"makita" in Tools in Saguenay

Results 1 - 30 of 30

Filters

Category

Tools

Price

Results 1 - 30 of 30

  • 9 Tool Mark Flags 3x5 feet new. 9 Drapeaux Marque D’outils 3x5p

    $15.00

    9 Tool Mark Flags 3x5 feet new. 9 Drapeaux Marque D’outils 3x5p

    Saguenay

    I have 11 Tool Brand flag. 5x (SNAP-ON) 2x (Milwaukee) 1x (MACTools) 2x (DEWALT) 1x (MAKITA) Size 3x5 feet, They are new. Made of polyester Inside and outside Price $15 each For postal delivery it’s ...

  • Visseuse à gypse Makita

    $80.00

    Visseuse à gypse Makita

    Chicoutimi

    Visseuse à gypse de marque Makita. Très peu utilisée. Achetée neuve et utilisée pour un seul projet

  • Assorted Core Bits 2,2-1/2, 3, 4,5',6 (Industrial Grade

    Please Contact

    Assorted Core Bits 2,2-1/2, 3, 4,5',6 (Industrial Grade

    Canada

    THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - NORTH YORK See addresses below Assorted Core Bits The roof-shaped guide teeth ensure improved tool alignment and increased rotational stability. 1)The wedge shape is particularly aggressive in collision with steel reinforcement 2)The effect is supported by the

  • SDS PLUS-sds max Chisels

    Please Contact

    SDS PLUS-sds max Chisels

    Canada

    THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - BRAMPTON See addresses below Visit our website For More Tools http://www.chtools.ca Special impact resistant chisel forged in one piece with high surface-harden. Optimum denudation capacity by maximum energy transmission of the hammer drill to the chisel edge.

  • SDS MAX 4-1/2(12Long) Wide Jumbo Chisel Reg $65 Sale$30

    Please Contact

    SDS MAX 4-1/2(12Long) Wide Jumbo Chisel Reg $65 Sale$30

    Canada

    THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - NORTH YORK See addresses below Assorted Core Bits (Industrial Grade) Assorted Core Bits (Industrial Grade) Industrial grade HEAVY DUTY Heavy Duty Floor Scraper Reg $299 Sale $80 Most Affordable System on the Market Common uses include: Ceramic Tile Removal Vinyl

  • MAKITA 4-1/2 In. Angle Grinder GA4530 120V 11000 RPM 6A

    $40.00

    MAKITA 4-1/2 In. Angle Grinder GA4530 120V 11000 RPM 6A

    Canada

    SKU: 117359 Model: GA4530 Condition: Used S/N: 0027331Y Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: CHINA Dimensions: 4.50 (H) x 4.50 (W) x 15.00 (L) inches Additional Description: Capacity: 4-1/2" Amp: 6A Speed: 11000 RPM For more information, please contact us at: Lenmark Industries

  • MAKITA 1/2 In. Impact Wrench Nut Runner 6905B

    $50.00

    MAKITA 1/2 In. Impact Wrench Nut Runner 6905B

    Canada

    SKU: 117343 Model: 6905B Condition: Used S/N: 343737E Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 3.50 (H) x 9.00 (W) x 10.50 (L) inches Additional Description: Amp: 4A HZ: 50-60 Hz RPM: 1700 RPM For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave,

  • MAKITA 1/2 In. Corded Hammer Drill HP1501 120V 2800 RPM 5A

    $25.00

    MAKITA 1/2 In. Corded Hammer Drill HP1501 120V 2800 RPM 5A

    Canada

    SKU: 117341 Model: HP1501 Condition: Used S/N: 253486G Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 3.00 (H) x 9.00 (W) x 11.50 (L) inches Additional Description: Capacity: 1/2" Amp: 5 A Speed: 2800 RPM For more information, please contact us at: Lenmark Industries Ltd. 27576 51a

  • KING CANADA Track Connector Kit No. KW-302

    $29.99

    KING CANADA Track Connector Kit No. KW-302

    Canada

    SKU: 61296 Model: KW-302 Condition: New Dimensions: 1.00 (H) x 4.00 (W) x 10.00 (L) inches Additional Description: Product Features - Two 50" Tracks can be joined together using this Connector Kit - Two support strips included to prevent set screws from marring the aluminum Track - Mounts in the slots on top and

