"haas" in Other Business & Industrial in Ontario

Results 1 - 33 of 33

Filters

Category

Other Business & Industrial

Price

Results 1 - 33 of 33

    • HAAS - VMC - Model 1

      $1.00

      HAAS - VMC - Model 1

      Barrie

      NO REASONABLE OFFER REFUSED HAAS VMC in working condition. Currently in use, can be seen under power. Great machine for small or hobby shop. Call Robert at +17053455434

    • 2020' HAAS ST-15 CNC LATHE WITH V2 SERVO BARFEED

      Please Contact

      2020' HAAS ST-15 CNC LATHE WITH V2 SERVO BARFEED

      Mississauga

      LIKE NEW Haas ST-15 CNC Lathe with good options and V2 Haas Bar Feed ** Only 896 cutting Hours** Barrie warehouse! Control Haas Chuck Size 8" Spindle Nose A2-6 Bar Capacity 2.5" Swing 16.5" Turning ...

    • 2016' HAAS VF-2SS CNC VERTICAL MACHINING CENTER WITH PROBE

      Please Contact

      2016' HAAS VF-2SS CNC VERTICAL MACHINING CENTER WITH PROBE

      Mississauga

      Just Purchased **Excellent condition** Haas Super Speed VF-2SS with nice options including WIPS Probing system Specifications: Table Size: 36" x 18" X Axis Travel: 30" Y Axis Travel: 16" Z Axis ...

    • 2014' HAAS VF-2TR CNC 5-AXIS VERTICAL MACHINING CENTER

      Please Contact

      2014' HAAS VF-2TR CNC 5-AXIS VERTICAL MACHINING CENTER

      Mississauga

      Like New installed in 2014' Haas VF-2TR 5-axis CNC Machining Center with Trunion Table **Only 1.400 cutting Hours** Barrie warehouse! ***Save from New on a Great Machine!*** Control Haas Table: 36”x ...

    • 2006 HAAS TM-2 VERTICAL CNC MACHINING CENTER

      $19,500.00

      2006 HAAS TM-2 VERTICAL CNC MACHINING CENTER

      Burlington

      2006 Haas TM-2 Vertical CNC Machining Center, Air-Cooled Spindle, Central Lubrication X-Axis 40" Y-Axis 16" Z-Axis 16" Power 7.5 hp RPM 4,000 RPM # ATC 10 Taper CAT-40 Table-W 10.5" Table-L 57.75" ...

    • 20X, 16Y, 15.5Z, Haas, DT-1, 2020, CNC Drill & Tap Machine W/5-Axis Trunnion

      Please Contact

      20X, 16Y, 15.5Z, Haas, DT-1, 2020, CNC Drill & Tap Machine W/5-Axis Trunnion

      Canada

      Table Area 15" x 26" X-Axis Travel 20" Y-Axis Travel 16" Z-Axis Travel 15.5" Spindle Nose to Table 21.5" Max, 6" Min. No. of Stations on ATC 20+1 Spindle Taper BT-30 Max, Spindle Speed 10,000 Rpm Rapid Feed Rate, X/Y/Z 2400 ipm

    • 2008 HAAS VF-2

      Please Contact

      2008 HAAS VF-2

      Mississauga

      2008 HAAS VF-2 Table Size: 36" x 14" Table Capacity: 3,000 pounds X-Axis Travel: 30" Y-Axis Travel: 16" Z-Axis Travel: 20" Spindle Taper: BT 40 Spindle Speed: 8,000 rpm Main Motor: 20 hp Tool Changer ...

    • 2015 HAAS VF-3YT

      Please Contact

      2015 HAAS VF-3YT

      Mississauga

      2015 HAAS VF-3YT SPECIFICATIONS: X 40" Y 26" Z 25" POWER 30 hp RPM 15,000 RPM # ATC 24 TAPER CT 40 TABLE-W 25" TABLE-L 54" # AXIS 3 CONTROL CNC (Haas 32 bit) Catalog Specifications - Buyer to verify ...

    • 2007 HAAS TM-2

      Please Contact

      2007 HAAS TM-2

      Mississauga

      2007 HAAS TM-2 SPECIFICATIONS: TABLE WORKING SURFACE ............... 10.5" X 57.75" MAXIMUM WORK PIECE WEIGHT ON TABLE .. 1000 LBS TRAVELS: LONGITUDINAL(X) ..................... 40" (1016mm) CROSS(Y) ...

    • 2015 HAAS ST-30

      Please Contact

      2015 HAAS ST-30

      Mississauga

      2015 HAAS ST-30 CNC LATHE Specifications Machine Control Haas CNC Control Maximum Swing 31.75" Maximum Turning Diameter 18" Maximum Machining Length 23" Maximum Bar Capacity 3" X-Axis Travel 12.5" ...

    • 2008 HAAS TL-2**AUTO TURRET**

      Please Contact

      2008 HAAS TL-2**AUTO TURRET**

      Mississauga

      HAAS TL-2 CNC TOOLROOM LATHE 2008 CONTROL: HAAS CNC CONTROL MAX SWING OVER BED: 20" MAX SWING OVER CROSS SIDE: 11" MAX CUTTING DIAMETER: 16" MAX MACHINING LENGTH: 48" X-AXIS TRAVEL: 8" Z-AXIS TRAVEL: ...

