Concrete 1", Steel 1/2" Blows Per Minute: 0 - 4,500 BPM No Load Speed: 0 - 1,100 RPM For more information,
$35.00
MAKITA Electric Drill 120V
Canada
SKU: 107724 Condition: Used Dimensions: 7.50 (H) x 7.00 (W) x 11.00 (L) inches For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC V4W 4A9 Phone: 604.449.1880 Email: sales@lenmark.com View more products at www.lenmark.com
$50.00
MAKITA 7-1/4 In. Circular Saw 5007FA 120V 5800 RPM 15A
Canada
SKU: 107744 Model: 5007FA Condition: Used S/N: 0049506 Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 10.00 (H) x 10.50 (W) x 12.00 (L) inches Additional Description: Power: 2000 watts Arbor Size: 5/8" Max. Cutting Capacity (at 90 deg): 2-3/8" Max. Cutting Capacity (at 45 deg): 1-3/4"
$499.00
The 37-pound demolition hammer Special Price Regular Price $900 - Now $499
Canada
CANADIAN ELECTRICAL SAFETY CERTIFIED DRILL (CETL) SIX MONTH WARRANTY THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - BRAMPTON See addresses below Visit our website For More Tools http://www.chtools.ca hex 37-pound demolition hammer Special Price Regular Price $900 - Now $499 BRAND NEW IN THE BOX Description:
Browse other categories in Classifieds in Laurentides
Browse Buy & Sell by location