  • KING CANADA 2 Pc. Clamp Kit for 50 In. Track No. KW-303

    $39.99

    KING CANADA 2 Pc. Clamp Kit for 50 In. Track No. KW-303

    Canada

    SKU: 61297 Model: KW-303 Condition: New Dimensions: 2.00 (H) x 10.00 (W) x 10.00 (L) inches Additional Description: Product Features - Secures 50" Track to material and/or workbench preventing any shifting - Clamps slide into slots underneath 50" Track Note: ? Optional clamp kit (KW-303) is compatible with Makita®

  • KING CANADA 50 In. Track For Plunge Cut Track Saw No. KW-300

    $79.99

    KING CANADA 50 In. Track For Plunge Cut Track Saw No. KW-300

    Canada

    SKU: 61294 Model: KW-300 Condition: New Dimensions: 1.00 (H) x 7.00 (W) x 50.00 (L) inches Additional Description: Product Features - Extruded aluminum construction - Rubber splinter guard indicates the cut line - Allows easy and accurate straight cuts - Two tracks can be connected together using optional Track

  • MAKITA 115 Volts 4.2 Amp Belt Sander 9030

    $300.00

    MAKITA 115 Volts 4.2 Amp Belt Sander 9030

    Canada

    SKU: 30744 Model: 9030 Condition: Used S/N: 161315E Dimensions: 3.20 (H) x 7.00 (W) x 17.00 (L) inches Additional Description: Voltage: 115 Volts Amperes: 4.2 Amp Hertz: 60 Hz Watts: 490W Max. Pressure: 1000 m/min. For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC V4W

  • MAKITA 7-1/4'' Circular Saw, with Electric Brake 5007FA

    $45.00

    MAKITA 7-1/4'' Circular Saw, with Electric Brake 5007FA

    Canada

    SKU: 24728 Model: 5007FA Condition: Used General Specifications: Blade Diameter: 7-1/4" Voltage: 120 volts Phase: Single-phase Saw Type: Mitre/Crosscut Saws Made In: CHINA Dimensions: 10.00 (H) x 7.00 (W) x 11.00 (L) inches Additional Description: Power: 2000 watts Arbor Size: 5/8" Max. Cutting Capacity (at 90°):

  • MAKITA Portable Band Saw 2107F

    $300.00

    MAKITA Portable Band Saw 2107F

    Canada

    SKU: 24661 Model: 2107F Condition: Used S/N: 53647 General Specifications: Horsepower: 1 hp Saw Type: Bandsaws Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 8.00 (H) x 11.00 (W) x 20.00 (L) inches Additional Description: Power Input: 710W Round Workpiece Capacity: 120 mm (4-3/4?)

  • MAKITA 14 in. Cut-Off Saw 2414DB

    $110.00

    MAKITA 14 in. Cut-Off Saw 2414DB

    Canada

    SKU: 24668 Model: 2414DB Condition: Used General Specifications: Horsepower: 2.2 hp Saw Type: Mitre/Crosscut Saws Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: JAPAN Dimensions: 15.00 (H) x 12.00 (W) x 23.00 (L) inches Additional Description: Wattage: 1650 watts Amps: 15 amp Blade

  • MAKITA 8-1/4 In. Table Saw 2702

    $375.00

    MAKITA 8-1/4 In. Table Saw 2702

    Canada

    SKU: 17448 Model: 2702 Condition: Used S/N: 11531 A General Specifications: Horsepower: 3 hp Table Size: 27" x 22" Blade Diameter: 8-1/4" Voltage: 120 volts Phase: Single-phase Saw Type: Table Saws Dimensions: 42.00 (H) x 25.00 (W) x 28.00 (L) inches Additional Description: Arbor: 5/8" Blade Length: ?22? No load