    • 2020 HAAS TM-1P

      Please Contact

      2020 HAAS TM-1P

      Mississauga

      2020 Haas TM-1P X-Axis Travel: 30" Y-Axis Travel: 12" Z-Axis Travel: 16" Spindle Speed: 6,000 RPM Spindle Taper: CAT 40 Spindle Motor: 7.5 HP Tool Magazine Capacity: 10 ATC Control: Haas CNC Equipped ...

    • 2009 HAAS VF-2**10K RPM**

      Please Contact

      2009 HAAS VF-2**10K RPM**

      Mississauga

      2009 HAAS VF-2 VERTICAL MACHINING CENTER SPECIFICATIONS: X-AXIS TRAVEL.......................... 30" Y-AXIS TRAVEL.......................... 16" Z-AXIS TRAVEL.......................... 20" SPINDLE ...

    • 2004 HAAS VF-4

      Please Contact

      2004 HAAS VF-4

      Mississauga

      2004 HAAS VF-4 WITH ROTARY TABLE Specifications TABLE LENGTH 52" TABLE WIDTH 18" X-AXIS TRAVEL 50" Y-AXIS TRAVEL 20" Z-AXIS TRAVEL 25" SPINDLE SPEED 7,500 RPM SPINDLE MOTOR 20 hp SPINDLE TAPER CAT 40 ...

    • HAAS VF-10/50

      Please Contact

      HAAS VF-10/50

      Mississauga

      1998 HAAS VF-10/50 SPECIFICATIONS: X TRAVEL 120" Y TRAVEL 32" Z TRAVEL 30" POWER 30 hp RPM 7,500 RPM # ATC 30 TABLE-W 120" TABLE-L 28" SPINDLE TAPER CAT 50 FIXTURES/VICES NOT INCLUDED Don Harrison ...

    • 2015 HAAS TM-2P

      Please Contact

      2015 HAAS TM-2P

      Mississauga

      2015 Haas TM-2P X-Axis Travel: 40" Y-Axis Travel: 16" Z-Axis Travel: 16" Spindle Speed: 6,000 RPM Spindle Taper: CAT 40 Spindle Motor: 7.5 HP OPTIONS • 4th & 5th axis drives • TRT100 Dual-Axis Rotary ...

    • 2011 HAAS VF-2SSYT

      Please Contact

      2011 HAAS VF-2SSYT

      Mississauga

      2011 HAAS VF-2SSYT Specifications: TABLE LENGTH 36" TABLE WIDTH 18" X-AXIS TRAVEL 30" Y-AXIS TRAVEL 20" Z-AXIS TRAVEL 20" SPINDLE SPEED 12,000 RPM SPINDLE MOTOR 30 hp SPINDLE TAPER CAT 40 TOOL ...

    • 2011 HAAS EC-400 CNC HMC

      Please Contact

      2011 HAAS EC-400 CNC HMC

      Mississauga

      2011 HAAS EC-400 CNC HMC # Axis 4 Number of Pallets 2 Pallet Dimensions 15.75" x 15.75" Maximum Pallet Load 1,000 LBS B-Axis (Pallet Indexing) 0.001° X-Axis (Longitudinal Table Travel) 20" Y-Axis ...

    • 2009 HAAS VF-5D/40TR

      Please Contact

      2009 HAAS VF-5D/40TR

      Mississauga

      2009 HAAS VF-5D/40TR SPECIFICATIONS: TRAVELS X-AXIS ............................................................. 50" Y-AXIS ............................................................. 26" Z-AXIS ...

    • 2013 HAAS ST-10 CNC LATHE

      Please Contact

      2013 HAAS ST-10 CNC LATHE

      Mississauga

      2013 HAAS ST-10 CNC LATHE TRAVELS: X-AXIS: 7.88" Z-AXIS: 14" RAPID TRAVERSE: 1200 IPM X + Z CHUCK SIZE: 6.5" SWING OVER BED: 16.25" MAXIMUM TURNING DIAMETER: 14" MAXIMUM TURNING LENGTH: 14" BAR ...

    • Haas VF-5/40**Through Spindle Coolant**

      Please Contact

      Haas VF-5/40**Through Spindle Coolant**

      Mississauga

      2021 HAAS VF-5/40 X AXIS TRAVEL 50” Y AXIS TRAVEL 26” Z AXIS TRAVEL 25” SPINDLE SPEED 8,100 RPM SPINDLE MOTOR 30HP INLINE DIRECT VECTOR DRIVE SPINDLE TAPER CAT 40 TOOL CHANGER 30 + 1 SIDEMOUNT RAPIDS ...

    • NICE CLEAN HAAS 2012 MINIMILL

      Please Contact

      NICE CLEAN HAAS 2012 MINIMILL

      Mississauga

      2012 HAAS MINIMILL SPECIFICATIONS X AXIS TRAVEL 16" Y AXIS TRAVEL 12" Z AXIS TRAVEL 10" RAPID RATE X AXIS 600 IPM RAPID RATE Y AXIS 600 IPM RAPID RATE Z AXIS 600 IPM TABLE SIZE 28.75" x 12" MAX TABLE ...

