"ford 9 inch" in Transmission & Drivetrain in Ontario


Results 1 - 18 of 18

18 results

  • These gears are like new. Used very little, I changed to a higher ratio afyter very few runs. Phone...

    $200

    FORD 9 INCH GEARS

    Guelph

    5.0

    These gears are like new. Used very little, I changed to a higher ratio afyter very few runs. Phone Jim 519 835 5498 Days.

  • From a 1963 Galaxie. Tag says 3.50 gear ratio open carrier

    $350

    ford 9 inch rear end

    Cambridge

    5.0

    From a 1963 Galaxie. Tag says 3.50 gear ratio open carrier

  • 3.50 gear ratio excellent condition non-Posi

  • Like new STRANGE PRO GEAR 5.14 Approximately 40 passes on unit 40 spline. Was 2,300 when new Call 519-817-2091

  • ford 9 inch gear sets. can put together. please calls only. 519 88one 7056 andy

    Please Contact

    ford 9 inch

    Owen Sound

    5.0

    ford 9 inch gear sets. can put together. please calls only. 519 88one 7056 andy

  • 9inch ford rear end when bought was told it’s from a 1979 Lincoln versailles

    $950

    ford 9 inch with disc brakes

    City of Toronto

    4.8

    9inch ford rear end when bought was told it’s from a 1979 Lincoln versailles

  • Early Ford 9 inch rear end . Measures aprox 53.25 flange to flange . Excellent for early Mustang Rat Rod etc . $250-

  • US STRANGE FORD 9 INCH, PRO GEARS, GEAR RATIO 4.86 TO 1, WITH BRAND NEW TIMKEN PINION BEARINGS, GEAR...

    $650

    FORD 9 INCH DIFF GEARS

    Bolton

    5.0

    US STRANGE FORD 9 INCH, PRO GEARS, GEAR RATIO 4.86 TO 1, WITH BRAND NEW TIMKEN PINION BEARINGS, GEARS ARE BRAND NEW, NEVER INSTALLED

  • BRAND NEW FORD MOTORSPORT RACING 9 INCH CENTER SECTION/THIRD MEMBER, NODULAR IRON PRO N CASE, 3.25 INCHES BEARING CASE, LARGE FORD STEEL CAPS, 5/8 INCHES CAP BOLTS, RATED AT 1000 HORSEPOWER, PLUS, ...

  • Ford 9 inch , New 3.50 gear ,, New 28 spline Traction-lok (posi ) ,, New bearings and seal ,, standa...

    $1,600

    9 inch Ford

    Pelee Island

    5.0

    Ford 9 inch , New 3.50 gear ,, New 28 spline Traction-lok (posi ) ,, New bearings and seal ,, standard case ,, 1310 car yoke ,, $1600.00 Ford 9 inch ,, New 3.50 gear , New 31 spline Auburn posi unit ...

  • New Strange Engineering nodular case ,, New 4.30 gear, New 35 spline Detroit Locker ,, New Bearings...

    $2,600

    Ford 9 inch center section

    Pelee Island

    5.0

    New Strange Engineering nodular case ,, New 4.30 gear, New 35 spline Detroit Locker ,, New Bearings and seal ,, Daytona pinion support ,, New MW 1350 billet yoke -- $2600.00 --- shipping is available ...

  • This unused Mini spool is designed to connect shafts, ensuring efficient power transmission with its toothed interior, though showing signs of rust from humidity in storage, it is unused. Additional ...

  • For sale: Ford 9 inch Rear End Differentials. Asking 200 OBO each Cash Only. - 9 inch / 3.0 - 9 inch...

    $200

    Ford 9" Rear End Differentials

    City of Toronto

    5.0

    For sale: Ford 9 inch Rear End Differentials. Asking 200 OBO each Cash Only. - 9 inch / 3.0 - 9 inch / 4.85 Message if interested to arrange a time to pick up. Item is for pick up only at Morningside ...

  • For sale: Ford 9 inch 3.5 Rear End Differential. Asking 200 OBO Cash Only. Message if interested to arrange a time to pick up. Item is for pick up only at Morningside and Lawrence in Scarborough. See ...

  • For sale: Ford 9 inch 3.50 gear Rear End Differential. Asking 200 OBO Cash Only. Message if interested to arrange a time to pick up. Item is for pick up only at Morningside and Lawrence in ...

  • For sale: Ford 9 inch 4.57 gear Rear End Differential. Asking 200 OBO Cash Only. Message if interested to arrange a time to pick up. Item is for pick up only at Morningside and Lawrence in ...

  • Ford nine-inch gear set and differential from a 1971 Ford Torino. 3:00 open. Has 62,000 miles on it....

    $100

    Ford 9" gear set

    Binbrook

    4.9

    Ford nine-inch gear set and differential from a 1971 Ford Torino. 3:00 open. Has 62,000 miles on it. $100 OBO

  • New in box. Ford truck Ring gear and pinion assembly. Still factory sealed. Fits:F350 , F450 , F550 ; This is a 4.10 Gear Ratio set. Part number is HC3Z-4209-K.See below for other part numbers and ...

Some search tips we've found useful:

Try a different or more general keyword

Expand search location