  • MAKITA 4-1/2 In. Angle Grinder 9524NB 120V 1100 RPM 5A

    $40.00

    MAKITA 4-1/2 In. Angle Grinder 9524NB 120V 1100 RPM 5A

    Canada

    SKU: 107741 Model: 9524NB Condition: Used S/N: 750519 Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: CHINA Dimensions: 4.50 (H) x 4.50 (W) x 15.00 (L) inches Additional Description: Capacity: 4-1/2" Amp: 5A Speed: 11000 RPM For more information, please contact us at: Lenmark Industries

  • MAKITA Screwdriver 6305BV 115V 2500 RPM 4.8A

    $60.00

    MAKITA Screwdriver 6305BV 115V 2500 RPM 4.8A

    Canada

    SKU: 107732 Model: 6805BV Condition: Used S/N: 27560E Electrical Specifications: Voltage: 115 volts Phase: Single-phase Dimensions: 4.00 (H) x 9.75 (W) x 9.75 (L) inches Additional Description: Shank Size: 1/4" Hex Amp: 4.8A Speed: 2500 RPM For more information, please contact us at: Lenmark Industries Ltd. 27576

  • MAKITA 1/2 In. Electric Drill 120V 550 RPM 6.5A

    $50.00

    MAKITA 1/2 In. Electric Drill 120V 550 RPM 6.5A

    Canada

    SKU: 107723 Condition: Used Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 3.50 (H) x 8.00 (W) x 11.00 (L) inches Additional Description: Capacity: 1/2" Amp: 6.5A Speed: 550RPM For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC V4W 4A9

  • MAKITA 7-1/4'' Circular Saw 5007NB 120V 5800 RPM 13A

    $40.00

    MAKITA 7-1/4'' Circular Saw 5007NB 120V 5800 RPM 13A

    Canada

    SKU: 107748 Model: 5007NB Condition: Used S/N: 442597 Electrical Specifications: Voltage: 12 volts Phase: Single-phase Dimensions: 11.00 (H) x 10.00 (W) x 15.00 (L) inches Additional Description: Capacity: - 90° 2-3/8" ( 60 mm) - 45° 1-3/4" (46 mm) Power: 1400W Speed: 5800 RPM For more information, please contact

  • MAKITA Reciprocating Saw JR3050T 120V 2800 SPM 9A

    $30.00

    MAKITA Reciprocating Saw JR3050T 120V 2800 SPM 9A

    Canada

    SKU: 107703 Model: JR3050T Condition: Used S/N: 06S5423 Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: CHINA Dimensions: 4.00 (H) x 7.00 (W) x 17.00 (L) inches Additional Description: Amp: 9 Amp Strokes/min: 2800 spm For more information, please contact us at: Lenmark Industries Ltd.

  • KING CANADA 6-1/2 In. Variable Speed Plunge Cut Track Saw No. KC-8365

    $349.99

    KING CANADA 6-1/2 In. Variable Speed Plunge Cut Track Saw No. KC-8365

    Canada

    SKU: 61291 Model: KC-8365 Condition: New General Specifications: Blade Diameter: 6-1/2" Voltage: 120 volts Phase: Single-phase Dimensions: 9.63 (H) x 9.00 (W) x 23.00 (L) inches Additional Description: Product Features - Plunge Cut Track Saw is ideal for smooth cutting of solid wood and plywood, especially when

  • MAKITA 1/2 In. Electric Router No. 3612BR

    $200.00

    MAKITA 1/2 In. Electric Router No. 3612BR

    Canada

    SKU: 23146 Model: 3612BR Condition: Used S/N: 160539E Dimensions: 12.00 (H) x 9.00 (W) x 85.00 (L) inches Additional Description: Continuous Rating Input: 1,530W Capacity Collet: 12mm or 1/2-inch Plunge Capacity: 0 - 65mm (0 - 2-9/16-inch) Base Dia.: 160mm (6-1/4-inch) No Load Speed: 23,000 rpm Overall Height:

  • MAKITA 10 In. Miter Saw No. 2401B

    $80.00

    MAKITA 10 In. Miter Saw No. 2401B

    Canada

    SKU: 17057 Model: 2401B Condition: Used General Specifications: Horsepower: 2.4 hp Blade Diameter: 10" Voltage: 115 volts Phase: Single-phase Saw Type: Mitre/Crosscut Saws Dimensions: 19.00 (H) x 18.10 (W) x 20.50 (L) inches Additional Description: Max RPM: 4100 For more information, please contact us at: Lenmark

