"tool hand" in Other in Napanee

Results 1 - 18 of 18


Filters


Category

Other


Price






Results 1 - 18 of 18

    • Firm Grip™ 1/2 Inch Pex Pipe Crimping Tools

      $59.95

      Firm Grip™ 1/2 Inch Pex Pipe Crimping Tools

      Canada

      Shipping by seller

      FIRM GRIP™ 1/2 INCH PEX PIPE CRIMPING TOOLS Similar half-inch PEX pipe crimping tools sell at a Big Box store for $124! CRIMP PEX TUBING EVEN IN TIGHT AREAS Features Crimping range: 1/2 inches Length: 10.8 inches Weight: 2.4 pounds Comes with a go/no-go sizing gauge Angled head for use in tight spots Long handle

      Shipping by seller
    • Brand New Air Stucco Hopper Gun

      $89.99

      Brand New Air Stucco Hopper Gun

      Ontario

      STUCCO HOPPER GUN $89.99 CAN BE USED FOR PLASTERING A STUCCO HOUSE, ALSO CAN BE USED APPLYING PLASTER MIXES AND MORE FEATURE A SLIDE OUT HOLE SPRAY TIP PLATE. 3 BRASS AIR JET NOZZLE REMOVABLE AND CLEANABLE JETS. HOPPER HOLES OVER 0.9 GALLON )20lb) OF MATERIEL. IES 3-5HP AIR COMPRESSOR THAT DELIVERS ONLY 4-6CFM

    • Drywall lift Two Week Sale(Money Back Guarantee)

      $225.00

      Drywall lift Two Week Sale(Money Back Guarantee)

      Ontario

      Description Drywall lift Two Week Sale(Money Back Guarantee) Drywall lift Two Week Sale(Money Back Guarantee) THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - BRAMPTON See addresses below Visit our website For More Tools http://www.chtools.ca Reg $ 300 Sale $225 Brand New Drywall Lift | Panel Hoist Money Back

    • Grout Clean-Up System Set  Reg$79.99 sale$39.99

      $39.99

      Grout Clean-Up System Set Reg$79.99 sale$39.99

      Ontario

      THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - BRAMPTON See addresses below Grout Clean-Up System Set Reg$79.99 sale$39.99 Makes cleaning off excess wall & floor grout from tile installations quick & easy 24 Litre red plastic bucket with 4 x detachable plastic wheel castors 1 x removable metal grid Heavy duty

    • Heat Lances NOW IN CANADA!  Get yours before they are gone! Heat lances/crack filling/crack repair/torch

      $7,199.99

      Heat Lances NOW IN CANADA! Get yours before they are gone! Heat lances/crack filling/crack repair/torch

      Canada

      Heat Lances NOW IN CANADA! Due to COVID-19 we will be running on an appointment only basis until further notice. For sales and service, phone or email to book an appointment. 1-866-595-2308 After countless requests for an Affordable Heat Lance in Canada , Pavement Depot is proud to announce we will now be offering

    • OPTIMIL Canter Line 6 In. - 14 In. Diameter up to 20 ft Logs

      $1,450,000.00

      OPTIMIL Canter Line 6 In. - 14 In. Diameter up to 20 ft Logs

      Canada

      SKU: 121238 Year: 2000 Condition: Used S/N: 63286 Additional Description: [Double Length Infeed Auto Rotate Drawing](https://netorg3480978.sharepoint.com/:b:/s/LenmarkPublic/EX3JVhMlp_RMiCATmqQYP2gBfHsBog9uzGF7HWB704Ghbw?e=Zxx6oQ) [Separator & VDAG Drawing](https://netorg3480978.sharepoint.com/:b:/s/LenmarkPu

    • EINHELL 18V Cordless Brushless Compact Router with Fixed & Plunge Base TP-RO 18 Li BL

      $179.99

      EINHELL 18V Cordless Brushless Compact Router with Fixed & Plunge Base TP-RO 18 Li BL

      Canada

      SKU: 120770 Model: TP-RO 18 Li BL Condition: New Dimensions: 8.00 (H) x 11.00 (W) x 13.00 (L) inches Additional Description: Article #: 4350413 Motor type: Brushless motor Motor voltage: 18V Stroke height: 1.38" & 1.58" No load speed: 10,000 - 30,000 RPMCollet1/4" Max. router bit: 1.18" Product weight: 5.3 lbs

    • SENTRY EQUIPMENT CORP Insertable/Retractable Tool Holder, 750 PSI, 316SS

      $800.00

      SENTRY EQUIPMENT CORP Insertable/Retractable Tool Holder, 750 PSI, 316SS

      Canada

      SKU: 83442 Model: LP750WC6S-Q4518H-N-C6 Condition: Surplus New S/N: 1512787211-02 Made In: UNITED STATES Dimensions: 4.50 (H) x 10.00 (W) x 28.00 (L) inches Additional Description: ** New - Open box Max. Operating Pressure: 750 PSI Teflon Seal Min. Seal Operating Temperature: -90oF (-67oC) Max. Seal Operating

    • EINHELL 4540024 E-Case Rolling Tool Tower

      $199.99

      EINHELL 4540024 E-Case Rolling Tool Tower

      Canada

      SKU: 63045 Model: 4540024 Condition: New Additional Description: - System box set to store/transport devices and its accessories. - Locking system for connecting stacked cases. - 15 cm large wheels enable comfortable rolling on any surface. - E-Case L incl. 1x tray for hand tools. - E-Case S incl. foam inlay for