    • 2023 HAAS TM-2P

      Please Contact

      2023 HAAS TM-2P

      Mississauga

      2023 HAAS TM-2P GENERAL SPECIFICATIONS: X-Axis Travel: 40" Y-Axis Travel: 16" Z-Axis Travel: 16" Spindle Speed: 6,000 RPM Spindle Taper: CAT 40 Spindle Motor: 7.5 HP Coolant: Programmable Coolant ...

    • 2013 HAAS VF-3

      Please Contact

      2013 HAAS VF-3

      Mississauga

      2013 HAAS VF-3 Table Size L x W: 48” x 18” X Axis Travel: 40” Y Axis Travel: 20” Z Axis Travel: 25” Rapid Rate X Axis: 1000 IPM Rapid Rate Y Axis: 1000 IPM Rapid Rate Z Axis: 1000 IPM Max Table Load: ...

    • 1998 Haas HS1RP CNC Horizontal Machining Center

      Please Contact

      1998 Haas HS1RP CNC Horizontal Machining Center

      Vaughan

      1998 Haas HS1RP CNC Horizontal Machining Center. 20HP Vector Drive. 710IPM Brushless Servos. Haas CNC Control Console. 360/480V, 3PH, 50/60HZ, 20A, Interrupting Capacity 10000A. X Axis Travel: 24", Y ...

    • CNC Mill Haas VF-4

      $15,000.00

      CNC Mill Haas VF-4

      Hamilton

      Haas VF-4 CNC Mill, 3+2 Axis, 10" 4-Jaw Manual Chuck, 24-tool magazine, X-axis travel: 1270mm, Y-axis travel: 508mm, Spindle Taper: CATV40, Year: 1998, Serial: 15279, Controller: Haas 96-8000, ...

    • 2018 HAAS UMC 750SS 5-axis CNC - Low Hours - Excellent

      Please Contact

      2018 HAAS UMC 750SS 5-axis CNC - Low Hours - Excellent

      Mississauga

      Used Haas UMC-750SS 5-Axis Vertical CNC Machining Centre Haas Super Speed 5-Axis VMC Date of Mfg. 07.2018 Power on hours: 25,396 hrs Cycle start Time: 6614 hrs Feed Cutting Time: 4617 hrs ...

    • HAAS HRT-210 Rotary Table

      $5,500.00

      HAAS HRT-210 Rotary Table

      Mallorytown

      Up for sale is a HAAS HRT-210 rotary table with controller. It also has an air operated quick change system for production setups. Short drawbar for the quick change system is missing, but can be ...

    • 2019 HAAS ST-20Y CNC Lathe + HAAS Bar Feeder + Live Tools Y-axis

      Please Contact

      2019 HAAS ST-20Y CNC Lathe + HAAS Bar Feeder + Live Tools Y-axis

      Mississauga

      HAAS ST-20Y CNC Turning Centre + HAAS Bar Feeder. Date of Mfg. 08/2019 LOW HOURS: Cycle Start Time: 7818 hours Feed Cutting Time: 6205 hours Specifications: Chuck Size...................... 8" ...

    • LIKE NEW HPS Transformer 600v 3 Phase large machinery like CNC

      $4,500.00

      LIKE NEW HPS Transformer 600v 3 Phase large machinery like CNC

      Oakville

      Were bought for Haas CNC's 1 year or so ago, Company moved back to USA no longer needed.

    • 30"X, 16"Y, 16"Z, Haas, TM-1, 2010, CNC Vertical Mill, Low Hours

      Please Contact

      30"X, 16"Y, 16"Z, Haas, TM-1, 2010, CNC Vertical Mill, Low Hours

      Concord

      X-Axis Travel 30" Y-Axis Travel 16" Z-Axis Travel 16" Spindle Nose To Table ( Max ) 20" Spindle Nose To Table ( Min. ) 4" Max Spindle Speed 4000 Rpm Main Motor 7.5 Hp Spindle Taper Cat 40 Work Table ...

    • 2004 HAAS VF-2D CNC Machining Centre - 5 axis rotary table

      $35,000.00

      2004 HAAS VF-2D CNC Machining Centre - 5 axis rotary table

      Mississauga

      HAAS VF-2D CNC Machining Centre with T5C4 Tilting 5C Indexer / 5-Axis Rotary Table, 2010 https://www.haascnc.com/machines/rotaries-indexers/5-axis-rotaries/models/t5c4.html Date of Mfg. 04/2004 ...

    • Haas HS1RP CNC Horizontal Machining Center

      Please Contact

      Haas HS1RP CNC Horizontal Machining Center

      Brampton

      Here Is A Haas HS1RP CNC Horizontal Machining Center We Have In Stock, If You Require Anymore Photo`s & Info Please Call Or E-mail Us. Specifications: Model - HS1RP Year - 08/1998 Pallet Size (2) - ...