  • MAKITA 1 In. SDS Plus Rotary Hammer HR2475 120V

    $60.00

    MAKITA 1 In. SDS Plus Rotary Hammer HR2475 120V

    Canada

    SKU: 107714 Model: HR2475 Condition: Used Electrical Specifications: Voltage: 120 volts Phase: Single-phase Made In: CHINA Dimensions: 3.00 (H) x 8.00 (W) x 19.00 (L) inches Additional Description: Capacity: Concrete 1", Steel 1/2" Blows Per Minute: 0 - 4,500 BPM No Load Speed: 0 - 1,100 RPM For more information,

  • MAKITA Electric Drill 120V

    $35.00

    MAKITA Electric Drill 120V

    Canada

    SKU: 107724 Condition: Used Dimensions: 7.50 (H) x 7.00 (W) x 11.00 (L) inches For more information, please contact us at: Lenmark Industries Ltd. 27576 51a Ave, Langley, BC V4W 4A9 Phone: 604.449.1880 Email: sales@lenmark.com View more products at www.lenmark.com

  • MAKITA 7-1/4 In. Circular Saw 5007FA 120V 5800 RPM 15A

    $50.00

    MAKITA 7-1/4 In. Circular Saw 5007FA 120V 5800 RPM 15A

    Canada

    SKU: 107744 Model: 5007FA Condition: Used S/N: 0049506 Electrical Specifications: Voltage: 120 volts Phase: Single-phase Dimensions: 10.00 (H) x 10.50 (W) x 12.00 (L) inches Additional Description: Power: 2000 watts Arbor Size: 5/8" Max. Cutting Capacity (at 90 deg): 2-3/8" Max. Cutting Capacity (at 45 deg): 1-3/4"

  • 4 1/4-inch 110mm Taper Fit TCT Concrete Carbide Hole Saw Dry Core Bit Wall Hole Cutter Industrial Grade

    $119.00

    4 1/4-inch 110mm Taper Fit TCT Concrete Carbide Hole Saw Dry Core Bit Wall Hole Cutter Industrial Grade

    Canada

    Shipping by seller

    4 1/4-INCH 110MM TCT CONCRETE CARBIDE HOLE SAW DRY CORE BIT WALL HOLE CUTTER INDUSTRIAL GRADE Introducing the Industrial grade SDS-Max Carbide Rotary Hammer Drill Core Bit by GTA Diamond Tools. Your ultimate solution for efficient drilling through masonry, brick, Blocks and concrete surfaces. Heavy Duty Taper

    Shipping by seller
  • The 37-pound demolition hammer Special Price Regular Price $900 - Now $499

    $499.00

    The 37-pound demolition hammer Special Price Regular Price $900 - Now $499

    Canada

    CANADIAN ELECTRICAL SAFETY CERTIFIED DRILL (CETL) SIX MONTH WARRANTY THREE LOCATIONS TO SERVE YOU PICKERING - TORONTO - BRAMPTON See addresses below Visit our website For More Tools http://www.chtools.ca hex 37-pound demolition hammer Special Price Regular Price $900 - Now $499 BRAND NEW IN THE BOX Description:

  • Perceuse rotative à marteau SDS-PLUS CAD Prix régulier 249 $ - maintenant 130 $

    $130.00

    Perceuse rotative à marteau SDS-PLUS CAD Prix régulier 249 $ - maintenant 130 $

    Québec

    PERFORATION CERTIFIÉE DE SÉCURITÉ ÉLECTRIQUE CANADIENNE (CETL) SIX MOIS GARANTISSEMENT LOCALISATION POUR VOUS SERVIR PICKERING - TORONTO - BRAMPTON Voir les adresses ci-dessous Visitez notre site Web Pour plus d'outils http://www.chtools.ca Broyeur à marteaux rotatifs SDS-PLUS GRADE INDUSTRIEL Prix spécial Prix