    • M.A. FORD Uniflute Counter Sink 64100002 (Set of 10)

      $140.00

      M.A. FORD Uniflute Counter Sink 64100002 (Set of 10)

      Canada

      SKU: 30720 Model: 64100002 Condition: Good Made In: UNITED STATES Dimensions: 3.25 (H) x 3.50 (W) x 4.25 (L) inches Additional Description: Type: 4 Piece Single Flute (Uniflute) Countersink Sets Size: 1/4" to 1" Included Angle: 82° Shank Diameter: Assorted Tool Material: High Speed Steel Finish Coating: Uncoated

    • ARNO WERKZEUGE 1.25 In. Boring Bar Internal Tool Holder 9-32R

      $90.00

      ARNO WERKZEUGE 1.25 In. Boring Bar Internal Tool Holder 9-32R

      Canada

      SKU: 30503 Model: 9-32R Condition: Good Dimensions: 1.50 (H) x 1.50 (W) x 12.00 (L) inches Additional Description: Groove Type: Internal Shank Style: Round Coolant: Through Coolant Hand: Right hand Shank Size: 1.25" For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC

    • MVD 270 ton iBend Hydraulic Press Brake C-Series C270-3700

      $170,000.00

      MVD 270 ton iBend Hydraulic Press Brake C-Series C270-3700

      Canada

      SKU: 29793 Model: C270-3700 Condition: New General Specifications: Bed Length: 3700 mm / 144.67 in. Tons: 270 ton Brake Type: Hydraulic Electrical Specifications: Voltage: 600 volts Phase: 3-phase Dimensions: 119.69 (H) x 104.33 (W) x 228.35 (L) inches Additional Description: Throat: 410 mm Daylight: 515 mm Stroke:

    • MVD 400 ton iBend Hydraulic Press Brake D-Series D400-4300

      $278,750.00

      MVD 400 ton iBend Hydraulic Press Brake D-Series D400-4300

      Canada

      SKU: 29795 Model: D400-4300 Condition: New General Specifications: Bed Length: 4300 mm / 169.29 in. Tons: 400 ton Brake Type: Hydraulic CNC: Yes Electrical Specifications: Voltage: 600 volts Phase: 3-phase Dimensions: 141.73 (H) x 109.84 (W) x 255.90 (L) inches Additional Description: Throat: 510 mm Daylight:

    • MVD 320 ton iBend Hydraulic Press Brake D-Series D320-3700

      $246,425.00

      MVD 320 ton iBend Hydraulic Press Brake D-Series D320-3700

      Canada

      SKU: 29794 Model: D320-3700 Condition: Used General Specifications: Bed Length: 3700 mm / 145.67 in. Tons: 320 ton Brake Type: Hydraulic CNC: Yes Electrical Specifications: Voltage: 600 volts Phase: 3-phase Dimensions: 135.43 (H) x 101.18 (W) x 297.64 (L) inches Additional Description: Throat: 510 mm Daylight:

    • PHASE II MET-U1A Ultra Sonic Hardness Tester

      $7,605.00

      PHASE II MET-U1A Ultra Sonic Hardness Tester

      Canada

      SKU: 100580 Model: MET-U1A Condition: Good S/N: 120653 Dimensions: 17.00 (H) x 12.00 (W) x 18.00 (L) inches Additional Description: Manual Test Stand Capacity: 500N Test Stroke: 70mm Standard Accessories: - Base Instrument - 15N (1.5kgf) Hand-Held Probe (MET-U1A) - Calibrated Test Blocks (2pc) - Custom Carry Case

    • 5 Pcs Laptop Repair Tool Kit - P2 0.8 mm, P5 1.2 mm, P6 1.5 mm Pentalobe Screwdrivers, T5 Torx Screwdriver and Plastic S

      $24.00

      5 Pcs Laptop Repair Tool Kit - P2 0.8 mm, P5 1.2 mm, P6 1.5 mm Pentalobe Screwdrivers, T5 Torx Screwdriver and Plastic S

      Canada

      Shipping by seller

      Product: 5 Pcs Laptop Repair Tool Kit - P2 0.8 mm, P5 1.2 mm, P6 1.5 mm Pentalobe Screwdrivers, T5 Torx Screwdriver and Plastic Spudger for MacBook Air, Pro Retina, Etc. Description: Precision screwdriver set with a plastic spudger can be used for a variety of projects from hobbies, cellphones, cameras, computers,

      Shipping by seller
    • Brand New 72 X 80 Moving Blankets

      $13.99

      Brand New 72 X 80 Moving Blankets

      Ontario

      * Protects fragile surfaces from scuffs and scratches * Ideal for protecting large items during moving and storage * Can also be used as a dust cover or flooring protector DIY TOOLS is a professional tool store located at 2901 Steeles Ave West, Unit 38(southeast corner of Keele/Steeles).We carry Pitbull, Neiko,

    • BRAND NEW 2 TON FOLDING CHERRY PICKER/SHOP CRANE

      $349.99

      BRAND NEW 2 TON FOLDING CHERRY PICKER/SHOP CRANE

      Ontario

      Business Hour Monday – Thursday 9AM to 6PM Friday 9AM to 5PM Saturday 10AM to 4PM Sunday Closed 2 TON FOLDING CHERRY PICKER / SHOP CRANE $349.99 Work Size: 1/2T, 1T, 1-1/2T, 2T For Garage, Workshop use This Crane Delivers the Lifting Ability You Need with the Advantage of Compact Storage Folds for Easy Storage

    Some search tips we've found useful:

    Try a different or more general keyword

    Expand search location